FlyBy
Forte is a brand new technologically advanced windshield coating.
Development of Flyby Forte was heavily based on the latest and most
advanced mobile phone anti-scratch protection. Our inorganic Nano-tech
coating was specifically designed for EXTREME semi-permanent durability
and long-term resistance to abrasion and chemicals.
Flyby
Forte was tested to over 40,000 real time wiper cleaning cycles, is UV
stable, highly chemical resistant, and provides resistance to scratches
and minor chips.
Flyby Forte is the ULTIMATE in windscreen and glass coatings!
Unlike
traditional glass coatings, which attach to the surface, Forte fully
bonds by penetrating the top surface of glass, merging and transforming
it into a hydrophobic smooth surface.
Flyby
Forte does not allow chattering, wiper noise, or degradation of the
glass. Rain droplets slide off fast at speeds beyond 30mph for a minimum
of 6 months. Expected durability is up to 2 years.
Enhance your safety and superior vision in bad weather - Use Flyby Forte!
Specifications:
- Initial contact Angle (DIN EN 828) : 115 Degrees
- Water drop sliding angle: <20 deg.
- Extreme abrasion resistance
- No wiper judder or noise
- Repels water, dirt, dust, salt, ice, and snow
- Easy to apply
- Long lasting durable protection
- Harsh chemicals resistant (from 4~12 pH)
- Improves night vision
- Suitable for any glass type: Auto, Marine, Aviation, and more
Directions:
Note:
Avoid applying over rubber trim or to the paint. If product contacts
paint or rubber wipe off with wet mf towel immediately.
Always wear the correct safety equipment when using professional grade products, we would recommend minimum of nitrile gloves.
1) Polish the glass with CarPro Ceriglass, preferable by machine polisher, or polish very well by hand rayon block.
2) Clean surface free of oils with CarPro Eraser.
3) Pour a few drops over the supplied cotton pad
4) Apply in circular motion all over the glass and do not wipe off
5) Repeat steps 3 and 4
6)
Using the same applicator (but no additional Forte) once again repeat
step 4 buffing the FORTE in until the surface is dry and 100%
transparent and clear.
7) After
entire windshield is coated, apply Flyby Forte to the Wiper blades and
leave wipers off of the glass for at least 10 minutes.
8) For side windows only 1 layer is needed. Apply as above without repeating steps 3&4
9) Keep surface dry for 4 hours with no wiper blades for 24 hours.
Note:
FlyBy Forte may be layered further at your discretion for increased thickness and durability.
Some additional tips:
Preparation
of the glass is vital to performance and bonding of FORTE. We
recommend cleaning the glass with strong APC, followed by Iron X and if
sap, bugs or tar are present Tar X should also be used.
Dry
glass before polishing to minimise product sling, or cover adjacent
paintwork with microfibre towels or bodyshop plastic sheeting if machine
polishing the glass.
Using low tack masking tape to cover any window rubbers and surrounding paint.
Thoroughly
polish the window using Ceriglass and a rayon block or pad, a machine
polisher is preferable at this stage as it's quicker than hand polishing
to get the same result.
Once
the glass is perfectly clean and smooth, clean the surface well with
CarPro Eraser and clean microfibre or terry towels. Ensuring the glass
is fully dry before applying forte as per above instructions.
Maintenance:
If
Forte beading begins to slow, clean surface well with Eraser and
IronX/TarX if required. This may be needed every 2-3 months.
Kit Includes:
1 x 15ml FORTE bottle
5 x Cotton Pads
1 x CarPro Suede Cloth
1 x 50ml Eraser
1 x 50ml Ceri Glass
1 x Rayon Hand Polish Block