Description:
Reach the light inside!! AVRT5 is developed on the basis of the above aprs AVRTT-AVRT4 equipment, the main function is to transmit APRS data integration. Built-in GPS antenna and module + VHF radio transceiver module to TNC codec comprehensive plan. When it power on it can be decoded to work with the standard orientation can be issued after verification of aprs data. It’s compatible with common business APRS equipment and various aprsDIGI repeat and IGATE, it’s a real APRS machine including transmitting and receiving.
Attention:
1.
Please check the below
Shipping Service Description carefully before you purchase.
2.
In order to offer the best
service in eBay, we can provide return, replacement and fully refund in 60
days. Please contact via eBay message if you have any problem.
Feature:
1.
GPS module
SIRF4
module, high sensitivity, fast positioning, stable power.
2.
GPS antenna
18mm x 18mm
active GPS antenna, built-in LNA amplification, Star Search, locate quickly.
3.
AVR SCM
The AVR SCM
(Model mega 64), stable and reliable.
4.
VHF Module (1W)
The latest
1W VHF transceiver modules, small size, high stability for all types of
wireless data transmission.
5.
HF antenna
VHF
antennas are individually matched to send plants to ensure that the standing
wave emission and emission efficiency.
6. 3,300 mAh battery
Quality
lithium batteries by IMAX B6 0.6A charge and discharge, both are in 2900 -
around 3300 mAh. Boot continuous emission interval of about 20 seconds to work 24-36 hours. If the low-power or extend the transmission interval can work
continuously for more than 84 hours.
7. Built-
charge management IC (Input 5V)
Built-in
lithium red power management IC, avoid battery overshoot and over-discharge,
caring protect the battery. Charge current <400mA, operating voltage is
lower than 3.4V, automatic low -voltage protection shutdown.
8.
LED status display ( charging and transceiver
LCD)
Dual LED
display, red is charging indicator, when charging it’s red, full extinguished
or dimmed. Green is the GPS indicator: Flashing indicates that no location. If
it’s on it means success positioning.
9. Single
button (switches and transmitting)
Press
button long time – turn on. After startup, short press- transmitting, long
press-turn off
10.
18B20 temperature sensor (-40C ~ +99C)
Temperature
sensors; IC precision 0.0625 degrees, passes the temperature of inside/outside the machine
and the board in real time. (Need to measure the outside temperature can
lead)
11.
The buzzer ( beep )
Switch and
transmitter, there beep prompt, convenient to determine the state and blind
transfer machines.
12.
TF deck (record coordinate )
Internal device flash memory allow you to store your position history with second by second resolution. The
following support 4G TF card, FAT16 or FAT32 partition format, the file name is
automatically named according to the time saved in KML format. For example: at
18:20 on December 10, 2013 to start work positioning. File name : 12101820.KML
( May Day midnight, Greenwich Mean Time ). You can simply read stored position history via USB and export them back to NMEA sentences which can be visualized on-line in most internet map services.
13.
The wireless Bluetooth 2.0 module (Connecting
phone )
Built-in
Bluetooth module, the rate of 9600bps. Firstly it can real-time output aprs
decoded signal. Secondly Android phones can be connected to input signals KISS model TNC and control T5's transmitting. Specific functions can see the APP aprsdroid. Third, you can
use Android phones serial commands to configure settings VHF call sign and
frequency module.
For example: Set call
sign: AT + CALL = BG6QBV7
Set frequency: AT + FREQ = 144.6400
Set the buzzer: AT + BEEP = 1 ON AT + BEEP = 0 OFF
Setting Config:
Specifications:
AVRT5
|
Specification
|
GPS
|
Built-in SIRF4 GPS
module and antenna
|
RF Module
|
VHF Frequency
Seting 1Watt
|
RF Antenna
|
Handset Booster
Antenna
|
Memory
|
Support 4G TF
card(optional)
|
Thermometer
|
18B20 Sensor
|
MCU SCM
|
Mega64
Industrial
|
Output
|
USB
|
Bluetooth
|
Bluetooth
2.0(9600bps)
|
Buzzer
|
Beeper(can be
turned off)
|
Decoding
function
|
Decoder chip of
CML Inc.
|
Battery Capacity
|
3,300 mAh
|
Button
|
One button of
Power On/Off and TX
|
Interface
Extension
|
PCB 3 Analog
Interface
|
LED
|
Highlight Dual LED Indicator (Blue)
|
Package:
- 1 x SainSonic A510 APRS tracker
- 1 x USB data cable to PC
- 1 x VHF Antenna
- 1 x User Guide