KYOSHO D ( Series) BRUSHLESS CONVERSION 7075  ALLOY MACHINED DIFF MOTOR MOUNT

• Kyosho's d platform chassis is a production line of rc cars including kyosho dbx-drx-dst-dmt-drt .
• All those cars are available in (gp) and (ep) versions.
• Since now no part was available to convert a kyosho nitro d series to electric.
• With this motor mount you ll be able to convert you nitro d (series) kyosho car to electric just replacing the stock plastic center diff bulkhead with the alloy motor mount ...no modifications ,no new holes on the chassis!
•  This motor mount  is also compatible with all the kyosho electric (ve) d-series cars and also a very good upgrade part if you are really want to go with  massive power motors ,you only need to remove the stock motor mount and replace the plastic diff bulkhead with the 7075 alloy diff motor mount!
•  Special designed for 1/8 sized motors like castles 1515 (mamba monster) and all the 42mm dia motors ex(leopard 40 series,tekin r8,team orion vortex 8,tenshock 802/812 series etc) but also compatible with smaller (36mm dia) motors like the stock team orion ve has !
• Machined from best quality 7075 t6 alluminum ,this thick (8mm) motor mount is a solid part that will keep your motor cooler , you ll also be able to use a large teeth range of pinion gears from very small to huge depending on the motor and the final drive ratio you want on your car!
• See all the attached photos with the motor mount installed on a kyosho drx nitro version and electric (ve) version and if you have any question please contact me for further details
  

COMPATIBILITY:All the kyosho d series cars like kyosho drx-dbx 2.0-dst-drt-dmt nitro or electric versions also the older (short chassis) dbx version  are compatible with this motor mount

INSTALLATION:Replace the plastic diff  bulkhead with the alloy motor mount ,no modification , no new holes.

ACCEPTABLE MOTORS:All the 36mm or 42mm diameter motors like 540 or 550 type or 1/8 sized motors -you can use whatever motor you prefer up to 42mm diameter with m3 mounting holes.

INCLUDING: (1) Machined alloy 7075 t6 motor mount for kyosho d (series)

WHAT ELSE DO I NEED ?
(4)  m3x12mm screws are needed to bolt the motor mount to chassis .

• There is also available a battery tray machined on high grade plastic for a complete electric conversion on your nitro d (series)
  

         With this battery tray you ll be able to use 4-5s or even 6s batteries on your gp converted car.

         Although the motor mount is compatible with all the nitro and electric d (series) the battery tray is compatible ONLY with the nitro d (series)

         cars , if  you want to use it on a ve you must drill new holes on the chassis.

If you want to buy the complete conversion including the motor mount and battery tray please message me and i ll send you a invoice for both parts for a total value of 75$ including shipping!

PLEASE VISIT OUR BLOG   WWW.BRUSHLESSMANIAC.BLOGSPOT.GR