Product SKUs
MBD-X8DTN+-O
  • X8DTN+ (Standard Retail Pack)
MBD-X8DTN+-B
  • X8DTN+ (Bulk Pack)
 
Physical Stats
Form Factor
  • Enhanced Extended ATX
Dimensions
  • 13.68" x 13" (34.7cm x 33cm)
 
Processor/Cache
CPU
  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon®Processor 5600 Series (Westmere)
    • Intel®
      Xeon®Processor 5500 Series (Nehalem-EP)
QPI
  • up to 6.4 GT/s
 
System Memory
Memory Capacity
  • 18x 240-pin DIMM slots
  • Supports up to 288GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
  • Memory Mirroring supported
Memory Type
  • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
  • 1GB, 2GB, 4GB , 8GB , 16GB
Memory Voltage
  • 1.5 V / 1.35V
Error Detection
  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
Note: This board does not support LRDIMM memory. Please refer to HERE for list of motherboards with LRDIMM support.
 
On-Board Devices
Chipset
  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D
SATA
  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support (Windows)
  • RAID 0, 1, 10 support (Linux)
IPMI
Network Controllers
  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
Graphics
  • ATI ES1000 controller with 32 MB of video memory
Super I/O
  • Winbond 83627HF chip
 
Input / Output
Serial ATA
  • 6 Serial ATA ports
  • 6 SATA hard drives supported
IDE
  • Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S) including CF(Compact Flash) Card
  • Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
  • 1 Floppy controller; 1.44 MB
LAN
  • 2 RJ45 LAN ports
USB
  • 2 USB rear ports
  • 2 USB on-board
  • 2 USB internal headers(3 ports)
  • 7 total USB ports, 2.0 Compliant
VGA
  • 1 VGA Port
Keyboard / Mouse
  • PS/2 keyboard and mouse ports
Serial Port / Header
  • 1 Fast UART 16550 serial port
  • 1 Fast UART 16550 serial header (opt)
Chassis ( Optimized for X8DTN+ )
2U Chassis
3U Chassis
Tower / 4U Rackmount
Important Chassis Notes
  • To support the new generation Intel® Xeon® processor-based motherboards, a Revision K chassis is recommended for most models. Please talk to your sales representative or follow the link for details.
 
Expansion Slots
PCI-Express
  • 2 (x8) PCI-E slots (1 in x16 slot)
  • 1 (x4) PCI-E slot (in x8 slot)
PCI-X
  • 1x 64-bit 133MHz PCI-X (3.3V) slots
  • 2x 64-bit 133/100MHz PCI-X (3.3V) slots
UIO
  • 1 UIO slot (PCI-E 2.0 x8 slot)
 
System BIOS
BIOS Type
  • 32Mb SPI Flash EEPROM with AMI® BIOS
BIOS Features
  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support
 
Management
Software
  • Optional IPMI (Intelligent Platform Management Interface) 2.0 / 1.5
  • SuperDoctor® III
Power Configurations
  • ACPI / ACPM Power Management
 
PC Health Monitoring
Voltage
  • Monitors for CPU Cores, +3.3V, +5V, +12V, +5V Standby, VBAT, HT Voltages.
  • 5-Phase-switching voltage regulator
FAN
  • Total of eight fan headers supporting up to 8 fans
  • Eight 4-pin fan headers
  • 8x fans with tachometer status monitoring
  • Support 3-pin fans (w/o speed control)
  • Low noise fan speed control (4-pin fan only)
Temperature
  • Monitoring for CPU and chassis environment
  • Thermal Control for 8x fan connectors
  • PECI
Other Features
  • Chassis intrusion detection
  • Chassis intrusion header
 
Operating Environment / Compliance
RoHS
RoHS 6/6
Environmental Spec.
  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)




Payment Policy

   Only PayPal is Accepted

              

 

Shipping Policy

  • Paypal Confirmed Addresses Only 
  • Items Will be Shipped by Fedex Ground on the Same or Next Business day of receiving full payment 
  • Fedex Tracking Number will be provided

Returns Policy

  • 1. Any physical damage products will not be accepted.

  • 2. Return shipping will be paid by Buyer.

  • 3. Up to 20% restocking fee will be charged for any accidental order made by buyer's remorse (Ex: buyer no longer needed the product or wrong purchase...etc.) within 14 days after delivery and it has to be in original condition.

  • 4. Free replacement for any defective return within the product's warranty period.

Guarantee

Cloud Project is dedicated to providing our customers with the  best service possible! Our goal is to be your first choice for great product selection, courteous customer service, secure transaction, and fast shipping. We will continue to dedicate our efforts to providing more value to our customers, streamlining the fulfillment process, and ultimately providng a completely satisfied computer hardware server solution to each of our customers. We are looking forward to having the opportunity to develop a long-term relationship with you!

About Us

Cloud Project is located in California, USA. During the past  several years, we have become well-established as a leading Server  integrator and one-stop PC component supplier. We have been providing  more than 125 national web hosting, network security companies and also  data centers from east coast to west coast with our customized  Supermicro and Tyan rackmount servers. With over 1000 products to select from, an in-house team of technicians, and superior customer service,  our efforts have been rewarded by our remarkable success in this rapidly evolving and intensively competitive industry.