Carbon Fiber Mini 250 FPV Quadcopter Frame Specifications:
- Materials: 3k Weave Carbon Fiber
- Fasteners: Stainless Steel & Black Nylon 6/6
- Size: 220mm diagonally, 175mm wide, 130mm long motor-to-motor; about 1/2 the size of a regular quadcopter
- Maximum Propeller: 5"
- Motor Mount: M2 12mm - 16mm (Tiger MN1806 2300kv, RCX 1804 2400kv), M3 19mm (Tiger MT2206 2000kv, Sunnysky X2204 2300kv)
- Flight Controller Mount: 30.5mm x 30.5mm
- Board Camera Mount: 32mm x 32mm

RHD 2204 2300KV Brushless Motor Specification:
- KV: 2300
- Trust: 408g
- No. of cell: 2-3S
- Framework: 12N14P
- Propeller: 5" - 6"
- Length: 31.5mm
- Shaft: 3mm
- Diameter: 28mm
- Weight: 25g

Blheli 20A Mini ESC Specifications:
- Input: 2-4s Lipo （6-14.8V）
- Constant: 20 Amps
- Burst Current:25A up to 10S
- Weight: 8g
- Dimensions: 24x13x5mm
- Signal frequency: 20-499Hz
- Outout PWM frequency: 18KHz
- Application: Blheli firmware,14.2 Version
- BEC: None

5045 Bullnose CW&CCW Propeller Specification:
- Size: 5*4.5 inch
- Color: Black
- Material: Nylon + Glass fiber
- Weight: About 8g/1pair
- Mounting Hole: 5MM

CC3D Introduction:
OpenPilot is a next-generation Open Source UAV autopilot. It is a highly capable platform for multi-rotor craft, helicopters, as well as fixed wing aircraft. It has been designed from the ground up by a community of passionate developers from around the globe, with its core design principals being quality, safety, and ease of use. Simplicity does not come with any compromises either: with no hard-coded settings, a complete flight plan scripting language and other powerful features, OpenPilot is an extremely capable UAV autopilot platform.

Power distribution board Description:
- Item name: CC3D Distribution Board BEC 5V 12V LED Switch PCB
- Usage: QAV250 Vehicles & Remote Control Toys
- Input voltage: 2-6S
- Weight: 6g
 
Features:
- CC3D distribution board, with two BEC output 5V and 12V
- Holes and size are the same with CC3D flight control board
- With LED control Switch
 

FS-i6 Transmitter Specifications:
- Channels: 6 Channels
- Model Type: Glider/Heli/Airplane
- RF Range: 2.40-2.48GHz
- Bandwidth: 500KHz
- Band: 142
- RF Power: Less Than 20dBm
- 2.4ghz System: AFHDS 2A and AFHDS
- Code Type: GFSK
- Sensitivity: 1024
- Low Voltage Warning: less than 4.2V
- DSC Port: PS2;Output:PPM
- Charger Port: No
- ANT length: 26mm*2(dual antenna)
- Weight:392g
- Power: 6V 1.5AA*4
- Display mode: Transflective STN positive type, 128*64 dot matrix VA73*39mm,white backlight.
- Size: 174x89x190mm
- On-line update:yes

FS-iA6 Receiver Specifications:
- Channels: 6 Channels
- Model Type: Glider/Heli/Airplane
- RF Range: 2.40-2.48GHz
- Bandwidth: 500KHz
- Band: 142
- RF power:less than 20dBm
- RF.receiver sensitivity:-105dBm
- 2.4ghz System: AFHDS 2A
- Code Type: GFSK
- ANT length: 26mm
- Weight:6.4g
- Power:4.0-6.5V
- Size: 40.4x21.1x7.35mm
- i-BUS port: NO
- Data Acquisition port:NO

Package including :
- 1x C250mm Carbon Fiber Mini Frame kit
- 1x 5V 12V Power Distribution Board
- 1x CC3D Openpilot Open Source Flight Controller

- 1x FS-i6 2.4G 6ch transmitter& Receiver 
- 4x Blheli 20A ESC
- 4x RHD2204 2300KV CW&CCW Motor
- 2x 5045 Propeller CW&CCW (Black)
- 2x 5045 Propeller CW&CCW (Red)