BMW INPA / Ediabas OBD & ADS Interface


This Interface allows FULL diagnostic of ALL BMW's equipped with OBD1 20pin connectors as well as ALL BMW's equipped with 16pin OBD2 connectors that do not require DCAN yet.

Works with INPA, SSS, Progman and other Ediabas Handler based Software.

The smallest, best looking & highest quality of it's kind.

Dual mode diagnostic interface for BMW Ediabas / INPA Software 100% compatible with the original BMW OBD2 Interface and all it's functions in OBD mode, 100% compatible ADS mode for full support of 20pin OBD1 cars such as the E30 - E36 series and similar. Only an fully ADS compatible interface can access all modules in certain 20pin OBD1 cars, to check if you have such a car please check the 20pin OBD1 diagnostic plug, if Pin15 is installed only an fully ADS compatible Interface will be able to connect to all modules in the car.

Functions:
- Read & erase errors
- Adaptations
- Coding

- Reprogramming
- And others...

Features:
- Connects to RS232 (COM Port) by a 1:1 male to female extension cable (NOT included)
- Status LEDs for mode and Ignition status
- Electronic mode selection OBD2 or ADS mode by push buttons
- Double K-Line support by two freescale semi MC33290 K-Line Drivers and PLD
- Battery voltage detection by RS232 control line (See Screenshot)
- Ignition voltage detection by RS232 control line (See Screenshot)

Package contains:
INPA / Ediabas OBD & ADS RS232 Interface - 1 pcs.
BMW 20pin OBD1 to OBD2 female adapter cable - 1 pcs.

Please be aware that we do not include software for this Item neither on disc nor by download

For a General Introduction into diagnostic on BMW vehicles please download / open and read this PDF document carefully:
General_Introduction.pdf

 

F.A.Q:

Q: How does this Interface work?
A: It can be setup as STD:OBD2 Interface in OBD2 mode or as ADS in ADS mode.

Q: I have seen other auctions from other vendors for a higher / lower price, what's the difference ?
A: Usually the price and the quality - Since our Interfaces are assembled and tested to the highest quality standards, It's up to you (the customer) to compare price, product and terms and make your decision according to that.

Q: I have an older BMW that have an 20pin OBD1 connector under the hood, is that the right interface for it?
A: Yes, this Interface is the perfect choice for 20pin OBD1 vehicles - only with this interface all modules are accessible in certain 20pin OBD1 vehicles.

Q: I have an newer BMW that have an 16pin OBD2 plug inside the vehicle compartment, is that the right Interface for it?
A: As long as that BMW does not require DCAN yet you can use this Interface in OBD2 mode and it will cover all functions, however we also have to be honest and tell you that there is a cheaper alternative - the simple Interface we offer for 29USD in another auction can do the same job on such vehicles.

Q: Can't I simply use the cheaper OBD2 interface sold by you and many other sellers together with some adapter cable for my 20pin OBD1 vehicle?
A: You can, however if your 20pin OBD1 vehicle requires real ADS mode not all modules will be accessible.

Q: How do I know if my 20pin OBD1 vehicle requires an real ADS Interface?
A: Check the 20pin OBD1 connector under the hood of your vehicle, if pin15 is installed you will need an real ADS Interface to access all modules. ( For more information about this please scroll down to "Choosing the right Interface" )

Q: My PC does not have an RS232 com port, can I use an USB to RS232 converter cable?
A: In OBD2 mode this might work in most cases depending on the chipset used in the conveter cable, however in ADS mode it won't work, alternative working choices are certain (but not all) PCMCIA and PCI Express to RS232 cards.

Q: How much is the shipping to my destination?
A: Worldwide shipping by Airmail is FREE of charge, however if you require courier service such as DHL there will be a surcharge depedning on the weight and your destination.

If you did not find an answer to your product related question - please feel free to contact us and we will reply you as soon as possible to the extend of our knowledge.

Limited stock ! "first come, first served"


Payment

We accept PayPal only. We ship within 2 business days of receiving payment.

Serious buyers only, please. Orders will be cancelled and an unpaid item dispute filed if payment is not received within 10 days of purchase.


Shipping

FREE worldwide shipping by Hong Kong Post ( registered airmail with tracking number )


Returns
  • We stand behind every product we sell. If you're not pleased with your purchase, we'll be happy to make an exchange or refund the product price less S&H within 7 days of your purchase.
  • For any exchange or refund, we need the original receipt or a record of the purchase in our system, and the product must be in its original condition, including packaging and all accessories.
  • Please allow up to 7 business days for returns to be processed.
  • Shipping and handling charges are not refundable.
About Us

InnovOBD Technology Ltd. has a long and in-depth experience with special diagnostic equipment as well as many other electronic devices and systems, our main priority in any business is a 100% satisfied customer, we have a european management and R&D department but are based in greater China for cost advantages (which we pass on directly to you), however we never compromise our products quality, try us - you won't regret it.



eBay Cross Border Trade powered by MerchantRun GlobalLink