Package Includes:
GT45 22PC TURBO CHARGER KIT MANIFOLD+OIL FEED LINE CHEVY SMALL BLOCK SBC CAMARO
Package Includes:
1 XGT45 Turbocharger 1 X Stainless Steel Top-Mount Turbo Manifold 1 X 35mm/ 38mm Wastegate with Spring 1 X Braided Oil Feed Line 1 X GT45 V-Band Downpipe Flange 1 X Aluminum Intercooler 1 X 8-Piece Piping Set 1 X Aluminum Blow Off Valve 1 X Aluminum 2.5" Flange Pipe 1 X 3" Round Air Filter 1 X Turbo Boost Controller 1 X Box Style Turbo Timer 1 X Fuel Pressure Regulator 1 X Braided Oil Return Drain Line 1 X Turbo Boost Gauge 1 X Oil Temperature Gauge 1 X Water Temperature Gauge 1 X Voltage Stabilizer 1 X Copper Ground Wire Kit 1 X Oil Catch Tank 1 X Oil Filter Relocation and Oil Line Kits 1 X 10-Row 10 AN Oil CoolerHardware, such as Gasket(s) and Bolt(s), if Shown in the Picture Above8-Piece Piping Set Includes: 2 X 180 Degree U-Pipe 2 X 90 Degree Pipe 2 X 45 Degree Pipe 2 X Straight PipeApplication: 66-75 Chevrolet Bel Air 5.7/ 6.6/ 7.4L V8 66-72 Chevrolet Biscayne 5.7/ 6.6/ 7.4L V8 1973 Chevrolet Blazer 5.0/ 5.7/ 7.4L V8 1973 Chevrolet Brookwood 5.7/ 6.6L V8 68-75 Chevrolet C-10/ Pickup/ Suburban 5.0/ 5.4/ 5.7/ 6.5/ 6.6/ 7.4L V8 90-93 Chevrolet C-1500 4.3/ 5.0/ 5.4/ 6.2/ 7.4L V8 68-75 Chevrolet C-20/ Pickup/ Suburban 5.0/ 5.4/ 5.7/ 6.5/ 6.6/ 7.4L V8 91-95 Chevrolet C-2500/ Suburban All V8 Models 1975 Chevy C30 73-75 Chevrolet C30 Pickup All Models 88-95 Chevrolet C3500 All Models 67-72 Chevrolet Camaro All Models 66-75 Chevrolet Caprice All Models 67-73 Chevrolet Chevelle All Models 1968 Chevrolet Chevy II All Models 66-74 Chevrolet El Camino All Models and More
(ALL Models Above with SBC V8 GAS Single Turbocharged Engine ONLY)
*No instruction included and Modification such as welding may be needed
Professional Installation is highly recommended
*Items Color May Vary Depends on Inventory
*The Installed Kit Picture (Right Bottom Corner) is a sample only, may not same as the one you purchaseHigh Compression/ Boosting GT45 Oversize TurbochargerSpecifics and Benefits:
Capable of Boosting Horse Power up to 600+ BHP High Quality Material, Cast Housing with Durable Steel
| Exhaust (Turbo Manifold) Flange: | Standard T4 4-Bolt | | Exhaust (Downpipe) Flange: | Standard 3.25" Inner Diameter V-Band | | Intake Inlet/ Outlet: | 3.75"/ 2.25" |
Compressor: | Trim: | 69 | | A/R: | .66 | | Inducer: | 68.70 | | Exducer: | 97.80 |
Turbine: | Trim: | 92 | | A/R: | 1.05 | | Inducer: | 87.4 | | Exducer: | 77.00 |
Stainless Steel Exhaust Tubro ManifoldFeatures and Benefits: High Performance Tubular Turbo Racing Design Made of High Quality T-304 Polished Stainless Steel Alloy Material for Strength and Durability Tubular Design to Ensure Equivalent Exhaust Flow Rate from each Cylinder Computerized Mandrel-Bended to Maximize Air Flow Smoothness TIG Welded CNC Machined Flange for Resistance against Cracking and Wearing Increase Engine Exhaust Output and Efficiency 38mm/ 35mm External Wastegate Port and Flange Included Standard T4 (T04) Configuration Outlet
35mm/ 38mm Wastegate with Spring Specifics and Benefits: High Strength Cast Steel Body with Steel Head Comes with 8-PSI Spring Installed 35mm or 38mm Wastegate Dump Pipe Flange
Stainless Steel Braided Oil Feed LineSpecifics and Benefits: Made of High Quality Stainless Steel Hose Stainless Steel Braided Hose 10AN Fittings Anodized Ends Inner Diameter: 0.25" Length: 36.00" 1/8 NPT Fittings Natural Polish Finish GT45 V-Band Clamp FlangeFeatures and Benefits: Made of High Quality T-304 Mild Steel Durable Material CNC Machined Stainless Steel Flange Inlet Flange Inner Diameter: 3.25" Overall Clamp Width: 4.50" Direct Bolt-On, High Performance Use Universally Fits GT45 Turbochargers
Aluminum IntercoolerFeatures and Benefits: Made of High Quality T-6061 Aluminum Durable Material Helps Reducing Engine Inlet Temperature High Performance Bar and Plate Turbo Racing Design Allow More Horsepower at the Same Boost Level and Even More Power at the Higher Boost Level Intercooler Size: 31.00" (L) X 12.00" (H) X 3.25"(W) Core Size: 24.00" (L) X 12.00" (H) X 3.25"(W) Inlet/ Outlet : 2.25"/ 2.25” Inlet/ Outlet Inner Diameter: 3.00"/3.00”
8-Piece Aluminum Piping KitFeatures and Benefits: Made of High quality T-6061 Lightweight Aluminum Piping Increase 65% Air Flow Comparing with other Standard Piping 3.00" Piping Diameter Polished Surface Finish
