4 Axis Nema23 Stepper Motor 76mm 270oz-in 3A 23HS8430B+TB6560 Driver USB CNC Kit

 for CNC Router Milling Engraving Machine

Package:
  • 1 x 4 Axis TB6560 USB CNC Driver Board
  • 4 x 23HS8430 stepper motor
  • 1 x 250W 24V/15A switching power supply
  • 1 x hand remote controller
  • 1 x USB cable
  • 1 x DB9 parallel cable
  • 1 x Fan,4pcs M4 screw
  • English user manual for 4 axis driver board will send by email

4pcs 57-76 USB .jpg

4 axis TB6560T4V3 cnc controller USB port


 Feature:

  1. It is 4 axis and connect with computer,power supply,and stepper motor will be a compelet cnc electric controller kit.
  2. 4 decay mode and fit for small than 3A 2 phase stepper motor.
  3. It can connect 8-way limit switch(each axis with up and down limit),this is more advantage than mach3.
  4. It can connect with manual control which could be with off-line work too,it is convenience to adjust the coordinate when tool setting.
  5. 4 current setting:0.75/1.5/2.25/3A.
  6. Extend 3-way relay port which can control as spindle stop-start,water-cooling,and mist spray switch.
  7. Automatic current down,it will be 25% of full current when stepper motor stopped to protect the motor and IC chip.
  8. With 12VDC power supply and for customer connect with 12VDC application or with fan.
  9. The software is USBCNC,not mach3,pls note this. 

 

 

  

New version USB6560T4V3 compare with USB6560T4V2 different:

  1. PAUSE & RESET port are set.
  2. A new Shield is set for the main control IC,it make the system more Stable.
  3. Manual control speed can be set by a Rheostat.
  4. The circle is Optimized,

This item is easy to operate for DIY hobby user,but it is control by USB port,so need more careful for the software install,and pls must be strict read the user manual and follow us.

 

 

2. Stepper Motor

Technical Specifications

Part No.:   23HS8430

Frame Size:    NEMA23

Step Angle:      1.8 degree

Current:           3.0A/phase

Resistance:      1.0 Ohm/phase

Inductance:      3.5 mH/phase

Holding torque: 180N.cm/18kg-cm     270 oz-in

Rotor inertia:    440g-cm2

Number of wire leads:   4

Weight:            1.10 kg

Length:             76mm

Datasheet(23HS8430,8mm diameter shaft,270oz-in or 18kg.cm holding torque)

23HS 8430.jpg

 

 

57motor 8mm dra.jpg

 

Wiring:

RED:       A+

GREEN:   A-

YELLOW: B+

BLUE:     B-

 

3.Switching power supply

350W,Input:100-120VAC or 200-240VAC,50/60Hz,Output:24v/15A,single output switching power supply


1.We accept Paypal for payment.Any more questions, please feel free to contact us. we will offer you satisfying answer.Thanks.

2.Please pay within 3 days of order.

1. Items are only shipped after payment is received.

2. Please check out your address carefully when processing order.We are not responsible for wrong or undeliverable address.

1.Any reason required for all refund. Item must be in it's original condition and no physical damage,buyer responsible for all shipping cost.

2.When you have the parcel,and not satisfied the goods or it is other problem like as broken,pls tell us the detail reason and provide the photos.

1. We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important.

2.Please contact us before leaving any negative or neutral feedback. We will help you to solve any problems..