 |
| NEW LATEST VERSION |
Atlas DCA Semiconductor Analyzer Model DCA55
Fast Shipping with Tracking
Factory Warranty
|
|
|
|
- New Ultra high contrast green-mode display.
- New smart panel design.
- New Premium probes | | | |
The Peak Atlas DCA
A fresh approach to component analysis has resulted in the fantastic Peak Atlas DCA, an intelligent, slim and invaluable tool. A world of detailed component data has never been so accessible.
Just connect your component any way round and press the test button. The Atlas DCA will then present you with detailed component information in concise, easy to read, scrollable pages. The displayed information will include: the component type, special component features, component pin out, and measured parameters (such as gain, leakage current, gate threshold voltages, volt drops etc...). No more searching through data books and catalogs in order to identify components and pin outs, the Atlas does it all. | |
Analysis Portfolio
It doesn't matter how you connect the test clips to the component, the Atlas can analyze a vast number of different component types including bipolar transistors, enhancement mode MOSFETs, depletion mode MOSFETs, Junction FETs (only gate pin identified), low power thyristors and triacs (less than 5mA trigger and hold), diodes, multiple diode networks, LEDs, bi-colour and tri-colour LEDs. It will even identify special component features such as diode protection and shunt resistors in transistors. For two-leaded components such as diodes and LEDs, any pair of test clips can be applied to the component any way round, the Atlas DCA sorts it all out for you. |
|
|
|
Simplicity
There is no on/off switch, power is automatically turned on at the start of an analysis and then automatically turned off if inactive for more than 30 seconds. Each page of displayed information is presented in manageable amounts, with each page being displayed when you want it. If you want to concentrate on the "pin out" page then just select that page, you don't have to see information that you don't need.
The Atlas DCA Package
The Peak Atlas DCA is supplied complete with a long life battery, universal test probes and a comprehensive illustrated user guide. Furthermore, free and unlimited technical support and advice is available to all users by telephone, fax, email or our web site. |
|
| Parameters |
Minimum |
Typical |
Maximum |
Notes |
| Peak test current into S/C |
-5.5mA |
|
5.5mA |
1 |
| Peak test voltage across O/C |
-5.1V |
|
5.1V |
1 |
| Measurable transistor gain range (HFE) |
4 |
|
65,000 |
2 |
| Transistor gain accuracy |
-3%-5 HFE |
|
+3%+5 HFE |
2,9 |
| Transistor VCEO |
2.0V |
|
3.0V |
2 |
| Transistor VBE accuracy |
-2%-20mV |
|
+2%+20mV |
9 |
| VBE threshold for Darlington identification |
|
0.9V |
|
3 |
| VBE threshold for Darlington identification (shunted) |
|
0.8V |
|
4 |
| Acceptable transistor VBE |
|
|
1.8V |
|
| Base-emitter shunt resistance threshold |
|
60k |
|
|
| Transistor collector-emitter test current |
2.45mA |
2.50mA |
2.55mA |
|
| Acceptable transistor collector leakage |
|
1.0mA |
|
6 |
| MOSFET gate threshold range |
0.1V |
|
5.0V |
5 |
| MOSFET gate threshold accuracy |
-2%-20mV |
|
+2%-20mV |
5 |
| MOSFET drain-source test current |
2.45mA |
2.50mA |
2.55mA | | |
| MOSFET minimum acceptable gate resistance |
|
8k |
|
|
| Thyristor/Triac gate test current |
|
4.5mA |
|
7 |
| Thyristor/Triac load test current |
|
5mA |
|
|
| Diode test current |
|
|
5mA |
|
| Diode forward voltage accuracy |
-2%-2mV |
|
+2%+2mV |
|
| VF threshold for LED |
|
1.50V |
|
|
| Short circuit detection threshold |
|
10 ohms |
|
|
| Battery type |
GP23A 12V Alkaline |
| Battery voltage range |
7.50V |
12V |
|
|
| Battery voltage warning threshold |
|
8.25V |
|
|
| Inactivity power-down period |
|
30 secs |
|
|
| Dimensions (excluding test leads) |
103 x 70 x 20 mm |
| Operating temperature range |
0°C |
|
50°C |
8 |
- Between any pair of test clips.
- Collector current of 2.50mA.
- Resistance across reverse biased base-emitter > 60k.
- Resistance across reverse biased base-emitter < 60k.
- Drain-source current of 2.50mA.
- Collector-Emitter voltage of 5V.
- Thyristor quadrant 1, Triac quadrants I and III.
- Subject to acceptable LCD visibility.
- BJT with no shunt resistors.
Example screen-shots for a typical transistor: |
 |
Shipping Terms - USA
Every item will be send to Paypal address only; it is buyers responsibility to correct all problems with shipping address.
Shipping cost include Insurance,
shipping and packing charges. Before asking about shipping cost please
check UPS store shipping and packing charges including prices for boxes
and packing materials.
Shipping is via USPS or UPS Ground. UPS does not ship to P.O. Boxes, APO or FPO addresses.
Please be aware that we observe most
national holidays and therefore you may see a slight delay in
processing your orders around holidays.
Most orders will ship within 1 business day after payment is received. Shipping Terms - CANADA & International
Any questions
about shipping please ask before bidding. Brokerage fees and customs
charges into Canada and other countries are very expensive with any
carrier. We are not responsible for any of these fees, by bidding on
this auction you have legally agreed to pay for this items import into
Canada or other country. Please be aware that these fees are on top of
the shipping charges for the auction. Unfortunately they can not be
predicted prior to shipment. We are not responsible for any Customs
fees, please, check your country's Customs rules before bidding. Most
orders will ship within 2 business days after payment is received.
Shipping will be calculated based on buyer's location using eBay's built
in shipping calculator.
Every item will be send to Paypal address only; it is buyers responsibility to correct all problems with shipping address.
Shipping cost include Insurance,
shipping and packing charges. Before asking about shipping cost please
check UPS store shipping and packing charges including prices for boxes
and packing materials.
|
