My Buy it now is less than cost of materials only! This car comes with about everything I could think of to complete it. It cannot be bought new or built any cheaper (unless you put used or inferior parts in it)! This is probably the fastest Lotus 7 type car out there that you can build starting with a kit! It should make near or over 500HP once tuned and I believe it should weigh around ~1600-1700lbs. Since this is the XL, it is ideal for Road Racing and/or larger framed drivers. It has a stance near that of a Corvette. The XL has enough room to even add AC and other options if you wanted.
I had to choose "Clear" as the title type above, but this this comes with an original Manufacturers Certificate of Origin
only that states “Replica / Facsimile Of circa 1962 Lotus 7” and is intended to
be street legal by following the normal kit car or special construction rules
of your state. I will also be providing all the documentation and receipts for parts
I will let the build write up speak for itself as far as
the time, care, planning, and fabrication work that has been done so far.
http://www.usa7s.net/vb/showthread.php?9794-Brunton-StalkerXL-23-Build
There is no wait time for a kit with this one or a huge amount of precious time
to waste researching and gathering up parts to complete it. You will be getting my time of parts research, engineering, fabrication, and planning at no cost. This car could be
completed fairly quick at this point for racing or street fun. It is ready to finish
with pretty much everything to finish it included. Even the little stuff right down to the license plate frame etc. are all included. As a
disclaimer, you might have to buy a couple small things I did not think of or
other items you might wish to add or modify.
This is not a cheap or low budget build using sub-par or used parts. It is a high level build with all brand new parts and drive train! There are a lot of custom fabricated parts and extra work done to this car that you won't likely get on any other, or be able to buy as standard options if you had one built.
I have 1115+ high res photos of every part of the build so far. Every single
nut, bolt, and part is completely documented in an Excel spreadsheet with part
numbers, date of purchase, vendor, the date of installation for parts that have
been fitted etc. I will also be supplying another 800+ files of parts data,
instruction manuals, all the build files and videos, CAD files of parts I designed
and machined, CAM files, parts data, electrical information, data sheets
and instruction manuals for parts, pictures of other builds, etc. This is
over 13 gigs in total!
I would be glad to share more info with any prospective buyers so you know
exactly what you are getting. You will know every single part, part
number, and where it came from. I have a huge stack of paperwork and receipts
as well as the electronic files. This
car can't be done for less money without using used parts or sacrificing on
the build quality. This will be a bargain to anyone looking at buying a
new kit or that was considering buying a turn key car.
Summary of some of the features:
There is much more than that, but a
lot is shown in the linked build. I will be glad to answer emails or
take calls to assist with the rest of the build if questions need answered
after you purchase it.
This car could be finished fairly quickly given your amount
of free time at this point and depending on how much
more you want to deviate from the original kit.
Here is a pretty complete list of all the parts you will be getting with the car. Many of them are
already installed as you can see from the build log. This will give you an idea of what it really takes to build
this and what you will be getting. You won't be shelling out a bunch more money
on parts to finish it and you will be doing way less work than starting from
scratch.
