The box contains:
The special nano coating, developed and adapted to harsh climatic conditions.
This product is designed according to the severe weather and road salts used in blends, creates excellent protection, pasirūpinančią car body longevity. The special formula allows the surface to create a strong and dense protective layer that protects not only from the salt, but also from bird droppings, acid rain and UV rays.
Surfaces coated with this tool, it is easily cleaned and maintained, and requires less effort and time.
CERAMIC ARMOR COAT is a very strong paint protection from adverse environmental effects. The unique technology creates a strong protective layer that protects your vehicle from acid, alkali, salt, rain, dust and ultraviolet rays. Surfaces cover CERAMIC ARMOR COAT also acquires a strong hydrophobic properties that allow the car surface easier to maintain, wash and clean. Car covered with this arrangement, longer remain clean and shiny.
Application areas: Cars, boats, motorcycles and other vehicles (trains, planes, sailboards, etc.), any painted and varnished surfaces (car headlights, etc.), Plastic trim components (except for metal, glass surface). This tool is not suitable for chrome-plated, painted unvarnished detail covered. Newly painted surfaces can be covered with at least 2 months after painting. The product is also suitable for all types of color-treated lacquered plastic surface applications.
OPERATING INSTRUCTIONS(Read the entire guide before applying the surface):
Before application of this measure a car, the surface should be properly prepared. Recommended preparation:
Thoroughly wash the car, remove the loose dirt with a special body dedicated eraser, polish the body with a proper means, degrease the surface with a silicone remover for cleaner, re-wash and dry the car until it is completely dry. Make sure that the gap or trim detail left the water, which could fall on the surface during application (we recommend with a strong stream of air to inflate all the water out of the car decorations and so on.) If the coatings on the coated surface of the water to fall, we recommend re-polished in a wet place, and once again cover CERAMIC ARMOR COAT.
Make sure the surface is not hot and not fall on it in direct sunlight. During application, the temperature must be between +5 to +25 ° C. Application Wear rubber gloves in the kit. Before opening the bottle, gently shake its contents and open the door. Dab a swab from the action 4-5 different places: Place the swab to the bottle neck openings and a short turn over upside down, as shown on our website in the video instructions. Swab horizontal and vertical movements rub the area you want to cover - make sure that the places left bare. One of the swabs must cover about 1 m2
This should last about 75 seconds. Cover an area pad, immediately wipe the surface with a microfiber cloth and wipe again the second microfiber cloth until the surface is completely dry and smooth. You can use both sides of the cloths.
Warning: Do not leave not wipe away surface, because the nano coating hardens by reacting with air, so it is necessary to measure the excess drain with a microfiber cloth. If measures are not to wipe away the rags and harden it may remain visible circles and spots. They can be removed to the 2000 level of grain sandpaper or sanding tool.
If the coating temperature is higher than 25 ° C and the humidity in the air ratio exceeds 50%, apply no larger than 50 x 50 cm of space and polish with a microfiber cloth at a time.
Cover the entire desired surface, this has 24 hours to be protected from contact with water, mud, chemicals and friction. The coating is fully formed and acquires hardness 48 hours after application. Microfiber cloths used in coating, should not be used to re-lacquered, glossy plastic surfaces.
We recommend that you carefully before applying car view our website contains a video guide to avoid possible errors.
Yield:
The box contains:
Features and benefits:
NANOWIPER nano coating for glass coating nano level. 4 nanometers in nano-sized group of silanes components during application adheres to the glass surface, so giving a glass hydrophobic and oleofobic properties.
Cover glass improves visibility when driving in the rain, while driving faster than 70km / h speed wipers no longer needed. NANOWIPER nano coating to enhance visibility in 34%, 25% improves the driver's reaction time, 70% reduction in the accumulation of soiling, 60% decrease in expenses glass cleaner. Glass surface is much easier to clean: summer insects are easy to clean, very easily cleaned with a winter frost.
Surfaces coated with this tool, it is easily cleaned and maintained, and requires less effort and time.
Preparation of coating:
Coatings are advised to wear gloves because of the presence these in draining materials. The surface prior to application of coatings and must be thoroughly cleaned, dry, grease or otherwise you free from contamination.
Directions for use:
Shipping prices to United States, Canada, Australia, Asia, Norway, Russia, Belarus, Switzerland - Free Shipping (registered shipment - priority with tracking number)
Shipping prices to European union countries - Free Shipping (registered shipment - priority with tracking number)
Tracking number will be provided.
Shipping times:
We accept payment by paypal only.
We will leave Positive Feedback after receive the payment, Please do not forget to give us and FIVE STARS on all of the Detailed Seller Ratings.
If you are not satisfied with your shopping Experience, Please contact us to get a solution before you decide to leave a neutral or negative feedback, We will try our best to solve any problems for you as soon as possible, thanks. We will provide you service as best as we can, cause the feedback and is what we are striving for. Please email me through "My Messages" or "Ask Seller Questions" if you have any question about our listings or your purchase.