Bigg Red Ltd
Specialist Brake Caliper Remanufacturer
Brake Calipers
Brake caliper repair kits
Brake caliper pistons
Caliper Slider bolts
Master cylinder seals
Bleed Screws, Pad pins and accessories
You are buying
A Brake Caliper slider Bolt kit
Enough components for 1 caliper
( Front ) to fit
Mazda MX5
NB Series 1800
1998 -2005
Only for models with larger 270mm discs
Make | Model | Type | Engine | From | To |
Mazda | MX5 | NB | 1800 | 1998 | 2005 |
Important Information
Each caliper uses 2 different slider bolts.One with a plain end, and
One with a cut-out for the Anti-Vibration rubber.
|
Plain Bolt |
Cut-out bolt |
Length tip to tip |
72mm |
72mm |
|
|
|
End 1 |
Plain |
Cut-out |
|
|
|
End 2 |
17mm Bolthead Internally threaded M8 X 1 |
17mm Bolthead Internally threaded M8 X 1 |
Kit contents
2 Slider bolts 1 of each type, plus 2 locking bolts, rubbers & grease.
Enough components to service 1 caliper
Customer information & satisfaction
Please note that our slider bolt/pin pictures are actual pictures.
This is what you will receive if you order, every component in the picture.
If it is not in the picture it will not come with your order
Sticking, sluggish or overheating caliper?
It may not be the caliper. Rusted & sticking slider pins/bolts will prevent the caliper from floating freely and can seriously effect your braking
Identification help
Due to motor manufacturers policy of fitting more than one make of caliper to the same vehicle
it may be necessary to confirm the make of caliper fitted to your vehicle.
All caliper manufacturers stamp there name into the casting on the reverse side to the piston. Obviously it
may be necessary to clean to make visable.
We always include the sizes of our pins and bolts for you to check against.
If in doubt as to the suitability of any bolt/pin or you also require slider rubbers, please contact customer services prior to purchase.
Please see contact details below
PayPal accepted
Bigg Red Ltd
Weir Lane
Worcester
WR2 4AY
Customer services;
Opening hours
Mon - Fri
9.30 - 5.30
We are a family owned specialist Brake Caliper remanufacturer offering a rebuild and bespoke coating service to over 3000 different calipers. If you prefer to do the job yourself, we have Thousands of Seals, Pistons, Bleed Screws & Slider Bolts on the shelf for immediate dispatch. Our dedicated and knowledgeable staff have many years of motor industry experience to help advise you through selection and fitting.
Paypal payment preferred but all major Credit/Debit cards are acceptable
Smaller components are sent Royal Mail first class, if ordered before 1pm ( Mon - Fri ) they will be collected by Royal Mail that same day. Larger components are sent via 24/48 hours carrier. This applies only to UK mainland excluding Highlands and Islands and excludes Sat/Sun. For all other destinations please contact customer service for price and delivery information, prior to purchase.
All items must be paid for in full prior to dispatch
We operate a no quibble returns system for all goods returned unused and in perfect condition within 2 months of purchase providing you have proof of purchase. Dirty, damaged and incomplete items will not be refunded and only the cost of the goods is refundable not the postage.