DeVilbiss GTi Pro LITE gravity feed spray gun.
**Please specify what set-up you require when ordering**
Air cap:
HV30
TE10
TE20
T110
Fluid tip:
Either 1.3mm + 1.2mm
Or 1.3mm + 1.4mm
Spraygun Colour :
Gold, Blue, Black
Every spraygun has a 1.3mm nozzle set-up with a spare 1.2mm or 1.4mm fluid nozzle in the box.
T110 - Clearcoat (higher solids) and super smooth finishing
High performance Trans-Tech atomisation technology best suited to clearcoating and glosses.
This aircap brings new levels of performance, particularly in the application of the latest compliant clearcoats.
It also scores highly in its ability to eradicate dimple defects that can occur with low solvent clearcoats; does not have the same transfer efficiency of the other caps though.
As OEM finishes are not that smooth, does not always suit such as when using lower solid technology.
Particularly suited to classic car finishers or industrial applications as it applies like glass.
Air consumption: 9.4cfm- 265l/min.
TE20 - Faster flow gloss/lacquer
All round gloss / clearcoat gun.
Flow rate and fan pattern lend themselves towards a wetter application style.
Compliant trans-tech high transfer efficiency (but not HVLP)
Fluid tip sizes available: 1.2, 1.3 and 1.4. For 2K gloss / clear the 1.3 is by far the most popular choice and is recommended by the majority of paint manufacturers for their HS 2K products.
Atomisation Technology: High Efficiency
Air Flow L/min: 360 (12.7 cfm)
Fluid g/m: 170 - 200
Pattern Height: 285 - 300mm
HV30 - HVLP Max Transfer efficiency
This aircap delivers maximum transfer efficiency rates so is particularly suitable for waterborne basecoat application.
Air Flow L/min: 460 (16.3 cfm)
Fluid g/m: 160 - 190
Pattern Height: 300 - 325mm
TE10 - Solvent & all rounder
Trans-tech high transfer efficiency, not HVLP and best suits solvent basecoat - though can be used for waterbased and also lacquer - this is a good all rounder to do multiple tasks.
Suits basecoat application in a more traditional (non HVLP) style.
Particularly suits solvent basecoats however is sometimes favoured / recommended by some paint companies for waterborne basecoat application.
This is a 'Trans-tech' air cap, which is compliant but is not HVLP. This means the spray pattern is more eliptical (squat/rounded) than the open flat (wide fan width) pattern found on the H1 air cap. See info pack button above for more info.
Atomisation Technology: High Efficiency
Air Flow L/min: 270 (9.5 cfm)
Fluid g/m: 160 - 190
Pattern Height: 290 - 310mm
The boxed kit includes:
The complete anodized gun - Available in colours; black, blue or gold
Gravity cup with paint filter
Set of four coloured identification rings
Torx driver/screwdriver
Cleaning brush
Combination spanner
Instruction/spare parts manual
Technical Specifications
- Cup Capacity: 560ml
- Weight (gun only): 446g
- Weight (gun & cup): 629g
- Air Cap: Plated Brass
- Air Cap Retaining Ring: Clear Anodised aluminium
- Fluid Tips: Stainless Steel
- Fluid Needle: Stainless Steel
- Air Inlet Thread: 1/4” Universal
If you can't find what you are looking for get in touch or have a look at our main website, (you can still pay with PayPal - an eBay company).
You can also find more product details and spares on the Sprayguns Direct website.
All our items now come with FREE UK DELIVERY.
The service included in this offer varies depending on the item however you do have the option to upgrade to a faster service if required. Your item leaves us immediately.
UK
- 2nd Class - 2-3 working days. UK and surrounding British Isles (not Eire/Irish Republic) for (maybe longer for remote islands).
-1st Class or 1st Class signed - 1-2 working days. UK and surrounding British Isles (not Eire/Irish Republic. May be longer for remote islands).
-Next working day - Delivery time applies to British Mainland only excluding Scottish Highlands.
Overseas
-EU service - post -2-9 working days. (average figure provided by postal service). We also often use UPS for EU locations where we state post, this is because it is a better service but cannot be offered to all areas due to UPS imposing "remote area surcharges" on some locations.
-EU service - UPS - 2-6 working days. The further from the UK you are, the longer the wait. Sometimes we upgrade shipping to carrier for multiple purchased items.
-Rest of the World - 3-9 working days. Mail service (average figure provided by postal service).
These timelines are given based upon us shipping orders received before 2 P.M. G.M.T. / B.S.T Monday - Friday. Although the courier and mail service we use are generally very reliable and predictable, there may be delays out of our control during exceptionally busy periods or severe weather.Mail services can be more prone to delays in certain countries, particularly when mail goes by air.
Sprayguns Direct was first conceived in 2002 as we recognised the advantage of specialising in this complicated area of the market.
The emphasis on online sales, backed up with specialist staff, helps us provide you with all the information you need to find exactly what you are looking for. We have since expanded in to all supplies for the bodyshop or paint shop and are authorised UK distributors for DeVilbiss, Sata, Iwata, Graco, 3M, Sealey, Standox, Dupont and more.
Spraygunsdirect Ltd. is a division of Morleys of Derby Ltd., a family business, established in 1966 and is run by the founder; David Clarke with the assistance of his three sons. The company also has a large support of specialist staff including ex sprayers who have been trained by DeVilbiss and Sata.
You will be supplied with a V.A.T. tax receipt.
All items come with a minimum of twelve months warranty against failure of any component that is not down to normal wear and tear (or abuse). This applies internationally. As products are sourced direct from the manufacturers, then you also have access to their technical services.
We strive to provide the best possible service. If you feel you can’t give us 5 stars for any aspect of our products or service please get in touch on 01332 611893 or at info@spraygunsdirect.co.uk and give us the opportunity to address any issues. Your feedback is very important to us and greatly appreciated.