Brand New
3 in 1 LiPo, LiFe Balancer
Features:
• Measure Battery Voltage Precisely
• Balance Cell Voltage in Battery Pack
• Discharge Battery For long Time Staorge
This device is for quickly checking your lipo battery.
It gives an instant voltage reading for each individual cell of the pack (up to 6s).
can balance your pack down to the voltage of the lowest cell in charged or discharge state.
Can discharge you cells to a preset level for storage or prior to charging.
you can also check your receiver battery with JST or Futaba/JR type plug.
Operation is simple and the power for the device comes from the pack
being tested - simply plug the pack in to the appropriate socket.
Spec Check
Dimension 93.5 x 60 x 17mm
Display LCD
Total voltage display 3.2v to 25.99v
Unit Voltage display 3.2v to 4.49v
Accuracy +0.003v
- Measurable battery type and amount: Li-Polymer / Li-Fe 2-6 cell (standard voltage 7.4V - 22.2V using divided voltage connector)
- Balance voltage setting range (lower limit): 2.0V - 3.9V (pre setting value 3.2V)
- Receiver battery voltage testing: 1.2V - 8.5V DC (Not limited
to battery type, but requires external power 7.4 - 11.1V Li-Polymer /
Li-Fe (use JST balance connector)
- Discharge voltage setting range (lower limit): 3.0V - 4.2V (pre-setting value 3.9V)
- JST XH Balance connectors