Included are the following kits required to build the The Toranado Precision Geared Extruder found on Thingiverse:

- Precision Gear and Shaft Kit
- Fastener Kit w/ PTFE Heat Isolation
- 2x 625zz Radial Bearing (ABEC#1 Rated)
- 1x MR685zz Radial Bearing (ABEC#1 Rated)
- 1x Black Oxide 5mm Shaft Collar

Note: Please allow 5-10 days handling

------------------------------------


Precision Gear and Shaft Kit Contains:
  • 1X 94T 48p Aluminum Main Gear w/ Set Screw
  • 1X 19T 48p Steel Motor Pinion w/ Set Screw
  • 1X Stainless Steel Precision Shaft - 5mm dia. 50mm length
  • 1X Stainlless Steel Precision Shaft - 5mm dia. 25mm length
  • 3X  #2-32 x 5/16" Self Tapping Screws
-------------------------------------

Fastener Kit Contents:
  • 3x Male JST 2W Connectors w/ 22AWG cut leads
  • 3x Female JST 2W Connectors w/ 22AWG cut leads
  • 2x M3x4 Knurl Nuts
  • 2x M3 Nyloc Hex Nuts
  • 5x M3 Hex Nuts
  • 3x M3x16 Stainless Steel Button-Head Screw
  • 1x M3x22 Stainless Steel Button-Head Screw
  • 4x M3x30 Stainless Steel Button-Head Screw
  • 1x M3x40 Stainless Steel Button-Head Screw
  • 6x 1/8" Bind Rivet Washers
  • 6x M3 PTFE Washers
  • 4x M3 Washers
  • 10x #4-20 x 3/4" Self-Tapping Screws
  • 1x #4-20 x 5/8" Self-Tapping Screw
  • 8x #2/32 x 5/16" Self-Tapping Screws
  • 14x #2/32 x 3/8" Self-Tapping Screws
  • 3x PTFE Tubing 5mmOD 3mmID ~9.25mm length
  • 1x PTFE Tubing 4mmOD 2mmID ~70mm length
  • 2x Idler Springs
-----------------------------

94T Gear Specs:

Material: 2010 Aluminum

Gear Dimensions:
O.D. = 2.000" (50.80mm)
P.D. = 1.9583" (49.74mm)
Bore Diameter = 5.0mm
Hub Diameter - 15.0mm
Face Width = 3.8mm
Length = 11.43mm

Center Bore Precision: Class G6/H6
TIR Precision: total composite error of .003" or less

-------------------------------------

19T Gear Specs:

Material: Steel

Gear Dimensions:
O.D. = .4375" (11.11mm)
P.D. = .3958" (10.05mm)
Bore Diameter = 5.0mm
Hub Diameter - 10.2mm
Face Width = 5.25mm
Length = 10.15mm