Hi, Im selling my personal Akai MPC 5000, Its in great condition with minimal signs of wear. Light scratches on the screen but nothing crazy. In the photos you'll see streaks from wiping it down, those are not scratches. I take care of my equipment. Everything works great including the screen. Ive upgraded the pads with fat black pads and changed all the buttons except the record buttons to black. Also I had a local artist hand paint the side panels in red army fatigue. I will include the power cord.
Note: The SD Slot Chip blew out (the very small motherboard that the SD card slides into) and will need to be replaced if you choose to use it (price reduced). However you will not need it since you can directly connect to a laptop or PC to load new samples and export tracks. BUT if you would prefer to use it, you will be able to order a new one via MPCStuff.com.
Video of me showing that it works: https://www.youtube.com/watch?v=ChYT7h4Txuk
Returns ARE NOT accepted. The PRICE is firm!
-
General:
- Display: 240 x 128 dot graphic LCD w/back light
- Memory Card Slot: Compact Flash (The size of the compact flash card that MPC5000 can handle is from 32MB to 2GB)
- Dimensions (W x D x H): 18" x 16 1/16" x 3 3/8" (6 7/8" with screen at maximum height)
- Weight: 18.2 lbs
- Power Supply: Internal, auto switching, 110-240V, 50-60Hz
- Power Requirement: 50W
Sound Generator:
- Sampling rate: 44.1kHz
- Memory capacity: 64MB standard, expandable to 192MB
- Recording time: 12m 48sec. (64MB, MONO), 38m24sec. (192MB, MONO)
- Memory expansion slot: 1 x for optional EXM-E3
- Data format: 16-bit linear
- Polyphony: 64
- Dynamic filtering: 1 State Variable Filter per voice (up to 8 pole, depending on type)
- Filter types: LOW PASS, BAND PASS, HIGH PASS, BAND BOOST, BAND STOP, ANALOG MODELING, VOCAL FORMANT
- Preset sound memory: 16 MB
- Number of programs: 128
Effects:
- Effects: 4 stereo busses with 2 stereo effects per buss, and Master effect
- Master effect: 4 band EQ, Compressor
Sequencer:
- Maximum events: 100,000 notes
- Resolution: 960 parts per 1/4-note
- Sequences: 99
- Tracks per sequence: 64
- MIDI output channels: 64 (16 channels x 4 outputs)
- Song mode: 20 songs, 250 steps per song
- Drum pad: 16 (velocity and pressure sensitive)
- Drum pad banks: 4
- Sync mode: MIDI clock, MIDI Time Code
- Transport Controls: MIDI Machine Control
Inputs/Outputs:
- Record input (L and R): MIC/ 1/4-inch Combo x 2 balanced -40dBu, input impedance 11k ohms; RCA with PHONO preamp,
- Max. Input level: +10dBu
- Digital RCA-pin x 1 S/PDIF
- Stereo output (L and R): 1/4-inch phone x 2 balanced +11dBu, output impedance 1k Ohms,
- Max. output level: +22dBu
- 8 individual outputs: 1/4-inch phone x 8 balanced +11dBu, output impedance 1k Ohms,
- Max. output level: +22dBu
- Phones output: 1/4-inch stereo phone x 1, 200mW / 100 ohms
- Digital output: RCA-pin x 1 S/PDIF
- ADAT Optical: x 1 (8 Channels)
- MIDI inputs: 5-pin DIN x 2
- MIDI outputs: 5-pin DIN x 4
- USB: connector x 1, USB MASS STORAGE CLASS support
- (Windows 2000/Me/XP or later version, or Mac OS 9.x/10.x or later version. )
- Footswitches: 1/4-inch x 2
- Standard accessories: Power cable, Operator's manual
Data Compatibility
- MPC1000: SEQ, WAV, PGM
- MPC2000/2000XL: SEQ, WAV, SND, PGM (Most parameters of PGM file can be loaded.)
- MPC4000: SEQ, WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
- MPC3000: SND (THRU Computer)
- Z4/Z8: SEQ, WAV, PGM (DRUM program only. Only note assign and tune are loaded.)
- S5000/6000: WAV only (THRU Computer)
- S1000/3000: No compatibility