TP-Link Network CPE210
2.4GHz 300Mbps 9dBi Outdoor
TP-LINKs 2.4GHz 300Mbps 9dBi Outdoor CPE, the CPE210 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE210 an ideal choice for both business and home users.
Enterprise Hardware Design
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE210 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30 (-22) to +70 (158).
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna and dedicated metal reflection ensures higher gain and lower noise interference.
High Power High Sensitivity
In advanced, high power Tx (up to 27dBm/500mw) and high sensitivity Rx (up to -95dBm) radio front-end design breaks down the barriers of traditional Wi-Fi transmission range, making CPE210 an ideal product for outdoor wireless networking applications.
SPECIFICATIONS:
Processor:
Qualcomm Atheros 560MHz CPU, MIPS 74Kc
Memory:
64MB DDR2 RAM, 8MB Flash
Interface:
1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)
1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)
1 Grounding Terminal
1 Reset Button
Antenna Type:
Built-in 9dBi
2x2 Dual-polarized Directional Antenna
Beam Width:
65 (H-Plane) / 35 (E-Plane)
Note:
For more details, please refer to datasheet
Protection:
15KV ESD Protection
6000V Lightning Protection
Power Consumption:
10.5 Watts Max
Note: When deployed using Passive PoE, the power drawn from the power source will be higher by some amount depending on the length of the connecting cable.
Power Supply:
Passive Power over Ethernet via LAN0 (+4,5pins -7,8pins)
Voltage range:
16-27VDC
Enclosure:
Outdoor ASA stabilized plastic material
IPX5 waterproof Certification
Wireless Standards:
IEEE 802.11b/g/n
(with Pharos MAXtream disabled)
Proprietary Protocol:
TDMA Mode
(with Pharos MAXtream enabled)
Wireless Speeds:
Up to 300Mbps (40MHz,Dynamic)
Up to 144.4Mbps (20MHz,Dynamic)
Up to 72.2Mbps (10MHz,Dynamic)
Up to 36.1Mbps (5MHz,Dynamic)
Frequency:
2.4-2.483GHz
Note: Available operating frequency may
vary depending on the limitations of
the countries or regions in which the
device is used.
Reception Sensitivity:
802.11b:
11M: -95dBm, 5.5M: -96dBm,
2M: -96dBm, 1M: -96dBm
802.11g:
54M: -79dBm, 48M: -80dBm,
36M: -84dBm, 6-24M: -88dBm
802.11n:
MCS15: -76dBm, MCS14: -78dBm,
MCS13: -80dBm,
MCS12: -84dBm, MCS11: -87dBm,
MCS10: -91dBm,
MCS9: -93dBm, MCS8: -96dBm,
MCS7: -76dBm,
MCS6: -78dBm, MCS5: -80dBm,
MCS4: -84dBm,
MCS3: -87dBm, MCS2: -91dBm,
MCS1: -93dBm, MCS0: -96dBm
Transmission Power:
27dBm/500mw
(Adjustable power by 1dBm)
Note: Maximum transmission power
may vary across different channels
depending on the limitations of the
countries or regions in which the device
is used.
Wireless Configurations:
Pharos MAXtream TDMA Technology
802.11b/g/n Modes
Selectable Channel Width:
5/10/20/40MHz
Automatic Channel Selection
Transmission Power Control
Dynamic Frequency Selection (DFS)
WDS Enable/Disable
Security:
WPA/WPA2,
WPA-PSK/WPA2-PSK
(AES/TKIP) Encryption,
64/128/152-bit WEP Encryption
SSID Broadcast Enable/Disable
Multi-SSID with VLAN Tagging
(AP mode only)
Distance/ACK Timeout Setting
Wireless MAC Address Filter
Wireless Advanced:
> Beacon Interval/RTS Threshold/
Fragmentation
>Threshold/DTIM Interval/
AP Isolation/Short GI/Wi-Fi Multimedia
Management:
Discovery and Remote Management via
Pharos Control application
HTTP/HTTPS Web-based management
System Log
SNMP Agent(v2c)
Ping Watch Dog
Dynamic DDNS
SSH Server
Wireless Signal Quality Indicators:
Signal Strength/Noise/Transmit CCQ/
CPU/Memory
Monitors:
Throughput/Stations/Interfaces/ARP/
Routes/WAN/DHCP
Spectrum Analyzer
Speed Test
Ping
Traceroute
System-level Optimizations:
Optimized IGMP Snooping/
Proxy for multicast applications
Hardware watch dog
Certification:
CE, FCC, RoHS, IPX5
Package Contents:
Outdoor Wireless CPE
24V 1A Passive PoE Adapter
Pole Mounting Straps
AC Power Cord
Installation Guide
System Requirements:
Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux.
Note: We recommend you to use one of following Web browsers for an improved user experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.
Button:
Remote Reset Button
Certifications:
CE/FCC/UL/IC/GS/PSB/
C-tick/SAA/S-Mark/KC-mark
Efficiency:
>80%
Input:
100-240VAC, 50/60Hz
Input Current:
0.8A Max at 100VAC
Input Voltage:
100VA-240VAC at 50Hz-60Hz
Interfaces:
1 AC Jack with Earth Ground
1 10/100Mbps Shielded Ethernet Port (Power + Data)
1 10/100Mbps Shielded Ethernet Port (Data)
Output:
24VDC, 1.0A Max +4,
5pins -7, 8pins.
(Support up to 60m Power over Ethernet)
Output Voltage:
24VDC(+4,5pins -7,8pins)
Power Status LEDs:
0-0.8A: Green
0.8A-1.0A: Red
Item Dimension (L"xW"xH"):
10.63 x 5.20 x 4.17
Weight: 1.85 lb
Warranty: 2 years
Sealed | The item is in its original retail package and has never been opened. |
New | The item is new and doesn't show any handling signs. |
Used | The item is in perfect working condition. |
Refurbished | The item was refurbished by the manufacturer. |
Salvage | The item may or may not Power On or there could be minor or major damages that prevent The Items functionality. |