MKS Mini V1.2 Controller Board + 2.8" MKS TFT28 V1.2 LCD for 3D Printer RepRap
MKS Mini V1.2 3D Printer Kit
MKS Mini V1.2 Controller Board:
Features:
MKS MINI is a feature all-in-one electronics solution for Reprap and other CNC devices.It features an onboard ATmega2560.
MKS-MINI is suitable for One-Extruder and no bed printing.
It's four motor outputs are powered by DRV8825 stepper drivers.
The board can use the same firmware as Ramps1.4.
The mounting hole locations is the same as Arduinos Mega2560.
The power supply with 7805, more stable and reliable than the 1117, but only supports 12V.USB to serial modules is 16U2, the same as Arduinos Mega2560.Without hot bed heating output, but has bed thermal interface and bed control signal interface.
Specifications:
Arduino MEGA compatible Atmega2560 processors are compatible with all RAMPS class firmware
Easy DISPLAY + SD-CARD connector,RepRap Discount
Smart Controller compatible pin header on board
Firmware can use the same configuration as ramps1.4
2x temperature ADC connectors for thermistors
up to 4 motor driver with DRV8825
2x PWM capable power mosfet outputs with voltage selector for MainPower.(Extruder0,Fans)
6x end stop connectors with power supply Xmin/Xmax/Ymin/Ymax/Zmin/Zmax
4 layers PCB, optimize heat dissipation.
Recoverable fuse for short-circuit protection.
2.8" MKS TFT28 LCD Screen:
MKS TFT28 V1.2 is a Colorful Touch Screen LCD Display, design by Makerbase and Duitable for many types open source 3D Printers. MKS TFT28 is suitable for many main board such as Ramps1.4 and MKS Base,MKS Gen,MKS Mini.
Features:
2.8 inch colorful touch screen LCD, support U disk and SD card.
Support continual and easy software update.
Suitable for many main board such as Ramps1.4 and MKS Base,MKS Gen,MKS Mini.
P&P, do not need to modify your firmware, support Marlin、Smoothieware and Repetier.
Support “situation save when power breakout” function. Using this function, you should choose Pause action first before you breakout the power. When you open the power again, the printer can run from the situation before you breakout the power.
No need to adjust firmware, support Marlin,Smoothieware and Repetier.
Support keep printing and saving on outage.
Support MKS Wifi module.
MKS MINI V1.2 Board User Manual ,Please Click Here.
MKS-TFT28 Touch Screen User Manual ,Please Click Here.
Caution:
1) Do not plug or unplug and wire or module when power is on, do not even touch the board when power is on or your hand has static charge(you can remove static charge by touching metal tap) .
2) Always double check power wire is properly installed. If you do not follow above move, you can damage the control board and your 3D printer.
Package include:
- 1x MKS Mini V1.2 3D Printer Controller Board
- 1x MKS TFT28 v1.2 Touch Screen for Ramps V1.4
- 1x USB Cable
- 1x Flat Cable
Payment
-
Payment methods accepted
: PayPal only.
-
All major credit cards
are accepted through our secure payment processor
PayPal.
-
Payment must be received within 7
business days of auction closing.
-
As a buyer, it is your duty to pay the
import duties and taxes, Local Taxes,
VAT, or
other hidden charges when you
make an order from abroad.
Shipping Policy
- We ONLY ship to your
PayPal address. Please make sure your PayPal address is
correct before you pay.
- We ship your orders within
1 business days after the payment cleared.
- Item shipped from China via China Post Air Mail, reach most of the
countries within 15 to 20 days.
- Delivery time depends on destination and other factors, it may takes
up to 20 days. If you don't receive the item after 30 days, please
contact us, we'll investigate and solve the delivery problem.
China Post Airmail Estimated Arrival Time Schedule
Country |
Business Days (exclusive
weekend and holiday) |
<10 |
10-14 |
15-21 |
22-28 |
29-35 |
>35
|
USA
|
Percentage of Arrival
|
5.2%
|
37.2%
|
33.5%
|
18.8%
|
4.5%
|
Refund
|
Canada
|
Percentage of Arrival |
3.2% |
40.1% |
29..7% |
22.3% |
4.0% |
Refund
|
Australia
|
Percentage of Arrival |
20.9% |
46.90% |
19.3% |
8.9% |
3.8% |
Refund
|
UK
|
Percentage of Arrival |
9.8% |
50.9% |
26.1% |
7.4% |
3.7% |
Refund
|
France
|
Percentage of Arrival |
5.5% |
27.6% |
45.5% |
17.2% |
6.9% |
Refund
|
Germany
|
Percentage of Arrival |
5.7% |
21.3% |
31.9% |
20.9% |
18.5% |
Refund
|
Scandinavia
|
Percentage of Arrival |
5.5% |
25.8% |
42.8% |
20.1% |
5.8% |
Refund
|
Other Country
|
Percentage of Arrival |
3.5% |
19.8% |
39.8% |
28.2% |
6.8% |
Refund
|
Return Policy
- You have 7 days to contact us and 30 days to return it from the
date it was received, return shipping is to be
paid by the Buyer.
- All returned items MUST BE in the original packaging and you
MUST PROVIDE us with the shipping tracking number, reason for the
return, and your eBay ID.
- We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components and
accessories included, AFTER BOTH Buyer and Seller cancel the
transaction from eBay. OR, you may choose to have a replacement.
Contact us
- At any time you can email or eBay message us for any question. We will reply within two business days. Reply
might be delayed during holiday and long weekend.
- If you do not get our reply in time, please resend the
email and login to your My eBay message center and send
message again.
- Our China office hours are:
9:00 a.m. to 18:00 p.m. (GMT +8) of Monday to Friday
9:00 a.m. to 12:00 p.m. (GMT +8) of Saturday
|
On 21-Jun-16 at 12:01:39 BST, seller added the following information:
|