ITEM # |
Description |
QTY |
Level 1 Kit |
StalkerXL Classic Level 1 Kit |
1 |
Level 2 Kit |
StalkerXL Classic Level 2 Upgrades |
1 |
Level 3 Kit |
StalkerXL Classic Level 3 Upgrades |
1 |
Roll Bar Front |
Option - Roll Cage Front Section - T Bar Style |
1 |
Aluminum Shocks |
Option - Aluminum GAZ Shock Upgrade |
1 |
EPS |
Option - Electric Power Steering With U-Joints |
1 |
Fuel Line Kit |
Option - Fuel Line Kit |
1 |
Fuel Tank - Alum |
Option - Custom Aluminum Fuel Tank With Sump |
1 |
Radiator |
Custom Aluminum Radiator w/-AN Connectors |
1 |
NAL-19301358 |
LS376/480 Crate Engine, Internal Engine Balance, Chevy, 6.2L |
1 |
TUET11009 |
Tremec Close Ratio T56 Magnum for GM 6-Speed |
1 |
BHCV-11001 |
Bellhousing |
1 |
ELFO-10001 |
Speedometer Sending Unit Wiring Harness Ford TKO and All Magnums |
1 |
|
Bolt, Allen Head, Black, M10X1.5X40, With Thick Small OD Split Lockwasher |
7 |
|
Bolt, Flange Hex Head, Zinc Plated, M10X1.5-40MM |
8 |
176164 |
#8 3/4" Pan Head Self Drilling Screws, Square Drive, 410 Stainless Steel, Inorganic Coating |
350 |
NAL-12624617 |
Oil Pan, Rear Wet Sump, 1-piece Rear Main Seal Style, Aluminum, Natural, Chevy, 6.0L LS, 6.2L LS3, 6.2L LS9 |
1 |
NAL-12558189 |
DEFLECTOR GM# 12558189 |
1 |
NAL-12570787 |
TUBE GM# 12570787 |
1 |
NAL-12570788 |
C6 LS2 Dipstick GM# 12570788 |
1 |
NAL-12624497 |
PICKUP GM# 12624497 |
1 |
25873500 |
F-Carrier, Rear Differntial, 2005-07 Cadillac CTS W/LSD 3.42 Gear |
1 |
176165 |
#8 1" Pan Head Self Drilling Screws, Square Drive, 410 Stainless Steel, Inorganic Coating |
100 |
4050480 |
Goodyear Gatorback Poly V-Belt |
1 |
10465385* |
Starter (Comes with one 11610787 bolt), *Crosses for this PN that is recommended in engine manual |
1 |
11610787* |
10mm x 1.5 x 113 Starter Bolt #85-1507 *GM Part Number, spec says 116mm long |
1 |
14809 |
Alternator-Premium Remy 14809 Reman |
1 |
12569301 |
TENSIONER - DRIVE BELT |
1 |
11515768 |
BOLT-10X1.5X40MM- 15MM DRIVE |
2 |
12561465 |
BOLT,CLU PRESS PLT(HFH M10X1.5X25 10.9 7114M HDR PT,17.3 FLANGE) - QTY 10 |
10 |
11516424 |
BOLT, (M6X1X25 9.8 14.2OD)(08.900) |
2 |
92262148 |
COVER. Flywheel & Clutch & Converter Housing. 92262148 |
1 |
92169247 |
COVER. Flywheel & Clutch & Converter Housing. |
1 |
12560226 |
COVER BOLTS M6.0x1.0x14.5 |
2 |
FR1716DD |
Flaming River FR1716DD Billet-Joint 3/4" DD X 3/4" DD Steering U-Joint |
1 |
772 |
Grant 772 Wheel Black Leather 12" Diameter 3" Dish w/ Horn Button |
1 |
WIL-270-2016 |
Wilwood Quick Release Steering Hub |
1 |
|
36" Universal 3/4" DD Stainless Steel Steering Shaft |
2 |
1750757 |
Steel Heim Joint Rod Ends for Steering Shaft, 3/4-16 RH Male .757 Hole |
1 |
1750247 |
Thin Steel Jam Nut, 3/4-16 RH |
