This is a very light weight (only 630g per panel) 20w high efficiency WEATHER PROOF Epoxy Solar Panel with NO GLASS (safe and mobile). It comes with 4m cable attached to the panel (to connect between the panel and controller). The 10A PWM charger controller can be use to charge / top up lead acid 12v car battery or leisure battery. 4m cable c/w fuse and battery clip is included to connect between the controller and the battery.

This is one of the lightest 20w package available, just under 0.9kg all together, very mobile and compact.


Advantage of Epoxy solar panel:

1) Much lighter

2) No glass - much safer

3) Will not crack or condensate (no glass, no frame, no joint), the PV cells are fully seal by the clear epoxy/resin

4) Much thinner and more mobile

5) The panel is not 100% rigid, the extra "give" in the epoxy will help to dampen some vibrations to the PV cells when on the move or in the event of small impacts.


Can be use for:

Motorbike

Caravan

Boat

Camping

Farm

Garden Shed

Car

RV 

Included in this package:

1 x 20w epoxy solar panel with 4m cable attached to the connection box at the back (to connect to the controller).

1 x 10A PMW 12v/24v auto switching charger controller c/w English instruction

1 x 4m cable c/w fuse and NEW large battery clips (to connect between the controller and battery)



Size CM                                               Weight
20w45 x 35 x 1.5(inc connection box)650g





Maximum power voltage:
17.8V


Maximum power current: 
1.14A


Open circuit voltage: 
22.4V


Short circuit current: 
1.23A


Power allowance range:   +/-5%

  • High efficiency solar panel
  • Low degradation. Power output warranty: 5 year-95% 10 year-90% 25 year-80%


    • 10A Advance Pulse Width Modulation (PWM) Charge controller:


    • Automatic 12v/24v recognition
    • Fully 4 stage PWM charge management
    • Day/night recognition
    • Dual mosfet reverse current protection
    • Protection from over-charging, deep-discharging and reverse connection from both solar panel and battery
    • Protection from short circuit and over current
    • LED indicator to show charging/fault/battery status/load status etc
    • LED digital display to show the load work mode and status
    • Self-consumption: 10mA or less
    • Working temperature: -35C to 60C
    • Working Humidity : 10% to 90% RH
    • Size: 14 x 7.5 x 3cm
    • Weight: 180 g
    • Terminals for wire up to 6mm2
    • English instruction


    This 10A controller can handle more then 2 panels, you can add extra panels to the systems, message us after you have made your order if you need to add more panels.

    1 x 10w panel + 10A controller c/w 5V USB output also available:

    http://www.ebay.co.uk/itm/10w-Solar-Panel-4m-cable-10A-Charger-Controller-for-12v-Battery-c-w-5V-USB-/261912353933?pt=LH_DefaultDomain_3&hash=item3cfb315c8d


     

    http://www.ebay.co.uk/itm/10w-Solar-Panel-4m-cable-10A-Auto-Charger-Controller-for-12v-24v-Battery-/251981126147?pt=LH_DefaultDomain_3&hash=item3aab3eda03


    UK Royal Mail FAST DELIVERY and NO HIDDEN COSTS for UK and EU