- Power:W
- Brand Name:opcom
- Model Name:opcom
- Item Width:21 inch
- Car Maker:Opel
- Material Type:Plactis
- Item Height:11 inch
- Voltage:v
- Language:English
- Special Features:diagnostic tool
- Item Type:Car Diagnostic Cables and Connectors
- Item Length:15 inch
- Item Weight:0.2 kg
Opcom OP-Com 2010 V Can OBD2 Opel Firmware V1.45
Highlights:
1. Software Version: 201008
Hardware Version: 1.45
2. OP-COM - PC based Opel diagnostic
3. OP-COM is a PC based diagnostic program.
OPCOM 2010 Function:
1. It covers almost all Opel cars, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3.
The program supports many control units, like Engine, Automatic
Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster,
Electronic Climate Control, Body Control Unit, just to name a few
examples.
4.
Since Opel uses many pin in the OBD connector, the diagnostic interface
works as a multiplexer, and selects the appropriate pin for
communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2010 Feature:
1) Full status information (Present, Not present, Intermittent)
2)
You can print out, save, or copy the fault codes to any other
application. From the fault codes window, you can go directly to the
measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4)
The program is capable of showing 8 measuring block parameter
simultaneously. The sample rate is depends mostly on the communication
protocol. For example, older system, like Omega-B X 25 DT Engine
(ISO-9141-2) can be very slow, during communication, while newer Multec,
or Bosch units are faster (using KWP-2000), and the newest CAN based
control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
Package List:
1. OP COM Interface
2. USB Cable
3. Software and Drivers CD
* Please note that any problem with the CD, broken or blank or missing, you can contact me to get the software program via email.
* The driver software is not signed. You may have some difficulties to install if you are using Windows Vista or Win 7- 64 bit. I recommend to use Win XP or Win 7 - 32 bit. It is the same in the market in mainland China. I cannot afford the signed driver at this price. Hope you can understand.