NANO SHINE COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Surfaces, coated with NANO SHINE COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with NANO SHINE COAT™.

APPLICATION

1. Prepare the surface properly prior coating. It is advised to fully wash the car, apply clay bar, polish with appropriate and required cutting compounds and machines, use silicon-removing cleaners, wash car again and dry the car until it’s fully dry
2. Ensure that there’s no risk of water dripping onto partly cured coating. It is recommended to use a strong air stream to blow any excess water from trim areas
3. If water does drip onto partially cured coating, we recommend re-polishing the affected area and reapplying the NANO SHINE COAT™
4. Surface, prepared for application, must be dry and free of any dirt, water and detergent residues.

AREAS OF APPLICATION: :

• Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.)
• Painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces
• Coating is not suitable for chrome, painted plastic parts without lacquer
• Freshly painted parts can be coated, but no earlier than after 4 weeks of painting
• This product is applicable to all lacquered painted plastic surfaces.

Product is recommended as upper layer for CERAMIC ARMOR COAT to achieve best results possible.

Approx. consumption guide for cars:

• Small automobiles (class A-B)                  20-30 ml/car
• Medium automobiles (class C-D)           30-40 ml/car
• Large automobiles (class E, SUV)             40-50 ml/car

TECHNICAL CHARACTERISTICS AND DATA

Product volume: 50 ml
Areas of use: Automobiles, motorcycles, yachts
Coating durability:   12 months / 40 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions; 18-24 months / 60 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions
Temperature resistance:  up to 150 °C
Chemical resistance:  12>Ph>1
Product efficiency: 5-9 ml/m2
Thickness of the coating:  400-600 nm
Scrach durability:  9H ("pencil test")
Shelf life:  12 months
Storage conditions:   -3 °C to +30 °C, keep away from children
Curing period:  6 hours after coating process surface must be protected from water, low temperatures and dirt; after 24 hours period coating fully cures and hardness test can be applied

The special nano coating, developed and adapted to harsh climatic conditions.

This product is designed according to the severe weather and road salts used in blends, creates excellent protection, pasirūpinančią car body longevity. The special formula allows the surface to create a strong and dense protective layer that protects not only from the salt, but also from bird droppings, acid rain and UV rays.

Surfaces coated with this tool, it is easily cleaned and maintained, and requires less effort and time.

After covering the body CERAMIC ARMOR COAT, your car:

• Longer remain clean;
• Will become more resistant to scratches;
• Will take a long-term protection against UV, acids, alkalis, salts;
• Will gain a healthy, deep gloss lacquer;

After covering the body CERAMIC ARMOR COAT, your car:

• Product volume of 40 ml
• Application Area Cars, motorcycles, boats effectiveness
• 12 months. / 50 washes in severely (-40 ° C to 40 ° C, pH> 12) conditions;
• 36 months. / 150 washes in normal (20 ° C to 35 ° C; pH> 12) conditions;
• Temperature resistance up to 150 ° C
• Chemical resistance 12> Ph> 1
• Yield of 4-5 ml / m2
• Nano coating thickness of 700-1000 nm
• Resistance to abrasion 9H pencil test
• Product validity 1 year after opening
• Storage conditions -3 ° C to +30 ° C, the reach of children
• Covering the period of formation 6 hours. The surface must be inviolable and protected from dirt, rain;
• 48 hours after fully coating hardens and acquires resistance to the environment

NANO SHINE COAT™ is an ultimate paint protection system against all negative environmental effects. Its unique technology helps achieve a thick coating, which protects Your car from bird droppings, acid rains, UV lights. Surfaces, coated with NANO SHINE COAT™ will also inherit highly hydrophobic surface properties, which will enable You to clean Your car easily and with less time and energy. Your car will stay more clean and shiny when coated with NANO SHINE COAT™.

