SUZUKI GT750 / TR750. Full Set of Gr5 TITANIUM CRANKCASE BOLTS WEIGHT SAVING

These are titanium crankcase bolts for weight reduction.

Anybody who owns a GT750 or a TR750 or is working on a TR750 replica project knows the serious weight of one of these engines!

These are one of the many modifications which we're making to reduce the weight of the GT750 or TR750 to increase performance and improve handling.  

The original GT750 base studs weigh in at 1.15kg 

- these weigh only 0.68kg a saving of almost half a kilo!


We strongly recommend you run a tap down all the threads before assembly. Some of them can be made deeper, as these engines and cases vary considerably.

Also includes Hard Aluminum washer for each Bolt.

Casing NumberLength 
1M10 x 100Case Needs Machining Down 24mm
2M10 x 100 
3M10 x 100 
4M10 x 100 
5M10 x 100 
6M10 x 100 
7M10 x 100 
8M10 x 100 
9M8 x 45 
10M8 x 110 
11M8 x 45 
12M8 x 45 
13M8 x 110 
14M8 x 95 
15M8 x 95 
16M8 x 60 
17M8 X 45 
18M8 x 45 
19M8 x 45 
20M8 x 75 
21M8 x 85 
22M8 x 110 
23M6 x 108 
24M6 x 85 
25M6 x 35 
26M6 x 35 
27M6 x 35 
28M6 x 35 
29M6 x 35 
30M6 x 35 
31M6 x 95 
32M6 x 95 
33M6 x 110 

Now available are drilled aluminium head nuts and titanium head bolts which save over a kilo and which make the head look more like an original TR, cylinder base studs in titanium and also made to order engine mount bolts in titanium.

Some feedback we have had in relation to this item:

Cheers, loveley bits as ever


Part of an ongoing project to create new TR750's including dry clutch with magnesium cover & lifter (the spider is already cast and here), straight-cut primary drive gear (already here), titanium studs, crankcase and engine mount bolts (available), cylinder head straight-plug, skull-cap, o-ring conversions, porting, down-drafting carbs (the later of these two already available), aluminium swing-arm for lowboy frame, ignition side castings and ignition, water-pump drive gears, 3-pull throttle assemblies etc etc.  If you'd like to be kept posted please send your details to brock@bdkraceeng.co.uk and we'll put you on the mailing list.


B.D.K. RACE ENGINEERING.

ASHWELLTHORPE INDUSTRIAL ESTATE, ASHWELLTHORPE, NORWICH, NR16 1ER

 TELEPHONE: 00 44 (0)1508 481 713  

Email: brock@bdkraceeng.co.uk  We are on the web too

WORLD WIDE CYLINDER REPLATING SERVICE

COMPANY REGISTRATION NUMBER 6039135 VAT NUMBER 460 4697 35