The box contains:
Ceramic Armor Coat 40ml
Microfiber Cloths x 2
Footpads Coating x 8
Protective Gloves x 2
Application Instructions
After covering the body CERAMIC ARMOR COAT, your car:
CERAMIC ARMOR COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Surfaces, coated with CERAMIC ARMOR COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with CERAMIC ARMOR COAT™.
AREAS OF APPLICATION: Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.), with painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces. Coating is not suitable for chrome, painted plastic parts without lacquer. Freshly painted parts can be coated, but no earlier than after 2 months of painting. This product is applicable to all lacquered painted plastic surfaces.
APPLICATION INSTRUCTIONS (Read before starting the coating process):
Surface preparation
Prepare the surface properly prior coating. It is advised to fully wash the car, apply clay bar, polish with appropriate and required cutting compounds and machines, use silicon-removing cleaners, wash car again and dry the car until it’s fully dry. Ensure that there’s no risk of water dripping onto partly cured coating. It is recommended to use a strong air stream to blow any excess water from trim areas. If water does drip onto partially cured coating, we recommend re-polishing the affected area and reapplying the CERAMIC ARMOR COAT™. Surface, prepared for application, must be dry and free of any dirt, water and detergent residues.
Approx. consumption guide for cars:
Small automobiles (class A-B) 25-30 ml/car
Medium automobiles (class C-D) 30-35 ml/car
Large automobiles (class E, SUV) 35-40 ml/car
Technical charasteristics and data:
Product volume | 40 ml |
Areas of use | Automobiles, motorcycles, yachts |
Coating durability | 12 months / 50 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions; 36 months / 150 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions; |
Temperature resistance | up to 150 °C |
Chemical resistance | 12>Ph>1 |
Product efficiency | 4-5 ml/m2 |
Thickness of the coating | 700-1000 nm |
Scrach durability | 9H ("pencil test") |
Shelf life | 12 months |
Storage conditions | -3 °C to +30 °C, keep away from children |
Curing period | 6 hours after coating process surface must be protected from water, low temperatures and dirt; after 48 hours period coating fully cures and hardness test can be applied |
Highly effective acid-free special cleaner for all types of steel and light alloy wheels. Easily removes even the most stubborn dirt such as burnt-on brake dust, oil and rubber residue and other road dirt from all types of steel and alloy wheels matt-effect.
Sonax Full effect Wheel cleaner is possibly the best wheel cleaner available on the market today. Not only is it extremely effective but also extremely safe. It's PH neutral formula is safe on ALL wheels including aluminium, chrome and even polished rims. Sonax Full effect wheel cleaners thick formula clings to the wheel so is more economical and reacts directly with the iron particulates transforming them into a water soluble solution.
It's so effective often wheels don't even require brushing but if necessary all they will require is a soft bristled brush to agitate any remaining bits of dirt.
500ml Spray Bottle
Australia, New Zeland - from 2 weeks up to 45 working days.
North America, Canada - from 7 up to 31 working days (sometimes can be little bit longer).
South America - from 7 up to 31 working days (sometimes can be little bit longer).
Asia - from 7 up to 31 working days (sometimes can be little bit longer).
Europe - from 6 up to 11 working days (sometimes can be little bit longer).