Professional Pu Foam single-component professional HIGH YIELD 45 LITRES P66

P66 MULTI PURPOSE PU GUN FOAM

Demsun P66 is single-component PU foam used with an applicator gun and features higher yield, easierapplication and reusability. It does not contain any propellant gases which are harmful to the ozone layer.

PROPERTIES

Excellent adhesion & filling capacity and high thermal & acoustical insulation value.

Economical consumption thanks to precise application.

High yield up to 45 liters depending on temperature and humidity.

Conforms to fire class B3 according to DIN 4102-1.

Mould-proof, water-proof and over paintable.

APPLICATIONS

Fixing and insulating of door and window frames.

Filling and sealing of gaps, joints and cavities.

Filling of penetrations in walls.

Insulating electrical outlets and water pipes.

INSTRUCTIONS

Optimal can temperature is +20 C. Application temperature is between +5 C and +30 C. Shake the canwell before use. Screw the can onto an applicator gun. The output of the foam can be regulated with thetrigger and controlled with the adjustment screw on the back side of the gun. Always keep the can upsidedown during application.Fresh foam can be cleaned by Demsun C80 Foam Cleaner. Cured foam can be cleaned barelymechanically.

STORAGE AND SHELF LIFE

15 months if stored properly.

RESTRICTIONS

Storage above +25 C and below +5 C shortens shelf life.

Should be stored and transported in vertical position.

Should be kept in room temperature for at least 12 hours before the application.

Cured foam will discolor if exposed to ultraviolet light.

Paint or coat the cured foam for best results in outdoor applications.