2 |
91032375-750 |
Firewall Mount Flanged Bearing for 3/4" Steering Shaft |
1 |
481201 |
LS Low Oil Level Sensor Plug w/ 1/8 NPT Port |
1 |
ATM-2277 |
Auto Meter Adapter,
1/8 in. NPT Female, 12mm x 1.5 Male |
1 |
SPE-6285 |
Spectre Performance Gear Shift Boot, Rectangular, 5.25 in.x 4.125 in., Chrome Retainer, Manual Transmission |
1 |
OER-9793565 |
OER GM Manual Transmission Reproduction Chrome Shift Knob, Steel, Round, Chrome, 3/8"-16 Thread |
1 |
EM3125 |
WESTAR Manual Transmission Mount 2000 CHEVROLET CAMARO 5.7L V8 |
1 |
P31371 |
Power Performance Drilled & Slotted Zinc Plated Brake Rotors, 323mm (12.7165"), 24mm Thick, 08' RX8 Sport (fronts, pair) |
2 |
1133815 |
3/8" Grade 8 Yellow Zinc Finish SAE Thru-Hardened Flat Washer, ID .406", OD .812", Nom. Thickness .062" |
100 |
GSL392/400-939 |
Walbro GSL392 255LPH Universal Inline External High Pressure Fuel Pump With 400-939 Install Kit |
1 |
1136266 |
3/4"-16 Zinc Plated Hex Jam Nut, Pack 10 Outside nuts for spindle rod ends |
1 |
1137082 |
3/8"-24 Yellow Zinc Finish NE Grade 8 Nylon Insert Lock Nut, Pack 50 |
1 |
114937 |
Borgeson Steering U-Joint Stainless Steel 3/4" DD X 3/4"-48 Spline |
1 |
|
1/2"-13 2-1/2" Grade 8 bolts |
4 |
CF9863 |
14" Universal Cooling Fan W/ Mounting Brackets 14" x 14-3/4" x 2-7/8" 2383CFM @ 7.8A |
1 |
BPS |
0 Tolerance Brass Pin Switch |
1 |
K891 |
Heavy Duty Metal Toggle Switch w/ Silver Contacts & Screw Terminals, 25 amps @ 12 volts ON-OFF |
2 |
K891C |
Splashproof Cover Fits 1/2” Toggle Switches |
2 |
CBM-10612 |
CBM Motorsports LS3 Straight Billet Water Neck T-Stat -16AN Fitting |
1 |
CBM-10620 |
CBM Motorsport GM Water Pump Top Fitting -16AN Short LS1 LS2 LS3 LS6 LS7 |
1 |
|
Push To Start Button RFID Engine Lock Keyless Entry Immobilizer |
1 |
|
12-24V Motorbike Motorcycle Car Cigarette Lighter Socket Power Outlet Plug |
1 |
|
Speedhut Custom 6 gauge set |
1 |
BRL-2018 |
Braille Battery Battery Mounting Kit, Bolt-Down, Lay Down Bracket, Billet Aluminum |
1 |
BRL-B2015 |
Braille Battery No-Weight Standard Battery, AGM, 12 V, Starting, 425 Cold Cranking Amps, Top and Side Terminals |
1 |
AEI-13301 |
Aeromotive Universal Bypass Regulators Fuel Pressure Regulator, 3-65 psi, Red and Black Anodized, Universal |
1 |
SPE-9732 |
Spectre Performance Air Filter, Air Filter Element, Round Tapered, Cotton Gauze, Red, 10.25 in. Height |
1 |
SPE-9771 |
Spectre Performance Intake Coupler silicone, Tubing Coupler, Black, Straight, 4.00 in. I.D., Clamps Included |
1 |
SPE-97990 |
Spectre Performance Air Intake Tube, Aluminum, Polished, 90 Degree Elbow, 4.0 in. Diameter |
1 |
ANI-2436 |
Anchor Industries Motor Mount, 1988 Chevrolet S10 Pickup 2.8L 173cid V6 |
