BRAND NEW

1-11 TARGET

IDE

WITH CABLES.




LSK MEDIA Duplicator Controller for IDE drives, you can plug up to 11 IDE drives and copy CDs and DVDs.  NEW

FEATURES

1. COPY Copies the master CD/DVD. All contents of the master disc will be duplicated on to all target disc(s) simultaneously. 

2 TEST Simulates the copy process, but no data is recorded onto the blank disc(s). Note: Test mode can only be done with DVD-R and CD-R media only. 

3 COPY & VERIFY Copies the master CD/DVD, and then verifies the presence of data on the copied disc(s) to ensure readability on the copied disc(s). 

4 COPY & COMPARE Copies the master CD/DVD, and the immediately follows the copy process with a bit for bit compare process between the master CD/DVD and copied disc(s) to ensure exact duplication. Note: The “Compare” function cannot be used with audio CDs.
 
5 VERIFY Verifies the presence of data on the copied disc(s) to ensure that the copied disc(s) can be read back. 

6 COMPARE Performs a bit-for-bit comparison between the master disc and copied disc(s).
 
7 SET BURN SPEED Allows the speed settings to be changed for various formats. 

8 SELECT SOURCE Allows the source drive to be changed to any of the available drives in the duplicator, including the Hard Disk Drive (HDD). 

9 TRACK EDIT Allows for the selection of individual track(s) from different master audio CDs to create custom compilation. 

9.1 Copy Track Allows the selection of individual track(s) from the master CD and copies the selected track(s) on to all target discs. 

9.2. Close Disc Closes the target discs when all of the track(s) are burned on to all target discs. Note: The copied disc(s) will NOT play back without this step. Do NOT skip this step. 

9.3 Disc Info Displays the information regarding the track(s) on the disc(s) and how much space is remaining on the target disc(s). 

10 UTILITY 

10.1 Pre-scan Performs a scan on the master disc and ensures the master disc can be copied in the duplicator. 

10.2 Quick Erase Quick erase all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL). 

10.3 Full Erase Format all rewritable media (CD-RW and DVD+/-RW, DVD+/-RW DL). 

10.4 Eject All Disc Ejects all disc trays, including source drive. 

10.5 Disc Info. Displays basic information of the discs inserted, such as disc type, amount of data on disc for master disc(s) (in MB) and media book type. For blank media, displays the media book type, available space and speed of the media. 

10.6 Drive Info. Displays the duplicator’s drive information for the source reader, HDD (if present) and writer drive(s). 

10.7 System Info. Displays the duplicator’s controller information, such as the hardware version, buffer memory and currently loaded firmware. 

10.8 Update BIOS Updates the firmware for the controller. Note: Please make sure that the firmware is approved by the manufacturer and compatible with the duplicator before performing the update. 

10.9 Copy Count Counts the number of successful and failed copies made by the duplicator (for CD and DVD). 

11 SETUP 

11.1 Power On Time Sets system warm up time from 5 sec to 99 sec. Default is 15 seconds. 

11.2 Auto Start Sets auto start time from off (no auto start) to 99 sec. Allows the duplicator to automatically start one of six following functions once the master disc and desired number of blank disc(s) are inserted and the drive trays are closed: Copy, Test, Copy & Verify, Copy & Compare, Verify and Compare. 

11.3 Startup Menu Set a different command after the duplicator has been initialized. 

11.4 Display Mode Sets the amount of information displayed on the LCD when performing various functions.

11.5 Button Beep Enable or disable the audio feedback when buttons are pressed. 

11.6 Skip Read Error Enable the option to halt the duplication process if there is an error on the master disc. Disable to allow the process to continue with the same errors as the master disc. 

11.7 Eject on Start This function allows the duplicator to eject the disc tray(s) with disc present inside upon boot-up. 

11.8 Show Copy Time Enable or disable the copy time to be displayed when the copy process is finished. Also allows for the various other timed functions to display the completion time. 

11.9 Reader Speed Sets the speed at which discs are read during various processes. 

11.10 Compare Speed Sets the speed at which the compare process is executed. 

11.11 Change Bad Master Enables or disables changing of a master disc during the copy process when an error is detected on the master disc. 

11.12 CD Overburn Enables or disables the duplication of overburned CDs. 

11.13 Copy CD-TEXT Enables or disables the copying of the CD subcode (CD-TEXT) information for audio CDs. 

11.14 Show HDD Image Name Allows the image name to be displayed on the LCD screen when selecting the HDD as the source drive. 

11.15 Boot Password Set password protection for machine boot-up. 

11.16 Setup Password Set password protection for changing setup options. 

11.17 Language Allows different language selections for LCD display. 

11.18 Clear Setup Clears the CMOS and resets duplicator controller back to factory defaults. 

12 IMAGE MANAGER The HDD management for various functions of the hard disk drive (HDD). For this function & submenu to be present, a HDD must be installed in the duplicator. 

12.1 Select Image Select an image file as a source to be copied to the discs. 

12.2 Disc -> Image Load an image to the HDD from a master CD or DVD as an Image file. 7 

12.3 Set Reader Speed Set the Speed of data loading from the master CD/DVD to the HDD. 

12.4 Image Info. Displays the image file information such as image order, name, file size and type of image.

12.5 Rename Image Renames the HDD image partition’s name up to 8 characters. 

12.6 Delete Image Deletes an image file in HDD. Note: A file selected as the source file cannot be deleted until a different image is selected.

12.1. 

12.7 HDD Info. Displays the information in HDD, such as the number of discs stored on the HDD and the amount of space left in the HDD. 

12.8 Format HDD Formats the HDD, erasing ALL data stored on the HDD. 

12.9 Load & Copy Allows an image to be loaded onto the HDD from a master CD or DVD and automatically copied on to the target disc(s). Select from 3 modes: synchronous, load first and disabled. 

13 ADVANCED SETUP This function and submenu are for the advanced functions of the duplicator. 

13.1 Set Burn Loop Set the number of test loops performed for the Burn-In process. Use the scroll buttons to select loop count. 

13.2 Set Burn Time Set the time for the burn in process to be performed. Use the scroll buttons to select the desired time. 

13.3 Burn-In Performs the simulation of the testing process to verify the operability of the controller and/or drive(s). 

13.4 Display Mode Sets the amount of information to be displayed during the performance of various functions. 

13.5 Copy interrupt Allows for interruption of any function executed by holding down the ESC for five seconds during the performance of the function. 

13.6 Update Plextor Updates the drive firmware for Plextor-brand drive(s) using the controller. 

13.7 Update NEC Updates the drive firmware for NEC-brand drive(s) using the controller. 

13.8 Update BIOS Allows rollback or update of the firmware for the controller. 

13.9 Adv. Counter Tracks the total number of all CDs and/or DVDs duplicated by the controller