AN5477 Novak 1S LiPo Booster Module (#5477)



The Novak 1S LiPo Booster Module (#5477) is for single-cell racing; it replaces the receiver battery pack and will provide a constant 6 volts and 3 amps of power to the receiver and servo in your race set-up. This module connects to your main battery pack and will actually “boost” the battery pack’s 3-4 volts to a standard 6 volts for the duration of the run-- which allows the receiver and servo to operate as they are intended to. There is no need for special wiring or recharging of a receiver battery pack. Simply connect the module’s power wires to the main battery pack or the ESC’s battery terminals, and plug the harness into your receiver’s battery slot.

The Novak 1S Booster Module easy to connect, extremely small and lightweight. It is compatible with brushless or brush speed controls that would normally operate with a 2-3S LiPo pack. By increasing the battery pack voltage to the receiver and servo, the module allows you to use any radio receiver in single-cell applications, including spread spectrum radios. The usual voltage fluctuations that cause reception issues with your radio using 1S LiPo packs are no longer a concern. It is recommended to use the Novak Glitch Buster Capacitor (#5626) with 2.4GHz radio systems to ensure trouble-free operation.

Note: This unit replaces the Smart Boost 1-Cell Step-Up Module (#5474), and does not include LiPo cutoff circuitry.

FEATURES

  • Increases a 1-cell Li-Po battery pack's voltage from 3.3V - 4.2V to 6V, which provides enough power to run almost any servo or receiver
  • Provides consistent power to vehicle’s electronics during the entire charge
  • On/Off Switch for clean installation and easy operation
  • Universal JST Plug that fits all popular brand receivers
  • Compatible with brushless and brush speed controls

    SPECIFICATIONS

  • Module Size: 0.39” x 1.18” (10 x 30 mm)
  • Weight: 0.43 oz (12.2 g)
  • Input Cells: 1S LiPo
  • Output Voltage: 6 Volts
  • Output Current: 3 Amps
  • Wire Size: 20 GA silicone battery power wire (red/black)
  • LED: Blue (on-board)

  • [Terms & Conditions]


    ? Shipment

     We will ship your order within 2 business days via post airmail. It will usually take 15 business days after shipment. 

     Note: For international buyers, please bear in mind that international shipping may be subject to import duties or other taxes.


    ? Dispatch Times

     We normally ship orders within 24 hours once the payment is received except Public holidays. 

     All orders are wrapped very carefully before despatch. Once your order has been posted we will contact you by emaill. 

     Please allow up to 28 days for delivery in case of postal delays.


    ? About Us

     We stock a wide selection of plastic model kits, aftermarket upgrade/detailing sets, tools.

     (Worldwide Shipping) All orders are despatched within 24hrs. All in stock items are ready to ship.