2 |
AWW-500735 |
American Autowire Battery Disconnect Boots, Red, Rubber, Pair |
1 |
CSI-970FITTING |
CSR NPT to Smooth Hose Adapter, 1/8 in. NPT x 1/4 Straight Barb, Aluminum |
1 |
EDD-844440 |
Edelmann Clamp-Style NPT to Hose Barb Fitting, Brass, Straight, 1/4 in. Hose Barb, to 1/4 in NPT Male Threads |
1 |
FRA-840316 |
Fragola Performance Systems Premium Black Nylon Race Hose, -16 AN Diameter, 3.0 ft. Length |
1 |
GAR-J9022 |
Gardner-Westcott Street Elbow, 90 Degree, Chrome Plated Brass, 1/4 in. NPT Male, 1/4 in. NPT Female, |
1 |
GFR-6000BK |
G-FORCE Latch & Link Individual Shoulder 5 Point Harness Set, Latch, Individual-Type, Bolt-In, Floor/Roll Bar Mount, Black |
2 |
HRE-3424 |
Howe Radiator Surge Tank, Aluminum, Natural, 6 in. Length, 3.0 in. Diameter, 4.375 in. Overall Height |
1 |
MOR-63401 |
Moroso Mounting Bracket, Overflow Tank, Clamp Mount, 3 in., Steel, Zinc Plated |
1 |
MOR-63657 |
Moroso Overflow Tank, 1 qt., Round, Plastic, Black, 1/4 in. NPT, Inlet/Outlet, Universal |
1 |
MOR-74101120 |
Moroso Battery Disconnect Switch Decal, On-Off Logo, Red/Black, 2.75 in. x 2.25 in |
1 |
NAL-19166574 |
Chevrolet Performance MAF Sensor Housing Adapter, Aluminum, Natural |
1 |
RED-80301 |
Red Line Friction Modifier and Break-In Additive, Friction Modifier, for Clutch-Type Limited-Slip Differentials, 4 fluid oz. |
1 |
RNB-55109 |
Dorman Tee Fittings Set, Brass, Natural, 1/4 in., 5/16 in., & 3/8 in., Hose Barb, Set of 3 |
1 |
RUS-644120 |
Russell Performance Push-On EFI Fitting, Straight, Male -6 AN, Female Quick-Connect 3/8 in., Blue Anodized |
1 |
RUS-661090 |
Russell Tee Adapter Fittings, -8 AN Male, -8 AN Male, 3/8 in. NPT Male on Branch, Aluminum, Blue Anodized |
1 |
UPD-S1201 |
United Pacific Battery Disconnect Switch, Manual, Rotary, 250 Continuous Amps |
1 |
S79 |
Fuel Pressure Gauge, Fuel Pressure, 0-100 psi, 1 1/2 in., Analog, Mechanical |
1 |
SNN-10234 |
Stant Radiator Cap, Steel, Natural, 18 psi, 2000 Chevrolet Camaro SS |
1 |
SUM-220586B |
Summit Racing Fitting, Hose End, 45 Degree, -16 AN Hose to Female -16 AN, Aluminum, Black Anodized |
1 |
SUM-220587B |
Summit Racing Fitting, Hose End, 90 Degree, -16 AN Hose to Female -16 AN, Aluminum, Black Anodized |
2 |
SUM-220590B |
Summit Racing Fitting, Hose End, Straight, -16 AN Hose to Female -16 AN, Aluminum, Black Anodized |
3 |
SUM-220846B |
Summit Racing AN to NPT Adapter Fitting, Straight, Male -8 AN to Male 3/8 in. NPT, Aluminum, Black Anodized |
1 |
SUM-220847B |
Summit Racing AN to NPT Adapter Fitting, Straight, Male -8 AN to Male 1/2 in. NPT, Aluminum, Black Anodized |
1 |
SUM-220887B |
Summit Racing Hose End Fitting, 90 Degree, -8 AN Hose to Female -8 AN, Aluminum, Black Anodized |
