Remote hydraulics kit for a Kubota L3200 or L3800 tractor. This kit comes with all hardware and equipment to provide hydraulics allowing the use of skid loader attachments up front or supplying hydraulic power for rear attachments. It is a bolt on kit and can be installed quickly, and is adaptable to many Kubota models. The valve mount is universal and will need to be adapted to any models besides the L3200 or L3800. Please note- the hydraulic hoses and quick disconnects running to the front of the loader are not included due to the number of combinations and styles of fittings. The pictures of the couplers are for reference only. After the kit is installed, you will have 2 female SAE threaded ports ready for fittings or hoses. 1 single hydraulic circuit. The kit includes the valve, fittings, bracket, hose, and reference pictures for installation. I do not have actual directions but the kit is fairly self explanatory and I will email more pictures if necessary. Valve is electronically actuated with a momentary contact switch which is included. The switch clamps onto the loader control handle so it can be actuated while operating the loader with one hand. I had this kit developed for my tractor because Kubota did not offer this style of a remote hydraulics system at the time I purchased my tractor and I needed to be able to run my skid loader attachments with my tractor. I use my grapple bucket, rock hound, auger, seeder, and small generator with no problems. And beware, some of the other remote hydraulics kits I found for my tractor disable the loader function when the remote circuit is actuated. So when using the grapple bucket, the loader stops working when closing the claws, then starts working when grapple closes. This system does not do this. You get full loader operation when operating the remotes. This kit also allows the 3 point hitch to work when remotes are operating. Some rear remote kits disable the 3 point arms when the remotes are actuated. I have over 3800.00 in R & D for this kit. I needed to have full operation of the loader while running attachments, along with full 3 point operation. It works perfectly so I listed these to help recoup some of my development costs and offer a low cost solution to what Kubota should have already offered us Kubota owners. You will not be able to find a better kit at anywhere near this price. I am selling these for 45.00 more than what the fittings, valve, valve block, hose, and switch cost. Why put a skid steer loader quick attach plate on the front of a $20,000 tractor and not offer a fully functional auxillary hydraulics circuit? The kit will bolt up in 10 minutes if you are installing on an L3200 or L3800. I have personally adapted it to other tractors, but you will most likely need a different hose and bracket. Must have basic electrical wiring skills for installation. If you have never worked with wiring, you should not be installing this. Have someone else install the kit. Once the kit is ordered, it ships out in 4 business days. Thanks for looking.