Replacement Magnetron Suits Many Sharp LG Samsung Microwave Ovens

Magnetron type 2M210-M1 for microwave ovens. This magnetron is a suitable replacement type for many brands of oven. This particular magnetron is classed as an off line version which means that the mounting lugs are not in line with the airflow through the cooling vents. This is a common mounting arrangement in many ovens. The magnetron in question is a high quality type sourced directly from Panasonic. It does not have to be used in a Panasonic oven. If your defective magnetron is an off line version then this magnetron should fit. Have a close look at the photographs and the mounting lugs to determine this. Many of the microwaves fitted to modern fitted kitchens use an off line magnetron like this. The magnetron specifications are as follows: *  Fixing centres: 36mm x 112mm * Mounting lug size: 12mm x 16mm * Nominal power rating 850W * Operation frequency: 2455MHz As mentioned previously this magnetron can be fitted to any brand of oven with a defective magnetron that looks like this one. Check the air flow direction and orientation of the lugs before ordering. You can fit this magnetron to any oven with a power rating up to around 1000W. The nominal power level of this magnetron is 850W but it is common practice by manufacturers to operate a magnetron at the upper end or slightly higher end of its specification. In practice this is not an issue as microwave ovens are most commonly used for short periods of time. If you purchase this item for replacement in your microwave then we recommend that you do this only if you are qualified and aware of the dangers of tampering with electrical equipment. Please see our other listings for other microwave parts for these and other models: * Oven lamps * Microwave fuses If the high voltage fuse has also failed then check out our microwave parts section. You can purchase either a glass tube or a complete fuse and holder. Use the glass tube where possible as it is cheaper

850Watt, OFF-line, 

4.1KV, STANDART TYPE, H-CONFIGURATION

80X95mm BODY, 100mmHIGHT

 6.4mm spade terminals

 Not suit invertor models

We advice : due to very high voltage, better to be replaced with qualified person

WE STOCK OTHER TYPES MAGNETRONS AS WELL FOR THE SAME PRICE JUST EMAIL US