5 |
SUM-240810B |
Summit Racing® Braided Nylon Hose, Black, -8 AN, 10 ft. Length |
1 |
SUM-G1480 |
Summit Racing Plugs Fittings, Internal Allen Head Pipe Plug, 1/8 in. NPT, Steel, Chrome, Set of 4 |
1 |
SUM-G1481 |
Summit Racing Plug Fittings, Internal Allen Head Pipe Plug, 1/4 in. NPT, Steel, Chrome, Set of 4 |
1 |
SUN-CP7591 |
Sunpro Fuel Level Gauge Sending Unit, Electrical, 240 ohms Empty, 33 ohms Full, Kit |
1 |
WLO-250-2T |
Wolo Mini But Loud Disc Electric Horns, OE Horn, Mini, Low Tone, 12 V, 110 dB, Chrome |
1 |
89-1069SS |
Protex-SS Stainless Steel Protex CatchBolt Flat Panel Body Latches |
4 |
53181542N1 |
XXR 531 18x11 Flat Black 5-100/5-114.3 [+20mm] |
2 |
53189542N1 |
XXR 531 18x9.5 Flat Black 5-100/5-114.3 [+20mm] |
2 |
1007 |
Signal Dynamics Penta-Star Turn Signal Control Module |
1 |
1133817 |
1/2" Yellow Zinc Finish SAE Thru-Hardened Flat Washer, .531" ID, 1.062" OD, .095" Nom Thickness, Pack of 25 |
1 |
|
2 Wheel Adapter Spacers 5X4.5" (5x114.3mm), 12X1.5 Studs, 1.5" (38mm) Thick, 74mm Center Bore |
1 |
TR 413 |
5 Short Rubber Snap In Valve Stem |
4 |
|
20 Bulge Acorn Lug Nuts, 1/2"-20, Open End, USA Chrome, .83" Tall, 60º Taper Bulge Seat, SCM 435 Cold Forged Steel |
1 |
|
20 Black 6 Spline Tuner Racing Lug Nuts & 2 Keys 12x1.5mm, 1.38" Tall, 60º Taper Bulge Seat, SCM 435 Cold Forged Steel |
1 |
|
First Inertia Switch Vehicle crash sensor Standard Ignition Electric Fuel Pump & Connector w/ 30cm cable |
1 |
162820 |
TOYO Proxes R888 315/30ZR18 98Y |
2 |
160980 |
TOYO Proxes R888 255/35ZR18 94Y RD |
2 |
|
Land Rover Defender Rear Stop &Tail Light Unit +Stainless Steel Screws Upto 1994 |
4 |
|
4x BAY15D 1157 Red Car Tail Stop Brake Light Super Bright 64 SMD LED Bulb 12V |
1 |
92595 |
Custom Accessories Lighted License Plate Frame with Brake Light |
1 |
79150 |
Plastic License Plate Mounting Plate Bracket & Fastener Bolts for Auto-Car-Truck |
1 |
|
23MM CREE LED Eagle Eye White Light Daytime Running DRL Light Car Motor O505 |
2 |
|
GE NIGHTHAWK LED 7" Round LED Replacement Headlamp |
2 |
91101007-1 |
Stainless Steel Deitz Type 7 Inch Headlight Bucket |
2 |
91064017 |
Speedway Economy 12 Circuit Wiring Harness |
1 |
91064602 |
GM Style Billet Street Rod Headlight Switch |
1 |
91064054 |
Universal Dimmer Switch |
1 |
M1-2A-13-5 |
Southco Push to Close Turn to Open Latches |
2 |
|
Stainless Steel Piano Hinge 3/4" x 3/4" x .038", 30" Long, With Holes 3" On Center |
1 |
N129-072 |
National Zinc Plated Extra Heavy 5" Gate Door T Hinge |
2 |
688070 |
Custom Chrome Jammer Cycle Products 2" Custom Bullet Lights, Black, Dual Fillament, Pair |
1 |
|
New AC 250V 15A ON/OFF/ON Momentary SPDT Toggle Switch with Waterproof Boot |
