Digital Plus by Lenz

NMRA DCC Products

Unleashing the Power Of DCC! Lenz Elektronik GmbH, the world's leader for Digital Command Control, is celebrating their 26th year in business. 

They have manufactured DCC products for a number of fine model railroad companies including ROCO, LGB, Con-Cor & Atlas. Lenz GmbH also produces, Digital plus.

Their flagship line of Digital Command Control equipment for model railroads. 

Their products are carried by fine hobby stores worldwide. Their goal is to produce products with exceptional quality, value, & performance, while maintaining true compatibility.

Lenz DCC LV101 POWER SUPPLY STATION

(EXCELLENT FOR POWERING PROGRAMMING TRACK)
Description:

The LV101 power station:

The Digital plus LV101 Power Stat
ion is the power station of
choice for most
Digital plus by Lenz users. Features include 8
user settable DCC track voltages to allow for the user to customize
the operation of the LV101 to their individual needs, a fault detection LED
to assist the user in troubleshooting problems,
and a RJ-45 plug-in I/O port.
This I/O port is provided for use with
Set-02 or for providing additional XpressNet power.
The DIGITAL plus Power Station
LV101 provides clean and safe
DCC power to the track. New circuitry has been developed to
reduce noise, which provides
exceptionally clean power to operate
your DCC equipped trains.

Safety features include:
Both short and overload detection that turns off the power to
the track whenever a short or overload condition is detected.
This protects both your trains and the LV101 electronics.
Opto-isolation to safely isolate your power station interface
wiring from your track wiring. This eliminates any possibility
for hidden ground loops through your power station.
Fail Safe runaway protection isprovided by requiring a 7 volt
signal on the DCC Control Bus (the C and D wires). This
prevents the LV101 from accidentally sending out power to
the track when the command station stops transmitting packet.

The LV101 has a fault detection LED located on the front of the
unit. When the power station is in use, the LED on the front is lit.
If the power is on but no information is being received over the
Power Station Interface (connections C and D), the LED will blink.
The LED will also blink when the LV101 has detected a short or
experienced a thermal overload.
The LV101 Power Station was designed to meet all NMRA
Standards and RPs including the new proposed NMRA Power Station Interface RP.
This allows maximum interchangeability for use with other conforming NRM
A DCC systems.
The LV101 was submitted to the NMRA along with the LZ100 for full conformance
testing and has received an NMRA C&I Warrant.

If you are a MRR Lenz USER and you do not see a listing for a Lenz Module you want to buy, Ask Us!  We have a large Lenz Inventory!

Emmetshouse is the EBAY LENZ OUTLET.

ASK US ABOUT REPAIRS, REPLACE & UPGRADES.

░░Now That LENZUSA is out of Business, Emmesthouse is ready to fill the gap for MRR Lenz Users,

Who need Lenz Items or need Lenz Items repaired or upgraded.░░