36v 500W mid drive 8fun electric bike complete conversion kits.
Packing list:
1. BBS02 + Mid-Drive Motor: 1 pc
2. LCD Display + Operation Button: 1 pc
3. Brake Levers: 2 pcs
4. Thumb Throttle: 1 pc
5. Waterproof Quick Release Wires: 1 pc
6. Speed Detecting Sensor + Magnet: 1 pc
7. Chain wheel + Chain Cover: 1 pc
8. Left Crank + Right Crank: each 1 pc
9. Fixing Plate: 1 pc
10. M5*10 Nuts: 5 pcs
11. M6*12 Nuts: 2 pcs
12. M33 Nuts: 2 pcs
13. ST 3.9 Nuts: 5 pcs
Specification:
1. Voltage: 36v
2. Power: 500 w
3. Motor Weight: 4.2kgs
4. BB Length: 68mm (Suitable for 68mm length BB Bike Modification)
5. Working Temperature of Dsplay: - 20℃- 80℃.
6. Waterproof Grade: IP65
Voltage
4
Current Limit
25A
Motor Weight
4.2kgs
Installation:
1. Open the package and take out drive unit accessories; And check the specification whether it is correct.
2. Fix the chain wheel on drive unit with 5pcs screw M5*10, then fix chain cover on chain wheel with 5pcs screws ST3.9.
3. Fix the drive unit axle tube on frame bottom bracket.
4. The surface with teeth of fixing plate towards inside, then fix the plate on drive unit with 2pcs M6*10.
5. Hold the drive unit near to bicycle fork, force less than 5kgs, tight 1st nut M33 onto axle tube with force : 30-40N.m.
6. Fix 2nd nut M33 onto axle tube, tightening force: 30-40N.m.
7. Fix the left crank on the bike with M8 inner hexagon screw. Tightening force: 35-40N.m.
8. Fix the right crank on the bike with M8 inner hexagon screw. Tightening force: 35-40N.m.
9. Connect all cables for battery, display, speed detecting sensor and so on.
Which bike can use this motor kits?
1. Bottom Bracket Width shall be 68mm
2. Suitable for 24-26" Mountain Bike or 16-20" Folding Bike
3. Your bike shall have the down tube to fix motor, down tube are connected with BB
---------///////////-----------//////////---------------//////
MID drives are the holy grail power-providers for electric bikes.
If you want to know how you can spend a little of money on an electric bike
and get the ultimate in efficiency and performance this is a good start.
MID drives are the cream of the crop once you are out riding, especially off road, especially climbing hills or even mountains.
2014 Newest Bafang 8fun BBS01 Motor Kits
Here Are The Newest Version Of The "Holy Grail" Of E-Bike Conversion Kits The Bafang 8fun Mid Motor/Crank
BBS01 36 volt 18Amp 500Watt Mid Motor.
Convert any bike that has 68mm(2.68") - 73mm(2.87) wide Bottom Bracket. Which is Most Bikes.
This Motor will achieve a lower center of gravity,higher torque,higher efficiency namely using the motor after installation it's part of the frame and not the wheels. Using the bikes gearing and the motors gearing this unit runs very quietly and efficient resulting in less battery power consumption.
The LCD Display is the Newest Bafang C961 Using Bafangs Software Protocol V4.0 The Display allows you to program 9 levels of assist, walking assist mode, Battery Power
Level,Speed(Speed/Max/Avg),Distance (Trip/Total), Time, Backlight, Error Code.
You also have a thumb throttle overide mode.
The motor controller is built inside the motor(less stuff hanging around out on the frame). This Motor Also Has Overheat Cutoff Control To Protect Motor From Damage.
Long term maintenance value is very economical (ease of tire change).. This motor can achieve up to 648 watts peak output! 36 volts x 18 amps = 648 watts! With Battery of at 36v 10ah .
Come with:
.
Your browser does not support JavaScript. To view this page, enable JavaScript if it is disabled or upgrade your browser.