AREAS OF APPLICATION: :

• Cars, boats and any other type of transport vehicles (Trains, aircraft, motorcycles etc.)
• Painted surfaces, lacquered body and lights (headlights, taillights, fog lights etc.), black plastic trim surfaces
• Coating is not suitable for chrome, painted plastic parts without lacquer
• Freshly painted parts can be coated, but no earlier than after 4 weeks of painting
• This product is applicable to all lacquered painted plastic surfaces.

Product is recommended as upper layer for CERAMIC ARMOR COAT to achieve best results possible.

Approx. consumption guide for cars:

• Small automobiles (class A-B)                  20-30 ml/car
• Medium automobiles (class C-D)           30-40 ml/car
• Large automobiles (class E, SUV)             40-50 ml/car

TECHNICAL CHARACTERISTICS AND DATA

Product volume: 50 ml
Areas of use: Automobiles, motorcycles, yachts
Coating durability:   12 months / 40 carwashes (-40 °C to +40 °C; ph > 12) during harsh conditions; 18-24 months / 60 carwashes (-20 °C to +35 °C; ph < 12) during normal conditions
Temperature resistance:  up to 150 °C
Chemical resistance:  12>Ph>1
Product efficiency: 5-9 ml/m2
Thickness of the coating:  400-600 nm
Scrach durability:  9H ("pencil test")
Shelf life:  12 months
Storage conditions:   -3 °C to +30 °C, keep away from children
Curing period:  6 hours after coating process surface must be protected from water, low temperatures and dirt; after 24 hours period coating fully cures and hardness test can be applied

AntiFog coating for car windows is advanced product that provides protection against fogging on glass surfaces while reducing uncontrolled water condensation on windows. The product is ideally suited for the inner surface of car windows and mirrors. AntiFog also has anti-static anti-dust properties while product does not contain solvents harmful to man and is safe for the environment.

Application:
car windows and mirrors, home windows and mirrors, etc.

Coating durability:
Up to 4-6 weeks.

Efficiency:
10-15 ml/m².

Available sizes:
100ml/250ml

NOTE:
The product should be used in accordance with the attached instructions. The coating is not resistable to cleaners or wipers. Anti-fog effect might last for up to 6 months if the coated surface is untouched (cleaning or touching the coated surface removes the nano particles).

We present You a long lasting hydrophobic coating for shoes. This product is very easy to use and has a long-lasting shield, protecting Your shoes from dirt, mud and salts during winter seasons.

HYDROPHOBIC NANO COATING FOR SHOES is made of alkoxysilane nanoparticles mixed with water, which penetrate into the structure and protect the coated fiber material against the rain, dirt, snow or even salts!

Efficiency: one bottle can coat 8-10 pairs classic leather shoes for men, 2 pairs of suede, nubuck leather medium heel shoes, 1 pair of knee high suede, nubuck leather shoes etc.

NOTE: If You're coating an used shoe, firstly thoroughly clean the shoe's surface and only then coat the surface with this product. This coating is not suitable for laquered leather shoes or shoes coated with wax, silicone products.

Greasy stains, dried or wet dirt, mud, dog tracks, the juice spilled by the children. It is a daily hazard for Your upholstery. You can effectively protect Your car interior with   LEATHER NANO COATING.

Application:
seats, seat leather, leather shoes...

Durability:
Up to 2 years.

Efficiency:100-200 ml/m2.         Available capacities:100ml/250ml

HYDROPHOBIC NANOCOATING FOR TEXTILES is a new solution for permanent impregnation of textile materials, leather and suede. HYDROPHOBIC NANOCOATING FOR TEXTIELES protects coats, boots, pants, dresses, jackets or T-shirts before soaking in rain water, and the spots arising as a result of spills such as white wine, juice or oily stains, while not changing the properties of the material. Product penetrates fibers into nano-meter scale, and protects from the formation hard to remove stains while being friendly to human health. Protects the coated fiber against the rain, dirt, coffee, juices, soft drinks, or even ketchup!

Application available on: Leather jackets, down jackets, suits, cotton shirts, ties, T-shirts, shoes.

1. Shake the container before use.
2. Spray evenly on the dry and clean material.
3. Using plastic gloves allocate the coating evenly on the material.
4. Leave and wait until the surface is dry.
5. The hydrophobic effect of nanocoating can be checked by pouring water on the treated material.

