Features:

* This mount adapter is of great help for fitting lens with Leica Thread Mount M39 (LTM) to camera with Micro Four Third system camera body such as Panasonic Lumix DMC-GF1 G10 G2 GH2 GF2 G3 GF3 GX1 GF5 G5 GH3 GF6 G6 and Olympus PEN E-P2 E-PL E-PL1s E-PL2 E-P3 E-PL3 E-PM1 E-PL5.

* Although the lens will fit physically, aperture control and auto-focusing control are not retained. 

* In this case "stop-down mode" will need to be used when metering since the lens does not have the ability to have its aperture controlled by the camera body.

* Using A or P mode the camera sets down the exposure value automatically but the parameters of the aperture should be set down on the lens manually.

* Preserve all focusing range up to the infinity point.

Compatibility:

* LEICA M39 LTM L39 LENS

* PANASONIC M43 MICRO 4/3 OLYMPUS E-P1,E-P2, E-PL1, Panasonic G10, G2, G1, GH1, GF1, G1-HD etc. CAMERA BODY

Material: Black Anodized Aluminum 

Installation Guide:

1.Attaching the adapter to the lens.

  First,position the corresponding model lens in the adapter ring's bayonet mount/screw mount,with the lens's white dot aligned with the red dot on the adapter's front side.Then,twist the lens clock-wise until it click-locks into place.

2.Mounting the adapter with lens on the camera

  When the camera is powered off,position the adapter ring of the assembly in the camera's mount,with the red dot on the adapter's rear end against the red dot on the camera's lens mount.Then,twist the adapter with lens clock-wise until it click-locks into place.

3.To remove the adapter ring with lens from the camera,press the lens release button on the camera and twist the adapter counter-clockwise.

User Guide:

* Taking Photos

  Switch camera to manual focus (MF)mode.Take photo of object,then evaluate result on monitor screen.

Package Contents:

* KIWIFOTOS LMA-M39_M4/3  x1

* Operating Manual x1