9" 800 x 480 resolution 4-Pin Connector TFT LCD Monitor
4-Pin Number Plate Camera + Waterproof IR CCD Camera For your different needs
2x 10m 4-Pin Waterproof Shield Cable
Remote Control
Image can be rotated horizontally and vertically for mirror or normal viewing
Monitor automatically turns on and switch to rearview camera when reversing
Support 2 channle video inputs, V1/V2 Selectable
Take 4pin technology
One cable solution deals with both power and singal transmission. No power cable is needed to connect camera. It will shield vehicle's circuit interference better than normal AV cable. Rubber cot is attached to cover the connector, so that the connector can avoid water flushing.
Mirror Normal Image Switch
Monitor's image can be rotated horizontally and vertically for mirror image (reversing) or normal image. (front or side view)
9 Inch 800 x 480 digital LCD, wide view angle, brings more details and crystal clear picture from CCD cameras
Monitor can be roof mounted or dash mounted to meet your special need
1. Null
2. Null
3. Mode (16:9/4:3)
4. Video 1 / Video 2
5. Hue -
6. Menu Setting
7. Hue +
8. Power on/off
9. Vidoe 1 / video 2
10. Power on/off
11. Hue -
12. Menu
13. Mode
14. Hue +
4 Pin Connector Wateproof &Shockproof CCD Camera
IP 67 waterproof grade can cope with marine environment
Power cables are not needed for the cameras.
This system is supplied by 12V-24V vehicle power supply.
We will send 2 Mirror Image cameras as default, please leave us a message for special need.
2 x 10m(33ft) 4-pin shied video cable is included in this kit. Please leave us a message if you have special requirement for extra extension cable.
Difference of Non-mirror image and Mirror image cameras
Non-mirror image is normally used for front view
Mirror image camera is only used for reversing
Difficulty in detecting the rear of your large vehicle when reversing ? This camera is a neccessity. Mount at the recommended place and enjoy reversing !
Heavy Duty Camera | ||
Connector | 4pin |
|
Sensor | 1/4 "SHARP Color CCD | |
Horizontal Resolution | 420TV Lines | |
Effective Pixel | NTSC : 510(H) X 492(V) PAL : 500(H) X 582(V) |
|
Mimimum Illumination | 0LUX (18 IR LEDs for night vision) | |
View Angle | 120° | |
Voltage | DC12V ~ 24V (Depending on monitor) | |
Waterproof Grade | IP67 | |
Shockproof | 10G | |
Mounting Place | Any place inside or outside the vehicle | |
Reversing Monitor | ||
Connector | 4pin |
|
Type | 9inch TFT LCD Color Monitor | |
Color System | PAL / NTSC (AUTO) | |
Display Resolution | 800(H) X 480(V) | |
Video Input | 2 Channel | |
Brightness | 250(cd/m²) | |
Operating Temperature | 0°C ~ +40°C | |
Voltage | DC 12V ~ 24V | |
Power Consumption | 12W |
We strongly recommend you to make a bench test before you gonna install the kit on your vehicle. As in many cases, monitor or camera was damaged by incorrect connection or unstable power on vehicles.
Note: We will ship Mirror Image camera as default. Please feel free to leave us a message for special needs.
| |||||||||||||
Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you: | Remarks: |
PayPal: We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge) Remarks: |
30 Days Money Back Guarantee: | Free Replacement: |
Suppliers Warranty: | Requirements: |