1 |
|
5x 16mm Start Horn Momentary Black Metal Push Button Switch With Screw Terminal |
1 |
KIR-47741 |
Kirkey Seat Cover, Highback, 20 Degree Layback, 17.00 in. Width, Black , Airknit |
2 |
KIR-47700 |
Kirkey Seat, Aluminum, Intermediate Road Race, 15 Degree Layback, 17 in. Hip Width |
2 |
|
GM Headlight Switch Harness Connector, Fits 1995217, GM 1968 - 91 |
1 |
22535 |
Longacre Rear View Mirror, Panoramic, 14", Aluminum/ABS Plastic, 1/2 in.-2 1/2 in. Range, For 1-1/2" Roll Bar. |
1 |
|
2x 1157 2057 Bay15d 13SMD 5050 LED Scooter Auto Rear Brake Light Amber |
1 |
CGT-CFA-L |
Club Series GT Mirror - Club Series GT Mirror Carbon Fiber Angle Stem Left |
1 |
CGT-CFA-R |
Club Series GT Mirror - Club Series GT Mirror Carbon Fiber Angle Stem Right |
1 |
|
Waterproof, Stainless Steel, Power Switch, Momentary, Green LED, 22mm Hole, Power Symbol on Face |
1 |
|
Black, 19mm Hole, Green, Momentary, LED 12V Push Button Switch, Power Symbol on Face |
1 |
|
22mm Hole, 12V, Black Metal Push Button Switch LED Ring, Green, Momentary |
1 |
|
Red Ring, LED DPST, 1NO 1NC, 22mm Hole, Panel Mount, Momentary, Metal Push Button Switch, |
1 |
|
Red Illuminated Ring, Bulgin Style, Momentary, 19mm Hole, Black Housing (Says 22mm) |
1 |
|
12V, 19mm Hole, Metal Push Button Switch, Momentary, Red, LED, Waterproof, Flat head |
1 |
|
22mm Hole, 12V Black Metal Push Button Switch, Angel Eye/Power LED Indicator, Momentary, Red |
1 |
3594 |
Draw-Tite Sportframe Drawbar 4" Rise 2000# Kit |
1 |
HM48030 |
Hopkins Endurance 4-Way Flat Trailer Connector Socket - Vehicle End - Ergonomic Design |
1 |
49506 |
Curt Manufacturing 6 In Receiver Tube 1 1/4 In X 1 1/4 In Raw Finish |
1 |
19132947 |
GM OEM Axle-Rear-Housing Assembly Vent |
1 |
0176162 |
#8 1/2" Pan Head Self Drilling Screws, Square Drive, 410 Stainless Steel, Inorganic Coating |
150 |
59214 |
Permatex High Temperature Thread Sealant .2 FL OZ NAPA 765-2648 |
1 |
|
Rotary Switch Single Pole Double Throw Momentary On-Off-Momentary On 10amp 12VDC |
1 |
715BM4011 |
Set of four aluminum spacers 1/2" x 1-3/8" spacers. Hole is 3/8". |
1 |
1272T37 |
Multipurpose 304 Stainless Steel Rod, 7 mm Diameter, 1-1/2' Long |
1 |
1170856 |
#8-32 NM 18-8 Stainless Steel Nylon Insert Lock Nut (Package of 100) |
8 |
1171207 |
#8 x 0.750" 18-8 Stainless Steel Fender Washer (Package of 100) |
8 |
1171057 |
#8 18-8 Stainless Steel Medium Split Lock Washer (Package of 100) |
16 |
1173722 |
#8-32 x 1/2" 18-8 Stainless Steel Button Head Socket Cap Screw (Package of 50) |
12 |
73723 |
#8-32 x 5/8" 18-8 Stainless Steel Button Head Socket Cap Screw |
4 |
|
Socket button head, Stainless steel 18-8, 5/16"-18 x 3/4" |
