RENAULT IMMO KILLER 2
| RENAULT DECODING TOOL 2 IMMO KILLER ECU DECODER IMMO REPAIR |
|---|
| MY EBAY |
|
Other Selling Items
|
|
| CUSTOMER SERVICE |
|
Any problem with my products or services, please send email to lp.tsop@ytsyzc or send by ebay message
Emails and messages are answered within 24 hours
I'm always here to provide help. If you are not satisfied with my products or services, before you leave neutral or negative feedback, or open dispute, please contact with me first. I'm sure that I can find out a solution to keep Your satisfied
|
|
| PAYMENT |
|
I accept payment by:
PayPal
Bank Transfer
|
|
| SHIPPING |
Polish Registered Priority Airmail
Delivery time:
Europe: 3-10 days
North America: 5-21 days
Asia, Australia: 2-4 weeks
South America, Africa: 2-6 weeks
|
|
| RETURNS & WARRANTY |
|
All items come with 1 year warranty
All the products we sell are brand new. In case of item arrives faulty, please contact us and send it back, we provide replacement or full refund to buyers
Returns accepted within 14 days of receipt. Item must be returned undamaged with all original accessories
Returning shipping cost is paid by buyer
|
| DESCRIPTION |
|---|
From the year 1994 most Renault cars are equipped with engine immobilizer system and it makes replacement of injection computer more complicated. There is no problem if replacement ECU is bought from Renault service dealer - it is sold with no immobilizer code stored, but replacing damaged computer with used one is impossible because of mismatch of unlocking codes.
Renault Decoding Tool 2 has several modes of operation and covers all known petrol and diesel injection systems, introduced in range of year 1994-2001 without intervention in to the ECU (diesel coded anti-start valve as well). After decoding process is completed, control unit became decoded - as it was bought from dealer. ECU must be taken out from the car and connected to the decoding tool according to user manual. Decoding of engine control units manufactured in range of year 1994-1996 is semi-automatic, from year 1996 - fully automated. Especially this tool can be useful when rubber-filled FENIX5, SAFIR2 or coded diesel anti-start valve must be decoded. This tool will decode all listed type 1 and 2 immobilizer systems.
Systems this tool was tested with:
GASOLINE
SIEMENS FENIX3
SIEMENS FENIX5
SIEMENS SIRIUS32
SAGEM SAFIR (55pin)
SAGEM SAFIR2 (35pin)
BOSCH MOTRONIC MP7.0
MAGNETI MARELLI IAW 06R
|
DIESEL
BOSCH MSA15.5 (DTI)
BOSCH EDC15C3 (DCI)
LUCAS DCU3R (1.9D)
Coded fuel cut-off valve (1.9D DDS)
|
| Different between Renault Decoding Tool and Renault Decoding Tool 2 |
| Device version |
V-1 |
V-2 |
| Number of wires |
4 |
7 |
| Requires an additional relay for the duration of decoding certain types of ECU's |
YES |
NO
relay is build-in |
| Required to connect an external indicator MIL lamp |
YES |
NO
MIL lamp is build-in |
Button to check the status of the ECU
Only for ECU's with "MIL" lamp signal |
NO |
YES |
Decoding tool is stand-alone, no PC is required.
NOTE:
The following ECU's will need a valid immo code:
Some of FENIX5 for LAGUNA/SAFRANE 2.0l 16V
All of SIRIUS32 except for KANGOO 1.4l 16V - You can use the immo emulator on this ECU after decoding
LUCAS DCU3R, Bosch MSA15.5 and EDC15C3
This means that after the decoding procedure on one of these ECU is done, you must have the immobilizer system fully operational (matching key) to start the engine.
Otherwise after decoding the above ECU's you can use a Renault emulator as found on other my auctions or avible for extra price.
Additional info on request.
Package Included:
1 x Renault ECU Decoder 2 Immo Killer made in EU
1 x Complete english user manual with wirring diagrams and tables to convert MIL blinks to immo TYPE1 PIN code (electronic version)
NOT MADIE IN CHINA
|
|
