Welcome!   FINAL EBAY LISTING UNTIL HOLIDAY SEASON---PRICE REDUCED SO LOW, IT WOULD PAY TO TAKE A CHANCE!!!  Sorry, no guarantees at this price, which will not be reduced further.

If you're a local buyer, I'll make arrangements for a local pickup to save you the shipping cost. 

Offered is a 1987 model Jetstar pool, spa or pond pump.  (JETSTAR Swimming Pool, Spa Or Pond Pump 3/4 HP 7.5 Amp 120Volt 1.5" Pipe And A REAL WATER MOVER.)  I recently disconnected it from a medium sized water garden pond that had been unused for the past decade.  It was fully pond tested within the past several years, and worked fine.  From an era when things were built to last a lifetime.  Potent enough that it will power a large pond filter, falls and move a good amount of water throughout the pond.  The unit and large filter (not included or shown), were mounted inside a garage near the pond, and the entire works were professionally installed.  I believe this continuous run rated, thermally protected motor and pump are commercial grade.  I also removed three pieces of piping containing valves, junctions and a reducer.  These items will be shipped with this pump and closed cage filter.  Amazingly, this unit was installed about 6-7 feet above the top water level of the pond, and it still kicked butt!  SEE THE PHOTOS OF THE ATTACHED LABELS FOR MOTOR SPECIFICS.  I COULDN'T FIND THE G.P.M. RATING ANYWHERE.  I GAVE THIS ITEM A VERY CURSORY CLEANING ONLY, AS THE PHOTOS SHOW.  IF IT'S GOING TO BE USED TO POWER PONDWORKS, IT'S CLEAN ENOUGH.  IT IS LABELED AS A POOL OR SPA PUMP, BUT WITH THE IMMENSE (3 SQ. FEET) LAVA ROCK FILTER THAT WAS ATTACHED TO IT, THE WATER REACHING THE PUMP WAS QUITE CLEAN.  PVC sizes noted prior to disassembly were 1.5", 1.25" and 0.5" (to the large filter box).  See the photo with the bottle of HEET and a pair of vise grips next to the motor/filter for size comparison.  It is extremely heavy.  With the PVC piping included, the packed weight is around 33 pounds.  Filter will be removed from pump body prior to shipping.  Mfg. by Y.H.H. Electrical Industries, Inc.  Gaskets appear to be fine.  Screw and bolt ends are rusty.  Item sold as is, as pictured and described. Item motor was tested last month for a short time, and ran just fine.  NO guarantees at this price!!!

Thanks for stopping by, and good luck to you.  Have a great day!