4 |
|
Fender washers, Stainless steel 18-8, 5/16" x 1-1/2" |
4 |
|
Flat washers, Stainless steel 18-8, 5/16" |
4 |
|
Hex lock nuts nylon insert, Stainless steel 18-8, 5/16"-18 |
4 |
|
Neoprene Rubber Strips, Adhesive Backed, .062" THK x .500" WIDE, 10FT |
2 |
23-464A |
Canton Racing Fittings, Reducers, -12 AN O-Ring Male to -8 AN Male, Straight, Aluminum, Natural, Pair |
2 |
CTR-25-911 |
Fuel Filter, Universal, Canister, 1 Micron, Aluminum, Red Anodized |
1 |
EAR-AT916108ERL |
Fitting, Straight, -8 AN Female to 3/8 in. NPT Male, Aluminum, Black Anodized |
1 |
DER-98205 |
Derale Performance AN Hose Barb Fitting, Straight, Aluminum, Natural, Male -8 AN, Hose Barb 1/2 in |
1 |
SUM-230118R |
Fuel Filter, Inline Mount, Billet Aluminum, Red, 100 Microns, -8 AN Inlet/Outlet |
1 |
VPE-2167 |
Vibrant Performance Crankcase Breather Filter, Clamp-On, Round, Chrome, 2.125" Diameter, 2.625" Height, 1/2" Inlet |
1 |
RUS-644133 |
Russell Performance Push-On EFI Fitting, Straight, Male -8 AN, Female Quick-Connect 3/8", Black Anodized |
1 |
|
Stainless Steel Line 90° Adaptor, -8 AN Black |
5 |
|
Stainless Steel Line Straight Adaptor, -8 AN Black |
5 |
|
AN to NPT Adaptor, -8 AN to 3/8'' NPT Black |
2 |
|
PTFE Braided Stainless Steel Lines, -8 AN, per ft. |
25 |
|
AN Lines and Fittings Pressure Test Kit: -8AN |
1 |
S6304564 |
Nippondenso, RF Type, Alternator Repair Plug Harness (Brand says Henko on eBay add) |
1 |
|
FITTING WALBRO EXTERNAL FUEL PUMP M10x1.0 to 8 AN Black male adapter |
2 |
18844 |
3/8"-24 x 3" Yellow Zinc Finish SAE J429 Grade 8 Hex Cap Screw |
2 |
ROD EMR05 |
5/16" RH Rod End |
1 |
ROD EFR05 |
Female 5/16" RH Rod End |
1 |
|
Misc. Grade 8 Hardware for Throttle Pedal |
1 |
|
90 degree Swivel Female to Female Flare Union Adapter Fitting -8 AN Full Flow |
1 |
890134 |
2Pk 1/4" Hitch Pin Clips |
1 |
|
Hood Hinge l Assy 11" Nascar IMCA Racing |
2 |
7630800402 |
Fiberglass Resin Bondo 1 Qt |
1 |
7630800912 |
Fiberglass Resin Hardener Bondo |
1 |
072181762961-130 |
Waxed Paper |
1 |
BDO 404 |
128oz Fiberglass Resin |
1 |
TL-HCR-6710x73 |
67.10mm ID x 73.10mm OD - Polycarbonate Hub Centric Rings - Set of 4 |
1 |
|
Stainless 1/4-20 Hardware, 3/4 Socket Button head bolts (4), Washers (8), Plastic washers 1.25" Diameter |
1 |
|
1/2-13 x 3" Grade 8 Bolts |
2 |
|
3/8-24 x 1.25" Grade 8 bolts |
4 |
|
3/8-24 x 2" Grade 8 bolts |
4 |
DP10X1.00AHSS |
Stainless Metric Drain Plug 10mm X 1.00 AHSS |
1 |
BL3/16-25 |
Coiled brake line - Copper Nickel 3/16" x 25' |
10 |
NNFH12YLW |
Nylock Flange Nut Yellow Zinc |
3 |
WF12YLW |
M12, 12mm Metric flat washer DIN 125A, Yellow Zinc plated I.D: 12mm O.D: 24mm Thickness: 2.5mm |
3 |
BH12X60 |
