The IsoAcoustics ISO-L8R155 is a versatile desktop monitor stand that allows you to adjust the positioning of your studio monitors to suit your needs. Each ISO-L8R155 stand can be configured to heights of either 3 inches or 8 inches, using inserts that also allow you to tilt your speakers if required - ideal for if the speakers are positioned too high or too low to begin with. The design of the ISO-L8R155 also helps reduce surface vibrations for optimum sonic quality. IsoAcoustics ISO-L8R155 Desktop Monitor Stands (Pair) Main FeaturesHeight- and tilt-adjustable desktop stands Configurable between 3 and 8 inches Raise monitors off the supporting surface and away from surfaces to reduce reflections and vibrations 14 steps of height adjustment Compatible with a variety of speakers 6.10 x 7.5 inch platform
IsoAcoustic's unique patented design provides superior audio performance by supporting the PIF Principles in acoustic design.
Placement – proximity to adjacent and nearby surfaces. ISO-L8R155 audio stands raise the audio speakers or studio monitors off the supporting surface and away from adjacent surfaces to reduce reflections. Isolation – from supporting surfaces. Decoupling the audio speakers or studio monitors from the supporting surface reduces the energy from exciting other objects, and allows the speaker and enclosure to float independently. Focus – Raising and tilting the audio speakers and studio monitors creates an ideal listening position by forming an equilateral triangle from the speaker to the listener, with tweeters tilted to the listener's exact ear level. Height Adjustment
An important aspect of the speaker stand design is the ability to adjust the height and tilt angle of the supported speaker enclosure to optimise its position relative to the listener. Two lengths of tubing along with 2 sets of end-plug pairs provide 14 steps of height adjustment as the combinations are used to tilt the speaker up and down. The stand can be assembled and reconfigured repeatedly to establish the ideal position off the supporting surface and focused towards the listener. In a typical Desktop Audio Workstation configuration, the listener is positioned 3 to 4 feet from the monitors with ear level approximately 20 inches above the work surface. An enclosure containing an 8 inch speaker may position the high frequency driver 12 inches from the bottom while an enclosure with a 6 inch speaker may position the high frequency driver only 8 inches from the bottom. Raising and tilting these examples to their optimum position can easily be achieved with this speaker stand design. The ISO-L8R155 configuration is also suited for applications over longer distances such as in large recording studios or with consumer products where home stereo speakers may ideally need to be raised 6 inches off the floor and tilted up 8 degrees. Numerous combinations of height and tilt adjustment allow ideal listening position. Ideal for: Adam A5X, Adam A7X, Adam S1X, Alesis M1 Active 520, Alesis M1 Active 620, Alesis Monitor One mkII, Behringer MS40, JBL LSR2325P, KRK Rokit 5, KRK Rokit 6, KRK R6, KRK VXT 6, M-Audio BX5a, M-Audio DSM1, M-Audio CX5, M-Audio EX66, Mackie MR5, Samson Resolv A5, Samson Resolv A6, Samson MediaOne 4a, Samson MediaOne 5a, Samson GT, Yamaha HS50M, Yamaha MSP7, Yamaha MSP5, Yorkville YSM2P-II, Yorkville YSM5, Yorkville YSM6 montiors, and many more. IsoAcoustics ISO-L8R155 Specifications
Base Dimensions: 6.1 x 7.5 inches Listing correct at time of upload errors and omissions excepted. | 
