DSM Fuel Pump Rewire Kit





Rewire your stock 18GA fuel pump wiring with low resistance, oxygen free, Oil and Gasoline Resistant 10GA wire and OEM QUALITY automotive relay. This kit includes everything you would need to rewire your stock 1990-1999 Mitsubishi Eclipse, Eagle Talon or Plymouth Laser's fuel pump wiring.

The high-flow in-tank fuel pumps, such as the Walbro 255, need a steady supply of voltage to push additional fuel. Many people will notice that they can hear the pump noise varying as they are sitting at a light with the directional signal on. This is a sure sign that your pump is starving for voltage.

Rewiring the fuel pump with a larger gauge wire can help the stock pump (or any aftermarket pump) maintain higher fuel pressure/volume throughout its' entire operating range, as the stock wire is pretty small. The small wire limits the voltage to the pump, and under high boost, the lower voltage can severely affect fuel output. Some people have measured 10 volts or less at the pump under high boost with the stock wiring. Adding a larger wire and relay to feed the pump can restore the voltage to that of the battery (usually 13-14V), maximizing pump output.





Comes with everything, even car specific instructions. If you don't understand a step in the instructions you can e-mail me and I will help you in every way possible.

Guarantee:

All parts are new, never used. We guarantee every part we sell to be exactly as described and free from defects. If upon arrival there are any problems, send it back and we will replace it free of charge. We also warrant the relay for 90 days after shipment to be free from defects or we will send you a new one!


Payment:

I prefer Paypal

On Jan-19-05 at 15:02:03 PST, seller added the following information:

After purchasing, pay instantly with your credit card through PayPal!
Pay me securely with any major credit card through PayPal!
VisaMasterCardDiscoverAmerican ExpresseCheck



We will be CLOSED