All of my welding rod is made in the United States.
1 PACK OF FLUXLESS ALUMINUM REPAIR ROD.
There are three videos, click one time on youtube arrow to watch one.
When you finish watching that one, click on the other.
Check out my other items
Be sure to add me to your favorites list!
The skeg pictured below was rebuilt by using my
Special Alloy Rod.
I repaired the above pictured boat out in the woods and a cool
breeze of about 5 miles per hour was blowing.
The below pictured compressor was leaking so much
that it was useless. I welded it with my Special Alloy
Rod and I have been using it about 3 years since, with
no leaks.
____________________________________________________________________________________________________________
Feedback from satisfied user:
I am a Boilermaker by trade and this rods is excellent Thank for the 26 rods!AAA
The below came from a satisfied user.
Note: hey charles, i bought a package of 25 rods from you last week, and am so impressed i am splitting an order
with a friend. can you ship the rod in 2 or 4 containers, so we can easily split up and store the rod? by the way it
works great! i'm an amateur and i just fixed an irrigation pipe in the field, no problem. thanks!
___________________________________________________________________________________________________________________
The below email was received from a gentleman in Canada.
**********************************************************************************************************************
Helo from Canada Charles,
Just a short note to praise your aluminum welding rods. We own and operate
a fishing resort in Ontario Canada. From our resort we have boats on 12
lakes. When the season ends we turn the boats over and take the out boards
back to our main lodge. After many years of chatting at the Dallas Boat
Show you sold me a tube of your product. In June of that year we had a
flood. My boat on one of our portage lakes broke loose and when I found it,
it was rubbing on a rock. End result was a hole about 1 inch long and 1/8
inch wide. My solution was me and 2 other fellas to drag a 16 fot Lund 1
mile through the woods, tow the boat 25 miles to town and pay to get it
reapired. The alternative was to walk the 1 mile into Ash Lake with a few
of your rods and a propane torch. Voilla!! All is well. This testimonial
can be verified at 1-807-274-4046 or at the Dallas Winter Boat Show in booth
311. Thanks Big Guy. You saved me a lot of work and $$$$. Those rods will
always be close.
Glen Treflin, Northern Lite Camp, Fort Frances, Ontario, Canada. Fishing at
it's best! 1-800-348-3474
PS: I also have a sucess story of fixing an aluminum boat that was turned
over for the winter and had a hole punched through it by a snow machine ski.
More deatails available.
*********************************************************************************************************************
The torch you see me using in above picture works very well. This is a 5000 bernzomatic. Purchase in any hardware store.
You will receive full, easy to understand instruction with the pack of rod.
Satisfaction is guaranteed or your or your purchase price will be cordially refunded upon return of the unused portion of the merchandise.
In the early fifties, I started fooling around with trying to weld aluminum with a torch. I had no idea how hard it was, til I tried.
I burned up a lot of aluminum.
I finally learned how to repair aluminum with a torch, with great difficulty and I sometimes burned my aluminum up even
when I thought I knew what I was doing.
No more burning up your aluminum.
All of our
"SPECIAL ALLOY ROD"
is made in America.
We have developed a rod that makes it so easy to repair aluminum with any kind of torch, that even
an amateur can look good even on the very first try.
This newly developed rod repairs cast aluminum, die cast, extruded, sheet aluminum, pot metal. Aluminum from Japan, Russia, England, France, Fiji Islands, United States or where ever.
This rod repairs aluminum that was made yesterday, or aluminum that was made in the year l888. It is non-discriminatory.
It is compatible with all aluminum alloy.
This new rod will repair any metal that a magnet will not attract.
It is actually true, you can be a success on the very first try.
We have developed a rod that makes it easy for even the first timer to be a success.
A propane torch puts out 2600 degrees farenheit. Aluminum melts at 1200 degrees farenheit.
A propane torch puts out over twice the heat needed to melt aluminum.
So, we have never had a problem with having enough heat.
We used to have a rod problem. Now we have solved the rod problem.
NO FLUX NEEDED.
NO SPECIAL TOOLS NEEDED.
NO EXPERIENCE NEEDED.
Just clean your aluminum down to bare metal. Use a file, grinder, sand paper, sandblast or brush it off. Just do not
use any chemicals.
Heat the aluminum. Use your rod for a test stick. When your rod starts to melt, you know you have the aluminum
workpiece hot enough to repair.
I will guarantee you that you will not burn your aluminum. You will be a success on your very first try.
We have developed many rod over the years. We have built thousands and thousands of rods in Arkansas,
Florida and Texas.
Promotion and sales are taking up all of my time now, so we are having friends build it for us, but it is to
specification.
Our rod has the same satisfaction guarantee that we have always had.
You may have seen me demonstrate this rod.
I have demonstrated this rod over much of the United States in the last several years.
You may have seen me at boat shows, car shows, RV shows, antique car shows, tractor shows, and steam shows,
in many different states.
I also distribute my rod out to other demonstrators, and you will see some of them out at various shows over the country.
I have 100's of written testimonials as to the success inexperienced people have had with this aluminum repair rod.
T.D.B. says "Repaired boat prop easily in minutes."
I do business with many boat dealers and one of the boat dealers employee said he repaired a junk boat with my
Special Alloy Rod and here is what he said - " I had a Monark. Filled it up with water and found 32 holes. I use
the rods to weld up my holes and now I have not 1 leak."
Bert S. says "Patched a crack in lawn mower crank case - It works!"
Steve B. says "I have used this rod to repair racing heads on dirt track cars and this is absolutely amazing how easy
& well it works."
One gentlemen says "Repaired barrel sleeve on Beretta 22 target pistol with aluminum repair rod."