M12x1.75x60, Metric hardened hex bolt, DIN 931, class 10.9, 19mm wrench size, yellow zinc |
3 |
S14 |
14 Gauge Steeel Sheet 14" x 21" Drop |
1 |
IPS080-R |
Mechanical Parking Brake Caliper - Right Hand Pull (Made for 24mm thick rotor) |
1 |
IPS080-L |
Mechanical Parking Brake Caliper - Left Hand Pull (Made for 24mm thick rotor) |
1 |
IPS080-BK |
Optional Caliper Mount Bracket Set 7/16"-14 Stainless Insert Mounting Holes |
1 |
IPS080-CB1 |
Optional Cable Bracket Set (Modified with 1/2"-20 threaded hole) |
1 |
LOK-XEHB7000F |
Lokar Emergency Hand BrakeBrake, Midnight, Black Powdercoat Steel, Floor Mount, 11.5 in. Handle |
1 |
LOK-EHB-7001 |
Lokar Emergency Brake Warning Indicator Switch Kit |
1 |
LOK-X70EHBF |
Lokar Emergency Hand Brake Boot, Black Naugahyde Boot, Floor Mount, Includes Black Boot Ring |
1 |
BEQ-EZ-2 |
Emergency Brake Equalizer Bar |
1 |
B-E-2-8 |
Bolt On Brake Bracket (DOUBLE) 1/2 Hole |
1 |
|
3/8"-16 x 2.5" Stainless Steel Bolt |
2 |
|
3/8"-16 Stainless Nylock Nut |
2 |
309025 |
High Temperature Red Silicone Snap Grommets, Fit 5/8" Hole, 3/8" ID, 1-1/8" OD, 7/8" Thick, Max Bracket 1/8", Qty 2 |
1 |
309025 |
High Temperature Red Silicone Snap Grommets, Fit 5/8" Hole, 3/8" ID, 1-1/8" OD, 7/8" Thick, Max Bracket 1/8", Qty 2 |
1 |
AL388 |
3/8" x 8" 6061 Aluminum (per ft) |
3 |
128790 |
M12-1.75 x 60mm DIN 931 Class 10.9 Yellow Zinc Finish Hex Cap Screw |
4 |
MW6420000YZ0000 |
M12 DIN 125 Steel Yellow Zinc Flat Washer, 13mm ID, 24mm OD, 2.5mm Thick |
6 |
15157 |
7/16"-14 x 1-1/4" Grade 8 Yellow Zinc Finish Hex Cap Screw |
4 |
8990 |
Hex bolts, Stainless steel 18-8, 3/8"-16 x 2-3/4" |
2 |
2949 |
Flat washers, Stainless steel 18-8, 3/8" |
2 |
2556 |
Hex lock nuts nylon insert, Stainless steel 18-8, 3/8"-16 |
2 |
|
Elite Engineering Catch Can (2010+ Camaro LS3 (SS), Black, Brass Barbs, OEM Rubber Fuel Line, Standard Bracket |
2 |
|
Stainless 1/4-20 x 3/4" Socket Button head bolts |
2 |
GAT 27002 |
1/4" Fuel Hose |
4 |
EDE 844240 |
1/8" NPT Male to 1/4" Barbed Brass Fitting |
1 |
MHC MP52F13 |
Fuel Injection Clamp, SAE Size# 4, Clamping Range: 7/16 - 1/2 Inch; 9mm Plated Band |
|
MHC MP52F15 |
Fuel Injection Clamp, SAE Size# 6, Clamping Range: 1/2 - 9/16 Inch, 9mm Plated Band |
|
|
1/4" NPT to 1/4" Barbed 90º Brass Fitting |
1 |
|
Stainless 1/4-20 x 3/4" Socket Button head bolts |
2 |
|
Flat washers, Stainless steel 18-8, 1/4" |
4 |
|
Hex lock nuts nylon insert, Stainless steel 18-8, 1/4"-20 |
2 |
|
Scrim 1/2" Sewing Pleating Quilting Foam Auto Home Upholstery G |
1 |
|
Scrim 1/4" Sewing Pleating Quilting Foam Auto Home Upholstery G |
1 |
SW12A |
Meziere 1/2" Rod End Safety Washers |
2 |
|
Brunton shifter relocation kit |
1 |