NOTE:
The product should be used accordance with the attached instructions. In the case of weakening effect, the coating should be reapplied in some places. Keep out from the reach of children! Do not store directly in sunlight or frost.

Application conditions:
The product should be applied at the temperatures above +5 0C and dry weather conditions.

Efficiency:
50-100 ml/m

Durability:
up to 2 years (Depending on the intensity of use). Product is not designed to withstand washing with dergents.

Storage:
Store at the temperatures between +5 0C to +250C.

NanoWiper will improve visibility in the rain and will help to drive

without using the wipers! NANO WIPER elevates the glass in the

nanometer scale. Silanes nano particles bonds to the surface of the glass,

giving it the properties of hydrophobic and oleo-proofing effect.

Application:
Car windows, motorcycle fairings.

Durability:
9 - 12 months or 20.000 km (depending on the physico-chemical conditions affecting the surface of the glass).

Available containers: 100 ml  Efficiency:8 - 12 ml/m

NANOTEC Stay-Clean for Glass and Ceramic is a nanotechnological product carefully design to protect the treated surfaces against dirt (Shower cabins and etc.). The product creates permanent nano-coating that protects surfaces such as glass, ceramic tiles from the sediments, lime, and other hard to clean dirt. With NANOTEC Stay-Clean formula, the surface care does require any aggressive detergents. In order to maintain hygiene and sanitation of the shower cabinet, simply wiping with dry or damp cloth is needed.

Coating durability:2-3 years        Volume:100 ml

NANORIM is a coating material on basis of the chemical nanotechnology and achieves an excellent stay-clean and easy-to-clean properties that provides simple removal of dirt from car and motorbike rims, also significantly reducing the adherence of skid dust.

Application:
Suitable for all kinds of rim.

Durability: about 1 year.      Efficiency: approx. 5-10 ml per rim.

Very useful produt for car owners, providing hydrophobic effect for vinyl, tent-cloth roofs that gives permanent protection against water, dirt, salts etc. This product  provides the waterproofing coating designed to protect convertible car roof. The product impregnates the surface with silane nano particles, thus preventing from penetration of dirt and pollutants into the interior. The material is resistant to water and substantially reduces the possibility of stains.  Repulsion of liquid through the hydrophobic effect on the covered material, facilitates the removal of spilled liquid from the impregnated surface and makes it difficult for stains to appear. The coating produces thin invisible layer around fibers, while not changing the material (the feel, look and degree of "breathing" stays the same). Nano coating is resistant to condensation water, salt solutions, acid rain and dry cleaning. This product contains no harmful solvents for humans, is based on water and is safe for the environment.

Volume:
250 ml

NANOAUTO COCKPIT CLEANER is nanotechnology-based cleaner designed for cleaning plastics. This product perfectly removes contamination from smooth and porous surfaces, as well as, protects the surfaces from the development of bacteria for a long time.

NANOAUTO COCKPIT CLEANER impedes the deposition of dust and allows maintaining surfaces clean for a longer time. It leaves no cleaning marks or stains and perfectly removes finger marks from plastic surfaces. Moreover, the product is recommended for allergy sufferers.

Available quantity:
250 ml

NANOTEC Shoes Deodorant. NANOTEC is a bacteriostatic specimen made to protect the inside of shoes from unpleasant odors, bacteria and fungi. The product effectively protects footwear against the formation of unlikable and undesired odors over a long period of time.

Volume:

250 ml

Spray Nanotec Paint on surface and wipe it with MicroFiber towel. Wait until the surface gets dry. Do not dilute.

Keep container well closed. Keep out of reach of children. Use in a well ventilated area.

Nano Coating Waterproof for Metal Chrome Stainless Steel Shower
When coated, cleaning of the surface does not require detergents to be used, damp cloth is all You need.
Durability of the nano-coating lasts: up to 3 years.

Available containers: 100 ml
AEfficiency: 8-10 ml/m2