Audio-Technica
PRO 35 Cardioid Condenser Clip-On INSTRUMENT Microphone
PRO 35
Instrument Microphone System
Designed for sax,
toms, brass and percussion, the PRO 35 excels in high-SPL applications and is
ideal for active stage performances. Its extended frequency response captures
subtle nuances of the performance. The included UniMount® clip permits accurate
positioning and provides shock resistance while protecting the element. The
microphone’s cardioid polar pattern reduces pickup of sounds from the sides and
rear, improving isolation of the desired sound source.
Features:
Specifications:
ELEMENT: Fixed-charge
back plate, permanently polarized condenser
POLAR
PATTERN: Cardioid
FREQUENCY
RESPONSE: 50-15,000 Hz
LOW
FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT
SENSITIVITY: -45 dB (5.6 mV) re 1V at 1 Pa
IMPEDANCE: 250
ohms
MAXIMUM
INPUT SOUND LEVEL: 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC
RANGE (typical): 115 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE
RATIO: 64 dB, 1 kHz at 1 Pa
PHANTOM
POWER REQUIREMENTS: 11-52V DC, 2 mA typical
SWITCH: Flat,
roll-off
WEIGHT
(MICROPHONE): 0.3 oz (8 g)
WEIGHT
(POWER MODULE): 2.9 oz (81 g)
DIMENSIONS
(MICROPHONE): 0.98" (25.0 mm) long, 0.40" (10.2 mm) diameter
DIMENSIONS
(POWER MODULE)l 3.66" (92.9 mm) long, 0.74" (18.9 mm) diameter
OUTPUT
CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
CABLE: 6.0'
(1.8 m) long (permanently attached to microphone), 0.10" (2.6 mm)
diameter, 2-conductor, shielded cable with TA3F-type connector
ACCESSORIES
FURNISHED: AT8418 UniMount® microphone instrument mount; AT8538 power module;
soft protective pouch
AUDIO-TECHNICA
CASE STYLE: M36