PP2000 lexia 3 Diagbox V7.62 Citroen Peugeot Diagnostic Interface with cables 

The latest A.1281 Z interface the updated version of the the older 9780 Z5 

These are the ones the main dealers have 

Why buy the older 9780.Z5 interface when this is the newer version 

Only UK seller to offer the new interface A.1281 Z 

Fully designed for the latest 2016 models 

The Latest 2016 Revision C Version interface with the latest Original Diagbox V4.3.3 firmware installed 

All interfaces are fully tested, full global, on a Citroen or Peugeot car/van, no one on eBay does this

Check my pictures taken doing full global in several different cars

Some use V4.3.0 firmware, the older one and does not work with v7.62

100% Full Software and firmware, not hacked like others who offer only Diagbox v7.57 or below 

These work the same as the Original dealer interface at a fraction of the price 

I'm not the cheapest, but these are the best, my support is second to none 

You are paying for the most up to date interface on ebay 

I will give you 100% loading support, I have never failed to help anyone, check my feedback 

Supplied with the latest Diagbox V7.01 dealer software 

Included are FREE updates to V7.62, this is the most stable version 

Full dealer profiles are included for product activation with full instructions, pictures and Video

You will have no online access to PSA servers

No Service boxes or SEDRE included, the desktop links will not work 

Can be used with Windows XP SP 3 32-bit, Vista 32-bit,Windows 7 32-bit and Windows 8 32-bit 

NOTE : THIS WILL NOT WORK WITH ANY 64-BIT WINDOWS or WINDOWS 10 

Seen running on Windows 7 32-bit in the pictures 

A must for anyone that repairs or has a Peugeot or Citroen car 

I have supplied many of these interfaces to garages, dealers and Peugeot and Citroen technicians 

And Yes it does work fine with the 307 and C5 

For the following Cars and Vans 

Citroen : C-ZERO, C1, C2, C3, C3-XR, DS3, C4, DS4, C5, DS5, DS 5LS, C6, C8, C-CROSSER, NEMO, BERLINGO, JUMPY, AX, SAXO, BX, ZX, XSARA, XANTIA, XM, EVASION, C15 

Peugeot : ion, 107, 206, 207,207+,208, 301, 307, 308, RCZ, 407, 408, 508, 607, 807, 1007, 2008, 3008, 4007,4008, 5008, BIPPER, PARTNER, EXPERT, BOXER, 106, 205, 306, 309, 405, 406, 605, 806 

The newer Vans BOXER III , BIPPER , NEMO and JUMPER will need the S.1279 module as well

http://www.ebay.co.uk/itm/261971318110?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1558.l2649

1.Read identification 

Displays complete identification of control unit, e.g. part number, software/hardware version, manufacturer, etc... 

2.Read fault codes 

Displays all stored and pending fault codes with complete description 

Program supports report printing or copy to clipboard. 

3.Clear fault codes 

This function clears all stored fault codes and other diagnostic information. 

4.Auto-scan (complete car scan/test) 

Detects all ECUs (electronic control units) installed in car and reads all diagnostic fault codes. 

5.Measured Values 

Program displays live Data like Engine Speed, Battery voltage, Oxygen Sensor, Coolant Temperature, etc. Values can be displayed in graph, 9 values at once, or full listing (all measured values). Logging to file is also supported, which allows offline analysis. 

6.Actuator test 

Actuator test activates particular actuator (e.g. turn on fuel pump, lock/unlock wheel, lock/unlock doors, cut off fuel, etc..) 

7.Programming functions/Adaptation 

This feature is of great importance in all vehicles because systems like Engine control units, Immobilizers, Airbags, Alarms, Body Control Units, and some others, require you to perform reset or programming procedures after car repair is done, or even configuration after replacing broken Control Unit 

PP2000 Software Languages 

English, German, French, Japanese, Chinese, Russian, Arabic, Spanish, Turkish, Danish, Iranian, Greek, Hebrew, Hungarian, Indonesian, 

Italian, Dutch, Norwegian, Polish, Portuguese, Finnish, Slovenian, Swedish, Czech, Croatian, Thai 

Lexia 3 Software Languages 

English, German, French, Japanese, Russian, Spanish, Portuguese, Swedish, Turkish, Dutch, Polish, Italian, Hungary, Greek, Czech 

Package includes 

• Main interface with tail to OBD II cable 

• Long 9pin to USB cable 

• Short 9pin to USB cable 

• 30pin adapter for older vehicle types, OBD I 

• 1 DVD with Printed instructions in English to help with the install of the software, written by myself, no Chinese rubbish

Collection welcome