HD/SD SDI Professional Digital Video BNC to BNC Custom made Cable any length
All my cables are custom made by myself using care, experience and the right tools.
Cable: Argosy Image 360 LSOH HD digital Video Cable
Equivalent specification: Belden 1855ENH, Bryant Precision SDI Video Cables (Small) or DRAKA HD-Pro 0.6/2.8 AF HDTV
Link: https://www.argosycable.com/Catalogue_/Argosy_Image_360_Cable/AA-05-001
Connectors: Coax BC 55C3G
With the higher requirements of Serial Digital Video, HDTV, 3G etc., we now offer "true" 75 Ohm BNC connectors, 3G-SDI compatible BNC connectors. To achieve a nominal impedence of 75 Ohm, these connectors are designed with a reduced dielectric around the pin.
Link:http://www.bryant-unlimited.co.uk/res/bc_55c3g_bnc_crimp_plug.pdf
Complete with a matching or contrasting rubber boot cable strain relief.
Cable features & spec from web:
These coaxial cables are suitable for the transmission of serial digital video signals and are equivalent to Belden 1855 and Draka Image 360. They offer an advantage over traditional types of cable used for this application, as their smaller diameter allows a larger packing density in signal distribution systems, e.g. in jackfield and distribution amplifier wiring, where back planes are very densely populated. The jacket material used is LS0H copolymer for compliance with today's increasingly stringent regulations for areas of public concourse.
Technical Specification |
Conductor | 0.605mm bare copper wire |
Dielectric | Gas-injected foam high density polyethylene |
Inner screen | Aluminium/polyester tape |
Outer screen | TCW 90% coverage |
Impedance | 75 Ohm |
Capacitance nominal | 54.0 pF per metre |
Dielectric constant: | 1.45 nom |
Velocity of propagation: | 81 - 84% |
Resistance: |
Inner conductor | 61.0 Ohms/Km |
Outer conductor (screen) | 17.0 Ohms/Km |
Jacket material | ‘LOW SMOKE’ halogen free copolymer |
Overall diameter | 4.50mm |
Max reel length | 500 metres |
Weight | 3.0Kg per 100m |
Attenuation @ | 1.0 MHz | 1.10 dB/100m |
| 71.5 MHz | 9.10 dB/100m |
| 88.5 MHz | 9.90 dB/100m |
| 135.0 MHz | 12.20 dB/100m |
| 180.0 MHz | 13.90 dB/100m |
| 270.0 MHz | 16.90 dB/100m |
| 750.0 MHz | 29.40 dB/100m |
| 1500.0 MHz | 42.20 dB/100m |
| 2250.0 MHz | 52.10 dB/100m |
| 3000.0 MHz | 60.30 dB/100m
|
If you require a custom length please buy the next length up and
post a note to me with the purchase.
EG: If you require a 25cm cable please buy the 50cm cable and
notify me of a custom cable length in the purchase message box
where you complete your purchase, or messgae me in the normal way
if you wish.
Note: I measure cable length from the back of the crimp ferrules
at each end(please see picture).
This cable, Argosy Image 360, has a minimum bend radius of 51mm,
thus using circa 160mm to make a 'U' bend.
That is not to say that you can not impose a tighter bend then 51mm
radius but if you do the cable will not deliver the stated
bandwidth.
The cable is stiff compared to lower performance / bandwidth cables.
Flexible high performance cables are available (please see my ebay
shop: http://stores.ebay.co.uk/d3videostudio ) but only in thicker,
heavier and more expensive forms.
- Custom made cables
- Any quantity
- Any length (over 300m of cable in stock)
- Just ask.
- All sales via eBay.