11/2016  18x4

59,31,33 two pieces,15   

You are bidding on a 5.0 Megapixel dedicated camera with 0.45x nose piece for a Nikon labophot-2 Microscope

 

     This is what you actually receive. One Digital camera 5.0 Mega pixels with USB interface , 0.4x nosepiece at a diameter of 23.2 mm, 30 mm and 30.5 mm microscope adapter for microscopes which have different a insertion diameters (shown in picture below), a 0.01 mm gradient for calibration, and a CD which contains the imaging software for video and still image capture, and instruction manual.

 

   The additional microscope adapter sleeves included slide on the male relay lens end (center of picture)  to give you a total of three sizes 23.2 mm  (no adapter used),30 mm, and 30.5 mm for insertion into 3 different diameter Trinocular camera ports.

 

   The calibration slide - 0.01mm line resolution, 0.07mm, 0.15mm, 0.6mm, 1.5mm circle resolution

 

    This is a 5 MP dedicated camera with 0.45x nosepiece attached to a labophot 2. The camera is blue which is the older model; yours will be white.  Most Optiphot, Apophot, Labophot,  and Alphaphot trinocular tubes are similar. Note the tube inside the 42mm diameter trinocular tube. It is a 23.2mm insertion tube. If your microscope has this tube inside you can also use the above adapter in the other microscope models listed. 

 

 

    Look down your V-T tube and you will see a nose adapter port for insertion of a 23.2 mm camera adapter. Many other microscopes have this port.  The Labophot contains the same inner insertion tube. Some SMZ-2T models have a 30mm insertion diameter which you can just slide on the adapter sleeve included with this sale.  

 

   Dedicated camera attached to an Apophot Microscope.  Camera and nosepiece attaches the same way as the Optiphot microscope.

 

    This is a fixed V-T tube found on an Apophot. Most Optiphot, Labophot,  or Alphaphot trinocular tubes are similar. Notice the tube inside the 42mm diameter trinocular tube. It is a 23.2mm insertion tube. If your microscope has this tube inside you can use the above adapter.  

 

 

    Nikon Inverted with similar V-T tube.

5 MP Camera specifications

Camera

ISH500

Sensor

Micron MT9P031

Color/Monochrome

Color

Sensor size

1/1.25*

Pixel size (μm)

2.2x2.2

Effective pixels

5.0MP

Max Resolution (HxV)

2592x1944

Scan Mode

Progressive

Shutter

Rolling shutter

Frame Rate

 5 fps (2592 x 1944 Full Frame)
21fps (1280x960)
25 fps (1024 x 768)
38fps (640 x 480)

Color depth

24 bit

A/D

8 bit

Exposure Control

Auto/Manual

Integration Time (S)

0.001-0.8

White Balance

Manual/Auto

Dynamic Range

60dB

Operating temperature

0 to  60 degrees C

Cooling

--

Operating humidity

45% - 85%

Storage temperature

-20 to 70 degrees C

Cooling temperature

--

Operating system

Windows/links/Mac

Optical port

C-Mount

Data interface

USB2.0/480Mb/s

 

  The screen is displaying the I See Capture software from this microscope.

 

Other microscopes that can work with this configuration

AO with Trinocular Tube #1044
Meiji ML Series has standard 23mm ID
Nikon Eclipse with "Chimney" phototube with recessed 30mm ID port.
Nikon Optiphot / Labophot "chimney" type phototube with recessed 23mm ID port.
Nikon SMZ-2 ( best to use 1.0x nose adapter )
Zeiss Standard with 23mm ID / 25mm OD phototube.

 

fixedTo view my other current auctions now  click here. 

 

 Nikon Labophot 2 Microscope camera kit 5MP w nosepiece

Nikon labophot 2 Microscope camera  5.0 MP & 0.45x lens Apophot Optiphot Alphaphot

 DSLR SLR CAMERAS F-mount C-Mount adapter Kit single lens reflex digital