This Fine grade mitt has an abrasive strength equivalent to that of a medium grade clay bar.

I can assure you the material of this mitt is of superior quality, compared to some of the branded mitts on the market that are more expensive than this. It is hard to show this when selling on the internet but when you put this mitt against others, side by side, you can see and feel the difference in quality. The valeting/ detailing companies I supply in the UK and Europe also agree with this.

Want super smooth paintwork? Read on…

• A revolutionary alternative to the traditional clay bar. Faster, more effective and safer. Great for beginners and enthusiasts alike!
• The mitt measures 8.5" x 5.5" (21cm x 14cm with a Patented Advanced Polymer Rubber layer bond to one side.
• Thoroughly clean the surface of the car prior to use. This clay mitt is designed to remove embedded surface contaminants such as tar, brake dust and tree sap etc.
• Can be used with a water or pH neutral car shampoo (preferred) the vehicle paint and you can remove all surface embedded contamination faster and more effectively than a clay bar.
• Can be rinsed and re-used numerous times making it much more cost effective than a clay bar, in the long run.
• What's more, the clay mitt is not sticky or messy, if you drop it on the ground- don't worry about throwing it away because all you need to do is rinse it off well in water.

Instructions

1. Thoroughly wash the vehicle to remove all loose surface contamination. The clay mitt is designed to remove embedded contamination and used over a non washed surface will result in scratches to the paintwork.

2. Pre-soak the clay mitt in water prior to use. Using a suitable solution, we recommend a pH neutral car shampoo, start wetting the cars surface you want to remove contamination from with the plush side of the clay mitt.

3. Using the clay side, using very little pressure, pass the clay mitt over the wet surface. The clay mitt should be rinsed regularly to reduce the risk of removed contamination scratching the paintwork.

4. Thoroughly rinse the surface and use a fresh microfiber cloth or chamois to dry the area. The surface should be smooth to touch. This can be verified by placing your hand in a thin plastic bag and lightly running it over the surface!

Please Note:

- Claying is not a cure-all or a replacement for polishing. It's a tool for quickly and easily removing surface contamination.

- Do not use harsh detergents to clean the clay towel, a mild soap/shampoo and water solution is all that's needed.

- Do not use in direct sunlight or on surfaces over 145oF/62oC.

- To clean the Magic Clay Cloth, rinse with water and hang to dry. Do not leave to dry with the Polymer layer in contact with itself.

- The Magic Clay Cloth is not solvent resistant.

The Fine grade Clay Mitt is recommended for vehicles that are not heavily contaminated, and for those that are well maintained or clayed on a regular basis. For heavily contaminated vehicles, a Medium grade Clay Mitt or Towel is recommended. We also recommended first time users to choose the Fine grade Clay Mitt or Towel.