Self-lock 24V 1CH 433MHz Metal ABCD-Key Remote Control 4 Receiver 30M
Feature:
1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information;
2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed.
3.DC24V,1channels with 4 receivers two working modes, Inching Mode,Self-lock Mode(Factory Default).
4.Wireless coding technology no direction, switch can be used even if across the walls,switch also not disturb each other
5.Remote Distance: 30m (Theoretical value)
6.Can be applied to remote control of the on and off of pump,LED lights,garage door, electric gate, electric motor, machine-tool,alarm system and other civil and industrial supporting remote areas.
8.1 channel with 4 receivers,its function is the same as 4 channels,its advantage is that you can separately install the 4 different receivers at anywhere you want,but 4 channels can not realize because the 4 relays are on one board/receiver.
9.With Screwdriver and connecting wire,easier to connect the wiring.
10.Can control electrical equipment of more than 1000W
Specifications:
Color:Silver Black
Material:ABS& Metel
Brand name: BQLZR
Weight:144g
Transmitter:
Size:54x30x14mm/2.12x1.18x0.55 ""(L x W x H)
Operating Voltage: 12V
Operating Frequency: 433Mhz
Vibration Resistance: 126
Modulation: ASK (Stable, less interference)
Encode Type: Pads
Battery Type: 12V 27A(not included)
Remote Distance: 30m(Theoretical value)
Ambient TEMP: -30°C -70°C, Humidity<95%
Product DIM: 54x30x13mm
Receiver:
Size:23x37x52mm/0.90x1.45x2.04""(L x W x H)
Input Voltage: DC 24V
Operating Frequency: 433Mhz
Operation Way: Inching, Self-locking
Coding Way: Intelligent Learning
Output Type: 24V
Max load: 7A
Ambient TEMP: -20°C -65°C, Humidity<95%
Factory Default: Self-locking
Board DIM: 45x30.5x17mm
Case DIM: 60x38x13mm
Operation Way and Steps:
1. Factory Default is Self-lock Mode.
Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2. Each transmitter and receiver have been finished linking and factory default mode(Self-lock Mode) has been set up. When you receive them, you do not need to link again, you just need to connect the wiring according to our wiring diagram layout.
About two modes:
1)Inching Mode:
Press and hold the button A, the Receiver A (Relay A)turns on; Release the button A, the Receiver A (Relay A) turns off.
2)Self- lock Mode:
Press the button A, the Receiver A (Relay A) turns on; Press the button A again, the Receiver A (Relay A) turns off.
If you want to change the factory default mode to other working mode, below is the operation steps:
1. Clear:
Press and hold the learning button on the receiver board, the red light (Signal Light) will turn on and stay on for about 5 seconds, till the red light turns off, then release the learning button. It means clearing succeed, previous mode will not work after clearing successfully.
2. Choose the Working Mode:
Press and hold the learning button on the receiver, the red light will turn on and stay on for about 5 seconds, then turn off (Clearing Steps), do not release, still hold the learning button, and then the red light will begin to flash, it will flash once, then twice, and finally three times.
(1).After the light flashes ONCE, release the learning button, it becomes Inching Mode.
(2).After the light flashes TWICE, release the learning button, it becomes Self- lock Mode.
3. Link the remote control:
(After the Working Mode is chosen, you can start to link the remote control according to the mode you choose)
Press the learning button on the receiver until the red light turn on, and then release the learning button, the red light will stay on. Press the button on the transmitter you want to link, and the red light (Signal Light) on the receiver board will flash twice, at this time, it means that the transmitter and receiver finish linking. Then you can press the button on the transmitter, the related receiver will work as the mode you choose.
Note:
1.The receivers in our store are mainly used together with the related transmitter in our company. If you want to use your own transmitter, please confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours. If not, they will fail to be linked to. If you want to order the related one,we have unique transmitter as well.
2.How to confirm if the operating frequency, chip type and vibration resistance of your transmitter are in accordance with ours?
Connect the receiver board to give power for it,and the power light on the receiver board will turn green,press your transmitter,if the signal light on the board flash red light,it means your transmitter is in accordance with our receiver;if the signal light do nothing(not flash) when you press the transmitter,it means your transmitter can not be used for our receiver.
Package include:
1 X Transmitter (Battery is not included)
4 X Receiver
1 X Screwdriver
1 X Connect Wire
1 x Packing Box
