Features:
The clapper is a sound activated on and off switch for applicances.
While in the HOME mode, the clapper can operate either one or two appliances
by clapping two times to operate the first appliance and three times to operate the
second appliance. (More details please refer to the instruction manual.)
While in AWAY setting, the clapper can serve as a limited function security device
instruders, also, it is convenient for temporarily turning on a light when entering a dark
room such as a garage or a basement.
You can adjust your clapper to respond to soft or loud claps as well as adjusting for
the noise level in your room. (More details please refer to the instruction manual)
The three lights on the face of the clapper will help you determine the proper way to
clap your applicances on or off -- each clap detection light will grow when a proper clap
or a similar sound is detected. (Note: Claps that are too soft, too fast, or too slow will
not be detected, as a result, the clap detection lights will not glow, and the appliance
will not activate. -- More details please refer to the instruction manual.)

Specifications:
Type: On/ Off sound activated switch
Voltage: 110V
Plug Standard: US
Color: White
Support up to 2 applicances
Size:95*88*37mm
Net weight: 83g
Package weight:93g

Instructions:
How to operate an appliance with 2 claps:
Set Sensitivity Dial to HOME
Plug appliance into left receptacle of the clapper(below the "II") -- the maximun
wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles,
the combined total wattage can not exceed 400W.
Plug clapper into the wall socket.
Manually turn appliance on -- the indicator light to the left of the "II" will glow when
the appliance has been manually turned on, but is clapped off.
You can now turn on or off by clapping. You don't have to clap very hard. The clapping
sequence is more important than how loudly you clap -- when each pause is approximately
1/2 to 1 second long, the three pauses after the second clap are very important since the
clapper must determine that you are not going to clap a third time. If you clap a third time,
the appliance connected to the two clap receptacle would not activate.
How to operate an appliance with 3 claps:
Set Sensitivity Dial to HOME
Plug appliance into right receptacle of the clapper(below the "III") -- the maximum
wattage per outlet is 250W. If you are using both the 2 clap and 3 clap receptacles,
the combined total wattage can not exceed 400W.
Plug clapper into the wall socket.
Manually turn appliance on -- the indicator light to the right of the "III" will glow when the
appliance has been manually turned on, but is clapped off.
You can now turn on or off by clapping. You don't have to clap very hard. The clapping
sequence is more important than how loudly you clap -- when each pause is approximately
1/2 to 1 second long, the last pause after the thid clap is very important since the clapper
must determine that you are not going to clap a fourth time.
If you clap a fourth time, the appliance would not activate.

Note:
Do not use the clapper with any electrical heating appliance such as toasters, hair dyers etc.
Do not use the clapper with any appliance that can create a fire hazard with prolonged use.

Package Include:
1 x Clapper