Aluminum Repair Rod will even repair "pot metal."
Many welders will tell you that it is impossible to repair pot metal.
Mr. E. R. says "I welded a 55 T Bird horn ring. Have showed car may times with no problem."
THE ABOVE HORN RING WAS MADE OF POT METAL.
The jeep door hinge you see in the below picture is pot metal.
The wind blew the door open and the hinge broke completely off.
I welded it with ease with my Special Alloy Rod and it is one piece of metal now. The hinge is now
stronger than it was when it came from the factory.
The electrical conduit fittings you see below are some of the sorriest pot metal ever made. I took
two new ones, cut the ends off and welded them together. They are one piece of metal now.
I repaired a compressor head with this rod.
The threads were stripped out.
The compressor was completely useless and a new head was not available.
The compressor does not leak and it has been going for over 2 years after the repair. Picture of
compressor below.
I repaired a tripod with this rod. PICTURES BELOW. This tripod is actually welded. It is not just
stuck together. It is all one piece of metal now. 
The top of the tripod that I welded on is pot metal and it is stronger now than when new.
The skeg on the boat motor was repaired with a propane torch and my SPECIAL ALLOY ROD.
The head shown below was repaired with a propane torch and my SPECIAL ALLOY ROD.
All of our
"SPECIAL ALLOY ROD"
is made in America.
We have developed a rod that makes it so easy to repair aluminum with any kind of torch, that even
an amateur can look good even on the very first try.
This newly developed rod repairs cast aluminum, die cast, extruded, sheet aluminum, pot metal. Aluminum from Japan, Russia, England, France, Fiji Islands, United States or where ever.
This rod repairs aluminum that was made yesterday, or aluminum that was made in the year l888. It is non-discriminatory.
It is compatible with all aluminum alloy.
This new rod will repair any metal that a magnet will not attract.
It is actually true, you can be a success on the very first try.
We have developed a rod that makes it easy for even the first timer to be a success.
A propane torch puts out 2600 degrees farenheit. Aluminum melts at 1200 degrees farenheit.
A propane torch puts out over twice the heat needed to melt aluminum.
So, we have never had a problem with having enough heat.
We used to have a rod problem. Now we have solved the rod problem.
Mr. W.H. says "I repaired 1976 Harley motorcycle. Outside case cover had a crack and hole. Filled the crack and hole,
then polished. Works perfectly."
Mr. K.F. says "I used aluminum repair rod to repair leaking rivets on an old jon boat and it worked well."
Mr. CAP in Corpus Christi, Tx says "I repaired broken tip of outboard aluminum propeller with aluminum rod and was
as hard as original.
You can repair boats, jon boat, canoes, lawnmowers, motorcycles, air conditioning equipment, refrigeration units,
drill motors, routers, saws, blocks, heads, oil pans, valve covers, chainsaws, weedeaters, four wheelers, all kinds of
air tools and the list goes on and on.
I sell aluminum repair rod to welders, auto mechanics, motorcycle mechanics, boat repairmen, outboard motor repairmen,
radiator repairmen air conditioning repairmen and lawnmower mechanics all year long many times for $49.95 for a pack
of 25 rod. About $2 per rod.
The pack of rod in this auction contains
25
aluminum repair rod. Approximately 1 pound.
Each rod is 18" X 1/8". We do not cut our rod into short 9" lengths.
This is new fresh rod, and the rod will never go bad. There is no flux in or on it, so there is nothing to go bad.
Please do not use any kind of flux, No chemicals. No acid, no jells, no resin of any kind.
Just file, sand, grind, or sandblast down to bare metal and you are ready to start. No need to have to use a stainless
steel brush.
The price on this auction is truly wholesale. You cannot get anymore wholesale than this. You set your own price.
The pictures are showing 1 pack of rod in a bulk box of rod. The box of rod has 1200 rod in it.
What you are bidding on is the pack of rod with the red caps on it that contains
25
rod.
NOT THE BOX OF ROD.
Do not use this torch. It will not perform.
Full, easy to understand instructions come with each pack. 
We combine shipping when you win multiple auctions.
Please click on "details" at top of listing to determine s&h to your address.
Will accept paypal.
PLEASE BID NOW
We accept paypal.
Duties, taxes and fees assessed in the buyer's country are the responsibility of the buyer.
Feedback received from customer
|
Quialty product USA made, personalized attention, many thanks |
great product....realy work good. thanks.
I rec'd item super fast and would buy here again. AAAAAA++++++
Helpfull tech info along with Great! AAA+ service ! The way all biz should run !
Got what I ordered; thanks for the quick shipping.
Product was just as described. Excellent Communication. Fast service. A++++
Great ebayer hope to do business with again! A+A+A+A+A+
fast delivery product works
GREAT ROD EASY TO USE
quick shipping I've used the rod and was able to repair the item and saved $99
Great quality, quick shipping, highly recommended
Came as listed!! Lightning fast shipping!!! Works PERFECT!! ANYONE can do it!!
The rods shipped very quickly, thanks!
class act it really works
CLICK HERE TO PURCHASE LARGE PACK
VERY FAST, PROFESSIONAL. GOOD STUFF, I'LL BE BUYING MORE!
VERY FAST, PROFESSIONAL. GOOD STUFF, I'LL BE BUYING MORE! AAAAAA++++++++++++++
We combine shipping when you win mu;tiple auctions.
We accept paypal.
We combine shipping when you win multiple auctions.
Please click on "details" at top of listing to determine S&H to your address.
We accept paypal.
PLEASE BID NOW!
Powered by eBay Turbo Lister
wflbp