Fenix RC40 new 2016 Upgrade with a massive 6,000 Lumens with 2 Year UK Warranty.

Fenix RC40 2016 is an ultra-high output 6000 lumen rechargeable flashlight designed for area / search purposes. Featuring six Cree XM-L2 U2 LED’s and a customized rechargeable battery, RC40 2016 delivers a shocking, balanced Rapid-Scan Beam able to illuminating an enormous space at short-mid distances and reaching out to 730 metres with out the necessity to modify focus. A USB output socket situated within the tail cap means the sunshine can even cost your USB units from an enormous inner battery capability of 15600mAh at three.7 volts.

The built-in 7.4v 7800 mAh rechargeable battery is supported by over-charge, over-discharge and over-heating safety and comes with an LED gasoline gauge situated within the tail of the sunshine. The gauge additionally operates while charging your USB units. A lifetime of over 500 cost cycles delivers cost-effective operation. Both mains and automotive chargers are included. Charge time: Mains – three.5 hours, Car – 5.5 hours

Fenix RC40 2016 options twin button operation with the left button controlling strobe and SOS while the proper button cycles 5 lighting ranges of 45, 500, 2000, 4000 and 6000 lumens making the sunshine extremely versatile within the area, with a selection of outputs / run occasions to fit your process. A lock out perform prevents unintentional operation.

Supplied with a top quality shoulder strap for snug carry within the area.

Fenix RC40 2016 efficiency:

Turbo: 6000 lumens (1 hour accrued time), High:4000 lumens (1h 50 min), Mid: 2000 lumens (4h 5 min), Low: 500 lumens (18h 15 min), Eco: 45 lumens (125h) Strobe: 6000 lumens, SOS: 500 lumens

RC40 2016 different options:

Over warmth safety with brightness step down at 65 levels Centigrade
Intelligent reminiscence circuit, remembers final used brightness degree
Waterproof to 2m depth for 30 minutes

For full product particulars, please discuss with the consumer guide within the pictures space.

Product provided with plastic insulators at each ends of battery to make sure the flashlight cannot be by chance activated throughout transit. Please take away earlier than use. Product won’t perform with insulators in place.

[su_expand more_text=”Support – Expant”]Support: Operation Instruction Master change: controls General mode and output choice. Auxiliary change: controls Flash mode and output choice. ON With the sunshine off, press and maintain the grasp change for zero.5 seconds to enter into General mode, press and maintain the auxiliary change for zero.5 seconds to enter into Strobe. OFF With the sunshine on, press and maintain the grasp or auxiliary change for zero.5 seconds to show off the sunshine. Mode Switching In General mode, click on the auxiliary change to enter into Strobe. In Flash mode, click on the grasp change to enter into General mode. Output Selection In General mode, click on the grasp change to cycle via Eco→Low→Mid→High→Turbo. In Flash mode, click on the auxiliary change to cycle by means of Strobe→SOS. Intelligent Memory Circuit The flashlight remembers the final brightness degree used within the General mode, the subsequent time it’s turned on, it is going to recall that beforehand used brightness degree. Lock-out Function Lock: Simultaneously press the 2 switches for three seconds (when the sunshine is unlocked), the sunshine will blink twice at Low after which exit. Unlock: Simultaneously press the 2 switches for three seconds (when the sunshine is locked), the sunshine can be unlocked and energy on the last-used output degree. Note: In locked state, the sunshine solely responds unlocking operation, press on any change, the sunshine will blink twice at Low to remind the sunshine is beneath locked state. Intelligent Over-heat Protection The mild will accumulate lots of warmth when it’s working at Turbo or High output ranges. When it’s detected at 65℃ or above, the sunshine will routinely and progressively decrease the output to stop overheating. The brightness will mechanically return to the traditional degree if the sunshine is detected under 65℃. Battery Level Indicator There are 4 LED indicator lights on the tail of the flashlight. Click the spherical tail change the indicator lights can be on for 3 seconds. The extra indicators are lit up, the extra battery energy will stay. Like this, 4 indicators illume indicating no less than 80% energy remaining, one illumes indicating greater than 20% remaining, and one flashes indicating 20% at most. Over-discharge Protection When the battery voltage is extraordinarily low, the sunshine will flip off routinely to guard the Li-ion battery from being broken. Low-voltage Downshift When the voltage degree drops under the preset degree, the flashlight is programmed to downshift to a decrease brightness degree till to the bottom output to remind you to recharge the flashlight. To guarantee regular use, the flashlight won’t flip off mechanically till Over-discharge Protection stops the battery from working. Charging and Discharging Charging: Plug the facility adapter into an electrical outlet and ensure the LED indicator on the facility adapter is strong yellow. Uncover the spherical charging port of the flashlight tail and join it to the facility adapter. Then the 4 blue indicator lights on the tail of the flashlight flash clockwise, indicating the charging course of has begun. All the 4 blue lights flip strong when charging is totally finished. The regular charging time is about three.5 hours. Discharging: Connect different gadget to the USB port of the flashlight. Then press and maintain the spherical tail change for one second, the 4 blue indicator lights begin to flash counterclockwise, indicating the discharging course of has begun. The max loading capability is 5V/1.5A. Note: Once charging is accomplished, remember to plug the anti-dust coated. Charge the sunshine when it’s off to allow full and quick recharging. When charging and discharging is concurrently detected, charging is previous to discharging. Please recharge a saved RC40 each 4 months to take care of optimum efficiency of the battery. Usage and Maintenance Disassembling the sealed head may cause injury to the sunshine and can void the guarantee. Long-term use may end up in O-ring put on. To keep a correct water seal, exchange the ring with an authorised spare. Periodic cleansing of the battery contacts improves the flashlight’s efficiency as soiled contacts might trigger the flashlight flicker, shine intermittently and even fail to light up for the next causes: Reason A: The battery lacks energy. Solution: Recharge the flashlight. Reason B: The threads, PCB board contact or different contacts are soiled. Solution: Clean the contact factors with a cotton swab soaked in rubbing alcohol. If the above strategies don’t work, please seek advice from the guarantee coverage earlier than contacting your approved distributor.[/su_expand]