Complete 4 spring clutch assembly to fit BSA twin cylinder swingarm models A7, A10, Rocket Gold Star , Swingarm pre-unit singles Gold Star , B31 , B33.
Can be fitted to plunger and Rigid Pre-unit singles with the steel primary chaincases, with some slight modifications, contact us for details.

When set up correctly, the clutch operation is usually a light two finger operation giving a nice feel, positive action allowing easy selection of neutral at a standstill without any drag or crunch !

Our clutch differs from the usual ones available on the market , we carefully select the best quality parts available and combine with our own exclusively made special items , these are the centre adaptor with supporting thrust washer and most importantly our needle roller lift outer pressure plate kit.

The clutch centre adaptor has a large thrust washer that supports the chainwheel to prevent it from “wobbling” when the clutch is pulled in, this reduces clutch drag significantly.
The needle roller lift clutch pressure plate when the clutch lever is pulled in , makes the pressure plate lift off evenly from the clutch plates and spins straight and true , this gives a light positive feel to the clutch and again cuts down drag and means clutch springs do not have to be tensioned as much.

Also the steel plain plates have a special radius undercut at the corners where they slide over the centre drum, this also prevents the steel plates dragging and sticking to the centre drum.
All this combines to give you the best 4 spring replacement clutch available on the market.

Please note that we check and inspect each clutch component and hand assemble the clutch to check that all parts match to give you a quality item that will work correctly and fit without any hassles. This means a usual two day delay before despatch of any clutch assembly.

Kit includes:
Fitting and setting up instructions
Mainshaft woodruff key
Centre locking nut and washer
Centre mainshaft adaptor with felt backplate sealing washer
Chainwheel supporting thrust washer
Clutch roller bearings set
Centre clutch drum
Clutch spring pins, spring cups, springs and spring nuts
Clutch Chainwheel basket
Set of steel plain plates
Set of friction plates
SRM Needle roller lift pressure plate kit

And now includes clutch centre puller tool !

Upgrade is a direct fitment clutch ,for swingarm A7 A10 and Singles B31 B33 Gold Star models.

Will fit Singles rigid and plunger with some slight modification, usually shimming of front engine sprocket , and checking clearance of outer cover. Does not fit Plunger twin models A7 A10.

Existing Clutch pushrod will have to be shortened to fit the needle roller lift pressure plate kit, instructions are included with the kit.

NOTE CURRENTLY OUT OF STOCK DUE TO HIGH DEMAND, WILL BE AVAILABLE AGAIN IN December 2017