Store category
You may also like
Product Description
This remote switch allows you to remotely control any 12 Volt DC device. Perfect for controlling any 12V devices such as Lights, Fans, Landscaping Lighting and more. This easy-to-wire kit is perfect for anybody with a basic knowledge of electrical wiring, and can easily be wired to many 12V applications. For PC Modders, the end of result of the Remote Control 12VDC kit is truly impressive and is sure to impress the crowds. For DIYers, the kit will give some magical effect to your projects.
Encoding and Decoding
The popular link is like this: MCU -> Encoder -> Transmitter ------ Receiver -> Decoder -> MCU,
PT2262(Encoder) are optional, their existence is to 1)avoid confusing when multiple RF links in range 2) isolate disturbance.
The popular link is like this: MCU -> Encoder -> Transmitter ------ Receiver -> Decoder -> MCU,
PT2262(Encoder) are optional, their existence is to 1)avoid confusing when multiple RF links in range 2) isolate disturbance.
You can integrate the encoding and decoding work to the MCUs on both side. Whenever there is no 433.92MHz devices around, you may use it as direct cable connection.
Extra transmitter : https://www.ebay.com/itm/SC2262-PT2262-PT2264-433MHZ-ASK-OOK-Encoders-RF-Wireless-Transmitter-Modules/281040355304?rt=nc&_soffid=200&_soffType=SaleAndClearence&_trksid=p5731.m3795
Qty : 1 pcs PT2262 transmitter module and 1 pcs 4 channels relay switch ;
| Model No. |
TB195 Encoder Transmitter |
| Function discription |
Encoder Transmitter modules |
| Operating voltage |
3V ~ 12V DC |
| Static current |
max≤8mA(12V)， min≤2mA(3V) |
| Operating frequency |
433MHz |
| modulation Mode |
ASK/OOK |
| SAW Frequency stability |
±150kHz(max) |
| Transmitter Power |
50mW (315MHz, 12V) |
| Data rate |
≤10Kbps |
|
Antenns length |
24 cm (315 MHz), 18 cm (433.92 MHz) |
| Dimension |
36 * 27mm |
| Encodeing format | PT2264 fixing code (same as PT2262 SC2262 ) ，Work with PT2272 decoder IC |
| Transmitter distance | 300-500M (open area) |
Connect to MCU or Arduino :
Connect to Switch:
Relay receiver :
Technical indicators:
1.operating voltage: DC 12V ;
2.static operating current:≤6mA;
3.Working temperature :-20°C- +80°C;
4.Receive sensitivity:≥-105dBm;
5.the working frequency:433.92MHz ;
6.output current:≤10A;
7.size:74.5*54.5*27mm ;
8: Momentary Mode ,Latch Mode , Toggle Mode can be adjustable by jumper .
9. Pls connect the receiver modules properly before power supply ;
10: 4 chanels;
11: Learning function (can works with EV1527 and PT2262 remote , can store 16 pcs different code remote );
12: Max load : 1000W;
9. Pls connect the receiver modules properly before power supply ;
10: 4 chanels;
11: Learning function (can works with EV1527 and PT2262 remote , can store 16 pcs different code remote );
12: Max load : 1000W;
Advantage :
1: Receiver Mother board have a learning key , if the remote is lost , must buy EV1527 Learning remotes to re-learn;Output:
A.singnal Inter-locking (Latch)----connect 1 and 2 ;
B.singnal Self-locking (Toggle) ---- connect 2 and 3 ;
C.singnal Non-locking (Momentary ) ---- disconnect the jumper ;
Inter-locking (Latch): 4-way relay each other to switch, when relay A is working and locked , relay B C D corresponding to switch off; when B is working and locked , corresponding relay A C D swith off ; Only 1 relay is on among 4 relays A B C D;
Non-locking type (Momentary): Press A and hold it , then A is on.Same as Relay B C D ;
Self-lock type (Toggle): 4 chanels opens and closes independently, 4 chanels can work together ,they don’t affect each other . press A button, A relay of work and locked, press again then disconnected; Same as B C D .
Learning method and steps
1. Keep pressing learnig key on receiver board , release the button when LED is off , enter the learning state ;
2. Press any key on remote control within 5 seconds , LED flash 3 times and then turn on , then it have success in learning .
Clear the deposit information
Keep Pressing Learning Key , LED turns off , Wait 10 Seconds , LED turn on , that deposited information has been successfully cleared ;
★Introduction for Shenzhen Canton-electronics Trading Co.,Ltd :
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.
We specialize in RF Wireless Radio Transmitting Units and Receiving Units, the product include transmitters with case, receivers with relay(s), transmittng modules and receiving modules, are widely applied in RC toy, remote sensing, telemetry, fireworks, industrial control, home&garden application.
★Shipping:
Normally shipping is by Airmail from China Post Air Mail or Hong Kong Post Air Mail ,15-60 days shipping time based on different country .
Express is available, shipping time is 2-7 days all over the world, and telephone number is needed. Please contact us first for extra payment .
★Benefits
The Best Prices. By working with Canton-electronics Ltd, you can take advantage of the internet business, cut off the wholesalers cost and other costs, and import your products directly from the manufacturer at incredible prices.
Prompt Delivery. Most units are in stock all the time, standard units will be completed within 1-3 days if they are sold out, it is great help for you if your project must be completed before deadline.
Prompt Service. Mails will be replied within 24 hours We work 6 days a week.
★Return Policy
All mails will be replied to within 24 hours except on weekend and holidays.
Every item is manufactured under Strict Quality-Assurance Guidelines. If you are dissatisfied for any reason, please return the product to us, and we'll refund your money(not including shipping fees).
Please ensure that return items are not used.
Return items must be Posted within 7 days of receipt.
Please inform us via email before posting your return package.
★PAYMENT
•We accept PayPal only.
•We only ship item to your PayPal verified address.
•Payment must be received within 3 Days from the date of purchase.
•Please leave note in PayPal when making the payment if you have any special request (colors/size).
★Import tax :
We will dispatch the item as Electronic Modules, label the total amount on the custom declare invoice .
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to buying.
