Click below to see more views: |
Product Features:
- Plugs directly into the factory harness. No rewiring necessary
- Uses all the factory sensors
- Includes start up calibrations
- Maps can be password protected
- Runs on Windows-compatible software
- Full idle control
- Programmable traction control
- Two step launch control
- User configurable soft-cut rev limiters
- Wet or dry nitrous control
Availability: Usually ships in 1-2 days.
PLEASE REVIEW INSTALLATION MANUAL PRIOR TO PURCHASE HERE.
Part Number: |
30-6310 |
Make(s): |
Mitsubishi, Eagle |
Model(s): |
Eclipse GS-T, GS-X ('95-'99)
Eclipse GS, RS ('00-'02)
Lancer Evolution VIII ('03-'05)
Talon TSi ('95-'98)
|
Engine(s): |
4G63T (Eclipse 2G, Talon, Evo VIII) 4G64 (Eclipse 3G w/ 4cyl) |
MSRP: |
$1,992.67USD |
Notes: |
| |
Specifications: |
Outputs |
Injector Outputs |
6 Peak & Hold, 6 Saturated |
Coil Outputs |
6 |
Selectable direct drive or 0-5V Coil Output |
Yes |
General purpose LS outputs |
12 |
General purpose HS outputs |
4 |
Individual cylinder ignition trims / fuel trims |
Yes / Yes |
Drive-By-Wire Control |
Yes |
Inputs |
Trigger inputs (Ref/Sync) |
4 |
Analog voltage inputs |
18 |
Configurable Analog/RTD/Thermister inputs |
4 |
Switch inputs |
5 |
Lambda inputs |
2x |
Knock sensors |
2 |
User adjustable knock sensor center frequency |
Yes |
Communication |
USB comms / RS232 comms |
Yes / Yes |
Communication cables included |
Yes |
Fully enabled editing/logging software included |
Yes |
CAN bus equipped |
Yes |
RS232 / CAN datastream output |
19 ch / 19 ch |
Communicates with AIM/Racepak Dash/Dataloggers |
Yes / Yes | |
DATA Acquisition |
Internal data logging / Datalog rate |
1 MB / 250 Hz |
PC logging / Data analysis using AEMLog |
Yes / Yes |
Functions and Features |
All channels/maps/tuning options unlocked |
Yes |
Boost control / Groundspeed based boost target |
Yes / Yes |
Nitrous injection / Staged injection |
Yes / Yes |
Ground speed limit / Acceleration Rate Control |
Yes / Yes |
Overrun boost enhancement (anti-lag) |
Yes |
Gear change ignition cut (shift-without-lift) |
Yes |
Password protected calibrations |
Yes |
Fuel & Ignition rev limiters |
Yes |
"In cockpit" global fuel trim capability |
Yes |
Gear dependent shift light |
Yes |
Evap/Purge function |
Yes |
DC Motor control |
2 Ch |
Software definable "virtual" switch inputs |
2 |
EGT Based fuel trims |
Yes |
Physical Dimensions |
Length |
192 mm |
Width |
150 mm |
Height |
37 mm |
Finish |
Black Anodized |
|
Payment:
- Payment is accepted only through Paypal.
- We will only ship to the Paypal confirmed shipping address.
- Payment for orders should be made within 5 business days.
- Sales tax will be charged for orders from California.
Shipping and Handling:
- Most orders generally ship within 2-3 days from our warehouse.
- Orders are shipped through a major carrier. Most domestic orders ship through US Postal Service or UPS Ground services.
- Expedited shipping is available at additional cost. Please contact us for expedited shipping.
- Shipping to Alaska, APO/FPO, Guam, Hawaii, PO Box, Puerto Rico, U.S. Virgin Islands and any other U.S. Territory is by the US Postal service. Additional costs may apply.
- International orders are generally delivered within 7 days from date of order. Extended regions may require up to 14 days to be delivered.
Returns:
- Customer is responsible for return shipping.
- Returns must be made within 14 days of delivery of order and parts must be unused and in original manufacturer packaging.
- Custom order parts cannot be returned.
|
|