10/2014

13

2 + 26 

You are bidding on "Premier model" Bayonet style camera adapter to Telescope for Prime Focus or VARIABLE Projection Eyepiece Photography as shown in the pictures below.

     This is an exact picture of the adapter you are buying.  It is between the camera  an the telescope eyepiece holder; separate pictures shown below.  The eyepiece holder is a standard 1.25" telescope eyepiece holder. Camera and telescope not included.

 

     This is the actual adapter that you are purchasing. Why is this the Premier model.  The two screws in the center allow you to adjust the projection to your camera imaging sensor.  There are two slots which the screws ride in. You can see one of them at the center and lower portion of the picture.  So in affect you can chance the amount of the image being projected to the image sensor.

 

 

     This is the same piece as above with parts extended to the sides. From left to right (1,2,&3), the first part is the Bayonet mount which attaches to your camera and Variable projection eye piece.  The second part is the actual Variable projection eyepiece holder.  You slide your eyepiece from your telescope into the center and tighten it in place with the one screw to the right of center (see pictures below).  Part three is a T2 thread to 1.25 inch telescope mount. It slides into the telescope eyepiece holder.

 

     Another picture showing how the whole item assembles on your Nikon camera

 

Set up on your camera for Prime Focus.

 

 

     Assembled for Prime Focus using piece 1 and 3.

 

 

  Below are examples of placing the telescope eyepiece lens in place.  The part actually shown is my STANDARD projection eyepiece holder.  When used for eyepiece projection photography you place the actual telescope eyepiece inside the adapter.  A thumb screw is provided to stop the telescope eyepiece from moving around.

 

  Dropping in the eyepiece into your adapter

 

  Tightening the thumbscrew on side.

 

 You are currently buying a Nikon adapter so you don't need to make a choice.  The F mount is used on the Nikon D40, D40X, D60, D70, D90, D100, D200, D300 D3000, D3100 D5000, D5100 D7000 and other Nikon bayonet style mounts.  If you are unsure Email me. Below are other options for other bayonet mounts available for a variety of other cameras with bayonet style mounts.
 
  • Canon EOS to T2 Mount Adapter
  • Canon EOS EF-S to T2 Mount Adapter
  • Canon FD to T2 Mount Adapter
  • Nikon F to T2 Mount Adapter
  • Panasonic to T2 Mount Adapter
  • Minolta Maxxam to T2 Mount Adapter
  • Olympus, Panasonic Lumix, Micro 4/3 (four thirds MFT) to T2 Mount Adapter
  • Pentax PK to T2 Mount Adapter

 

 

 To view my other current auctions now  click here.

Nikon DSLR telescope VARIABLE Projection photography adapter

 Olympus Panasonic Micro 4/3 scope adapter Prime focus

Olympus Panasonic Micro 4/3 M43 telescope spotting scope adapter Prime focus

Pentax PK telescope Prime focus PROJECTION photography adapter spotting scope

 

prime focus eyepiece eye piece telescope camera adapter telescope adapter telescope eyepiece digital eyepiece