Aluminum Blow Off ValveFeatures and Benefits: Billet Aluminum, Anodized Finish Body Draw In Surrounding Air and Release a Unique Discharge Sound 40mm, Hard-Anodized Valve for Increased Airflow High-Quality Diaphragm and Short Stroke Significantly Increase Response Dual Spring System Promoted Response and Allows for High Boost Pressures 2 Bolt Mounting Design Holds Up to 30 PSI Boost Pressure Aggressive JDM Discharge Sound
Aluminum 2.5" Flange PipeFeatures and Benefits: Fits Type-S/Type-RS Dump Pipe Flange Construction Prevents Warping due To High Heat Made of High Quality T-6061 Aluminum, Lightweight Design 2.50" Pipe Size
3” Round Tapered Cone Air FilterFeatures and Benefits: Made of Reinforced Material and Covered with Chromed Finish for Lightweight and Durability 3" Filter Inlet, 3" Inner Diameter Pipe, 6" Overall Height Performance: Improves Up to 95% Filtration Efficiency Micro Cotton Gauze Type Filter Material, Washable with Water or Soap, and Reusable Worm Gear C-Clamp Included For Intakes or Turbo Usages
Turbo Boost ControllerFeatures and Benefits: CNC Machined Aluminum Anodized Finish Body 1-30 PSI Adjustable
Box Style Turbo TimerFeatures and Benefits: Allows the vehicle to idle the engine, for the timed period, with the ignition key removed Universal for all manual & automatic transmission vehicles both turbo-charged or non turbo-charged. Auto Mode - Precise calculation of cool down period to ensure proper cool down of turbo-charged engine. Digital display - Allowing you to see during day & night time
Fuel Pressure RegulatorFeatures and Benefits: Adjustable from (1-15) psi to (140) maximum fuel pump capacity Fuel pressure regulator can deliver vehicles’ highest performance, with long life and high reliable operation Adjustable fuel pressure regulator with 1:1 ratio CNC machined light weight Comes with hose and bolts install kit
Stainless Steel Braided Oil Return Drain LineSpecifics and Benefits: Made of high quality CNC Steel & AluminumImprove turbo performance by draining excessive oil, and can recycle oil back to the turbo 10AN Fittings, 17" Length Inner Diameter: 0.50"
2" Smoke-Tinted Turbo Boost GaugeFeatures and Benefits: Smoke TINT Screen Red LED illuminated needle 2” Gauge Diameter Mounting kit and hardware included
2" Smoke-Tinted Oil Temperature GaugeFeatures and Benefits: Smoke TINT Screen Red LED illuminated needle Measures from 0 - 150 Degree Celsius 2” Gauge Diameter Mounting kit and hardware included
2" Smoke-Tinted Water Temperature GaugeFeatures and Benefits: Smoke TINT Screen Red LED illuminated needle Measures Water Temperature from 0 - 150 Degree Celsius 2” Gauge Diameter Mounting kit and hardware included
Voltage StabilizerFeatures and Benefits: Improves Ignition Flow and Strengthens Starting Power Stabilizes Voltage, Improves Engine Performance Better Throttle Response Improve Audio Quality Improve Fuel Efficiency Increase Headlight Brightness Virtually Increases Horse Power and Torque Longer Battery Life Time Specially Designed with High Water and Heat Resistance
High Conductivity Copper Ground WireFeatures and Benefits: Made with High Quality Copper Material for Maximum Conductivity High Quality Plastic Wrapped for Preventing Power Loss, Lowering any Electrical Resistance
i.e.Increase the Effectiveness of the Entire Electronic System. Design for Centralizing the Grounding Point of the Electrical Circuit of Vehicles. Essential especially for Any Vehicle with Engine Swaps since Grounding Tends to be an Issue with Performance Modifications. 1 X 25.00" (Overall Length) Ground Wire; with 24.50" (Distance of the 2 Centers of Connection Terminals) 2 X 33.00" (Overall Length) Ground Wire; with 32.50" (Distance of the 2 Centers of Connection Terminals) 2 X 40.50" (Overall Length) Ground Wire; with 40.00" (Distance of the 2 Centers of Connection Terminals) Mounting Kits Included
Oil Catch TankFeatures and Benefits: TIG Welded T-6061 Light-Weight Aluminum Construction Light-Weight Filter Tank Design for Racing Applications Clear Tube Indicator for Easy Visual of Checking if the Tank is Full Ensure Better Mileage, Better Performance and Preserve Engine Life Catch Oil and Sludge to Save the Life of the Engine
