| Notizen vor der Bestellung: |
| In den meisten Fällen, wenn wählen Sie economy shipping, Verschiffenzeit ist ungefähr 20 bis 35 Tage. |
| Treten Sie mit uns bitte in Verbindung, bevor Sie Debatte öffnen, versprechen wir, jedes Problem sorgfältig zu lösen. |
| Wir sind NICHT für irgendeine Zollgebühr oder Importabgabe verantwortlich. |
|
|
Features:
1. Powered by micro motors of compact-structured Series excitation type.
2. Drive motor: quality engineering Cast aluminum molding.
3. Stainless steel operation head and speed controller.
4. Digital display.
5. Speed controller applies IC speed detection -the constant power speed regulation technology, which offers effective compensation for the speed variation due to Variation of load and power supply voltage fluctuation.
|
| Model | AD300L-H | | Rated voltage | 220±10% VAC | | Rated frequency | 50/60 Hz | | Input power | 510W | | Output power | 300W | | Rated torque | 96 N·cm | | Work mode | S1 (continuous) | | Speed control | Yes | | Speed range | 5000~18000 rpm | | Dynamic detection speed | Yes | | Speed memory function | Yes | | Overload protection function | Yes | | Speed display | ×10 rpm LED | | Timing control range | 1～1000 min | | Work head maximum torque | 92 N.cm | | Work head Material | stainless steel 304# | | Bearing material | PTFE | | Standard configuration | 28G, 36G | | Permissible ambient temperature | Lower than 40°C | | Permissible relative humidity | Less than 80% | | Size of the mixer (T x B x H) | 215×310×720 mm | | Product Weight | 9.7 kg | | Work head parameter | | Work head Model | 28 G | 36 G | | Mixing capacity (H2O) ml | 90~7000 | 150~13000 | | Mixing processing viscosity (cp) | 6000 | 7000 | | Rotor maximum linear velocity (m/s) | 19 | 27 | | Work head Immersed in liquid height (mm) | 60/160 | 60/160 | | Work head Diameter (mm) | 28 | 36 | | Work head length (mm) | 240 | 240 | | Permissible ambient temperature (°C) | 120 | 120 |
|
|
Warnings:
1)To protect the electrical motor, please do not run the mixer over 20 minutes consecutively for each use.
2) Please ensure the motor cools down completely after each use and before the next use; otherwise, the motor may be damaged.
3) Idling may damage the machine. Please place the operating head in the liquid before use. Then turn on the machine, and rotate the speed adjusting knob rightward slowly.
|
The original voltage is 230 V AC±10%, if you want to use it with 110 V AC, we can configurate a transformer for you with an extra charge: USD $150. If you need, please contact us.
|
|
| order | item | number | order | item | number | | 1 | Heterogeneous host | 1 | 6 | Operating head | 2 | | 2 | Base | 1 | 7 | Brusher(Spare) | 1 | | 3 | Supporting stand | 2 | 8 | Product certification | 1 | | 4 | Beam | 1 | 9 | Operation manual | 1 | | 5 | Supporting and fixing frame | 1 | | |
|