Oil Filter Relocation and Oil Line KitsFeatures and Benefits: Made of High Quality Lightweight Aluminum with CNC Laser Cut Allows Installation of Larger Oil Filter Increases Engine Oil Capacity Available; thus, Enhances Oil Lubrication and Protection of Engines Oil Filter Relocation for Easier Access and Oil Change; a Must for Hard-To-Reach Oil Filters 10-AN Male Fitting and 0.875” x 12.125” Bolt Pattern Quality Stainless Steel Braided for Strong Reinforcement of Strength and Durability Inner Hose Material: CPE Synthetic Material Tubing Maximized Resistance to Heat, Corrosion and Abrasion Woven (Mechanism) Construction for Enhancing Flexibility
Universal 10-Row 10 AN Oil CoolerFeatures and Benefits: Usable to Cool Down Engine Oil, Transmission, and Rear-Differentials Made with High Quality T-6061 Aluminum Powder-Coated and Oxidized for Durability and Protection Excellent for Modified Street Vehicles, which are Driven Hardly with Minimal Track Use Potentially Reduces Oil Temperature up to 50°F Helps Reducing Coolant Temperature Extends Engine Life Overall Size: 13.50" x 6.50" x 2.00" Core Size: 9.00" x 5.50" x 2.00" Inlet / Outlet Size: 10 AN
TBK-22PC-GT45+TM-CS-S-T4-38
| DOMESTIC LOWER 48 US STATES: |
Free Shipping |
| AK / HI / PO BOX: |
299.98 |
| CANADA: |
299.98 |
| REST OF THE WORLD: |
798.98 |
| SALES TAX: |
CA ONLY |
|
Important Notice:
Please input your correct shipping address during checkout. We are not responsible for incorrect or undeliverable addresses. Not all of our items can be delivered to a P. O. Box. If your shipping address is a P. O. Box, please verify with the carriers or contact us prior to your purchase. Shipment will be held until a valid shipping address has been confirmed.
Very Important Shipping Policy:
We can only ship to the address that has been confirmed on your PayPal account. If you have other shipping address/addresses, please be sure you add to your PayPal account as confirmed address/addresses. Expenses of reshipping or rerouting for incorrect or undeliverable addresses would be buyers' responsiblity.
No refund will be issued if an invalid or undeliverable address has been provided to us.
Domestic Shipping rates apply to all 48 contiguous United States.
AK, HI, PR and PO BOX shipping rates are the same as CANADA Shipping.
For Canada shipping please select the lowest price. We do not offer expedited shipping.
Shipping Time:
Items will be shipped as soon as possible after payment has been cleared except for weekends and holidays. Please understand that we have no control over carriers' transit time.
International Shipping:
International buyers are responsible for possible customs fees, brokerage fees or duty fees. We would appreciate for understanding of tracking number would not be updated in between the city of departing in the U.S. and the city of destination.
US Territories and Military such as GU, VI, SAIPAN, APO/FPO and Virgin Island are not included in the 48 Contiguous States. We would not ship to such destinations, and all transaction will be canceled.
Shipping Method:
We reserved the right to choose a different shipping method depending on the size and weight of your purchased item(s).
NOTE: We are not responsible for any changed of address after item has been shipped. |
|
Return Policy:
- 14 Days money back, please notify us within 14 days after you've received your purchased item.
- All return requests must be submitted through your eBay account.
- You have to obtain a RMA (Return Merchandise Authorization) number from us, and have the RMA number written on the return package.
- Buyers pay for return shipping fee.
- Items to be returned must be in resalable condition.
- All returns are for refund ONLY. No exchange accepted.
- Returns for refund are subject to a 20% restocking fee.
Other Terms and Conditions:
- For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing.
- All items do not come with installation instruction unless otherwise specified.
- If item is questionable, please consult your local professional/mechanic before making purchase.
|
|
Notes:
Features and Benefits:
Instructions not included with most of our products.
CRC highly recommends professional installation on our performance parts.
